lkml.org 
[lkml]   [2020]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: xhci: Error enumerating USB TV Tuner
Date
Unable to complete the enumeration of a USB TV Tuner device.

Per XHCI spec (4.6.5), the EP state field of the input context shall
be cleared for a set address command. In the special case of an FS
device that has "MaxPacketSize0 = 8", the Linux XHCI driver does
not do this before evaluating the context. With an XHCI controller
that checks the EP state field for parameter context error this
causes a problem in cases such as the device getting reset again
after enumeration.

When that field is cleared, the problem does not occur.

This was found and fixed by Sasi Kumar.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
drivers/usb/host/xhci.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index dbac0fa9748d..5f034e143082 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1428,6 +1428,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
xhci->devs[slot_id]->out_ctx, ep_index);

ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
+ ep_ctx->ep_info &= cpu_to_le32(~EP_STATE_MASK);/* must clear */
ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));

--
2.17.1
\
 
 \ /
  Last update: 2020-03-06 17:09    [W:0.069 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site