lkml.org 
[lkml]   [2020]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream
Date
The property is needed in order to trigger VL805's firmware load. Note
that there is a gap between the property introduced and the previous
one. This is also the case downstream.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
include/soc/bcm2835/raspberrypi-firmware.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 7800e12ee042..cc9cdbc66403 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -90,7 +90,7 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045,
RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049,
RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050,
-
+ RPI_FIRMWARE_NOTIFY_XHCI_RESET = 0x00030058,

/* Dispmanx TAGS */
RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,
--
2.25.1
\
 
 \ /
  Last update: 2020-03-06 12:44    [W:0.083 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site