lkml.org 
[lkml]   [2020]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: bcm283x: Use firmware PM driver for V3D
From
Date
Hi Stefan,

On Tue, 2020-03-03 at 20:24 +0100, Stefan Wahren wrote:
> > > > Note: I tested this on RPi3b, RPi3a+ and RPi2b.
> > > as i already wrote this prevent X to start on current Raspbian on my
> > > Raspberry Pi 3A+ (multi_v7_defconfig, no u-boot). We must be careful here.
> > >
> > > I will take a look at the debug UART. Maybe there are more helpful
> > > information.
> > It seems we're seeing different things, I tested this on raspbian
> > (multi_v7_defconfig) and on arm64. I'll try again from scratch tomorrow.
>
> My modifications to the Raspbian image (from 13.2.2020) are little:
>
> - specify devicetree to config.txt
> - change console to ttyS1 and remove "silent" in cmdline.txt
> - rename all original kernel7*.img
> - copy dtb and kernel7.img to boot partition
> - copy kernel modules to root partition

Would you mind retesting with the latest linux-next? I validated an image based
on 5.6.0-rc4-next-20200305-00001-g285a7a64cd56 and a fresh raspbian download on
RPi3a+ without X issues.

> The debug UART works fine, maybe the dmesg gives us a hint:

[...]

> [ 8.451520] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi
> mapping ok
> [ 8.451541] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name!
> [ 8.465617] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops
> [vc4])
> [ 8.466033] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])
> [ 8.466159] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
> [ 8.466292] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
> [ 8.466649] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops
> vc4_crtc_ops [vc4])
> [ 8.466889] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops
> vc4_crtc_ops [vc4])
> [ 8.467154] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops
> vc4_crtc_ops [vc4])
> [ 8.467262] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
> [ 8.467272] checking generic (1e330000 8ca000) vs hw (0 ffffffff)
> [ 8.467278] fb0: switching to vc4drmfb from simple
> [ 8.473639] Console: switching to colour dummy device 80x30
> [ 8.473714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 8.473718] [drm] Driver supports precise vblank timestamp query.
> [ 8.476777] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
> [ 8.534359] Console: switching to colour frame buffer device 90x30
> [ 8.550245] vc4-drm soc:gpu: fb0: vc4drmfb frame buffer device

I get the exact same results as you here.

Regards,
Nicolas

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-03-05 11:45    [W:0.070 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site