lkml.org 
[lkml]   [2020]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/3] soc: qcom: Introduce Protection Domain Restart helpers
On Wed 04 Mar 12:09 PST 2020, Sibi Sankar wrote:
> diff --git a/drivers/soc/qcom/pdr_interface.c b/drivers/soc/qcom/pdr_interface.c
[..]
> +static int pdr_locate_service(struct pdr_handle *pdr, struct pdr_service *pds)
> +{
> + struct servreg_get_domain_list_resp *resp;
> + struct servreg_get_domain_list_req req;
> + struct servreg_location_entry *entry;
> + int domains_read = 0;
> + int ret, i;
> +
> + resp = kzalloc(sizeof(*resp), GFP_KERNEL);
> + if (!resp)
> + return -ENOMEM;
> +
> + /* Prepare req message */
> + strcpy(req.service_name, pds->service_name);
> + req.domain_offset_valid = true;
> + req.domain_offset = 0;
> +
> + do {
> + req.domain_offset = domains_read;
> + ret = pdr_get_domain_list(&req, resp, pdr);
> + if (ret < 0)
> + goto out;
> +
> + for (i = domains_read; i < resp->domain_list_len; i++) {
> + entry = &resp->domain_list[i];
> +
> + if (strnlen(entry->name, sizeof(entry->name)) == sizeof(entry->name))
> + continue;
> +
> + if (!strcmp(entry->name, pds->service_path)) {
> + pds->service_data_valid = entry->service_data_valid;
> + pds->service_data = entry->service_data;
> + pds->instance = entry->instance;
> + goto out;
> + }
> + }
> +
> + /* Update ret to indicate that the service is not yet found */
> + ret = -ENXIO;
> +
> + /* Always read total_domains from the response msg */
> + if (resp->domain_list_len > resp->total_domains)
> + resp->domain_list_len = resp->total_domains;
> +
> + domains_read += resp->domain_list_len;
> + } while (domains_read < resp->total_domains);
> +out:
> + kfree(resp);
> + return ret;
> +}
> +
> +static void pdr_notify_lookup_failure(struct pdr_handle *pdr,
> + struct pdr_service *pds,
> + int err)
> +{
> + list_del(&pds->node);
> +
> + if (err == -ENXIO)
> + pds->state = SERVREG_LOCATOR_UNKNOWN_SERVICE;
> + else
> + pds->state = SERVREG_LOCATOR_ERR;
> +
> + pr_err("PDR: service lookup for %s failed: %d\n",
> + pds->service_name, err);
> +
> + mutex_lock(&pdr->status_lock);
> + pdr->status(pds->state, pds->service_path, pdr->priv);
> + mutex_unlock(&pdr->status_lock);
> + kfree(pds);

So this implies that we didn't find the service and we will never find
it? How are the client drivers expected to react to above two states?

> +}
> +
> +static void pdr_locator_work(struct work_struct *work)
> +{
> + struct pdr_handle *pdr = container_of(work, struct pdr_handle,
> + locator_work);
> + struct pdr_service *pds, *tmp;
> + int ret = 0;
> +
> + /* Bail out early if the SERVREG LOCATOR QMI service is not up */
> + mutex_lock(&pdr->lock);
> + if (!pdr->locator_init_complete) {
> + mutex_unlock(&pdr->lock);
> + pr_debug("PDR: SERVICE LOCATOR service not available\n");
> + return;
> + }
> + mutex_unlock(&pdr->lock);
> +
> + mutex_lock(&pdr->list_lock);
> + list_for_each_entry_safe(pds, tmp, &pdr->lookups, node) {
> + if (!pds->need_locator_lookup)
> + continue;
> +
> + pds->need_locator_lookup = false;
> + ret = pdr_locate_service(pdr, pds);
> + if (ret < 0)
> + pdr_notify_lookup_failure(pdr, pds, ret);

If I read this correctly, pdr_locate_service() returning an error seems
to mean that pd->instance won't be filled out, as such I don't think you
want to proceed.

Further more, pdr_notify_lookup_failure() ends up freeing the pds, so
below lookup would be a use after free, not unlikely followed by a
double free of pds.

How about a "continue" here and only clear need_locator_lookup if both
of these checks pass?

> +
> + ret = qmi_add_lookup(&pdr->notifier_hdl, pds->service, 1,
> + pds->instance);
> + if (ret < 0)
> + pdr_notify_lookup_failure(pdr, pds, ret);
> + }
> + mutex_unlock(&pdr->list_lock);
> +}

Apart from that I think the patches look good now.

Regards,
Bjorn

\
 
 \ /
  Last update: 2020-03-08 22:33    [W:0.054 / U:7.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site