lkml.org 
[lkml]   [2020]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration
Date
i.MX8MQ Phanbell board uses Realtek RTL8211FD as Ethernet PHY.
Its datasheet states that the proper post reset duration should be at least 50 ms.

Fixes: f34d4bfab354 ("arm64: dts: imx8mq-phanbell: Add support for ethernet")
Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
---
arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index 16ed13c44a47..06e248b95ada 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -207,7 +207,7 @@
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
phy-reset-duration = <10>;
- phy-reset-post-delay = <30>;
+ phy-reset-post-delay = <50>;
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
--
2.17.1
\
 
 \ /
  Last update: 2020-03-06 11:42    [W:0.034 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site