lkml.org 
[lkml]   [2020]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/5] ARM: dts: rockchip: fix rockchip,default-sample-phase property names
Date
A test with the command below does not detect all errors
in combination with 'additionalProperties: false' and
allOf:
- $ref: "synopsys-dw-mshc-common.yaml#"
allOf:
- $ref: "mmc-controller.yaml#"

'additionalProperties' applies to all properties that are not
accounted-for by 'properties' or 'patternProperties' in
the immediate schema.

First when we combine rockchip-dw-mshc.yaml,
synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives
for example this error:

arch/arm/boot/dts/rk3036-evb.dt.yaml: mmc@1021c000:
'default-sample-phase' does not match any of the regexes:
'^.*@[0-9]+$', '^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|
uhs-(sdr(12|25|50|104)|ddr50))$', 'pinctrl-[0-9]+'

'default-sample-phase' is not a valid property name for mmc nodes.
Fix this error by renaming it to 'rockchip,default-sample-phase'.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm/boot/dts/rk3036-kylin.dts | 2 +-
arch/arm/boot/dts/rk3036.dtsi | 2 +-
arch/arm/boot/dts/rk322x.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index fb3cf005c..2ff9f152d 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -319,7 +319,7 @@
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
- default-sample-phase = <90>;
+ rockchip,default-sample-phase = <90>;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index c28d293df..2226f0d70 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -263,7 +263,7 @@
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- default-sample-phase = <158>;
+ rockchip,default-sample-phase = <158>;
disable-wp;
dmas = <&pdma 12>;
dma-names = "rx-tx";
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index b98579035..8ad44213f 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -698,7 +698,7 @@
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
bus-width = <8>;
- default-sample-phase = <158>;
+ rockchip,default-sample-phase = <158>;
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
--
2.11.0
\
 
 \ /
  Last update: 2020-03-07 14:50    [W:0.079 / U:38.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site