lkml.org 
[lkml]   [2020]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 11/42] docs: scsi: convert BusLogic.txt to ReST
From
Date
On 3/2/20 1:15 AM, Mauro Carvalho Chehab wrote:
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../scsi/{BusLogic.txt => BusLogic.rst} | 89 +++++++++++++------
> Documentation/scsi/index.rst | 1 +
> drivers/scsi/BusLogic.c | 2 +-
> drivers/scsi/Kconfig | 2 +-
> 4 files changed, 67 insertions(+), 27 deletions(-)
> rename Documentation/scsi/{BusLogic.txt => BusLogic.rst} (93%)


Acked-by: Khalid Aziz <khalid@gonehiking.org>

--
Khalid

>
> diff --git a/Documentation/scsi/BusLogic.txt b/Documentation/scsi/BusLogic.rst
> similarity index 93%
> rename from Documentation/scsi/BusLogic.txt
> rename to Documentation/scsi/BusLogic.rst
> index 48e982cd6fe7..b60169812358 100644
> --- a/Documentation/scsi/BusLogic.txt
> +++ b/Documentation/scsi/BusLogic.rst
> @@ -1,6 +1,11 @@
> - BusLogic MultiMaster and FlashPoint SCSI Driver for Linux
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=========================================================
> +BusLogic MultiMaster and FlashPoint SCSI Driver for Linux
> +=========================================================
>
> Version 2.0.15 for Linux 2.0
> +
> Version 2.1.15 for Linux 2.1
>
> PRODUCTION RELEASE
> @@ -8,13 +13,16 @@
> 17 August 1998
>
> Leonard N. Zubkoff
> +
> Dandelion Digital
> +
> lnz@dandelion.com
>
> Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
>
>
> - INTRODUCTION
> +Introduction
> +============
>
> BusLogic, Inc. designed and manufactured a variety of high performance SCSI
> host adapters which share a common programming interface across a diverse
> @@ -86,9 +94,11 @@ Contact information for offices in Europe and Japan is available on the Web
> site.
>
>
> - DRIVER FEATURES
> +Driver Features
> +===============
>
> -o Configuration Reporting and Testing
> +Configuration Reporting and Testing
> +-----------------------------------
>
> During system initialization, the driver reports extensively on the host
> adapter hardware configuration, including the synchronous transfer parameters
> @@ -130,7 +140,8 @@ o Configuration Reporting and Testing
> The status of Wide Negotiation, Disconnect/Reconnect, and Tagged Queuing
> are reported as "Enabled", Disabled", or a sequence of "Y" and "N" letters.
>
> -o Performance Features
> +Performance Features
> +--------------------
>
> BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
> support has been included in the driver to utilize tagged queuing with any
> @@ -150,7 +161,8 @@ o Performance Features
> queue depth of 1 is selected. Tagged queuing is also disabled for individual
> target devices if disconnect/reconnect is disabled for that device.
>
> -o Robustness Features
> +Robustness Features
> +-------------------
>
> The driver implements extensive error recovery procedures. When the higher
> level parts of the SCSI subsystem request that a timed out command be reset,
> @@ -174,7 +186,8 @@ o Robustness Features
> lock up or crash, and thereby allowing a clean shutdown and restart after the
> offending component is removed.
>
> -o PCI Configuration Support
> +PCI Configuration Support
> +-------------------------
>
> On PCI systems running kernels compiled with PCI BIOS support enabled, this
> driver will interrogate the PCI configuration space and use the I/O port
> @@ -184,19 +197,22 @@ o PCI Configuration Support
> used to disable the ISA compatible I/O port entirely as it is not necessary.
> The ISA compatible I/O port is disabled by default on the BT-948/958/958D.
>
> -o /proc File System Support
> +/proc File System Support
> +-------------------------
>
> Copies of the host adapter configuration information together with updated
> data transfer and error recovery statistics are available through the
> /proc/scsi/BusLogic/<N> interface.
>
> -o Shared Interrupts Support
> +Shared Interrupts Support
> +-------------------------
>
> On systems that support shared interrupts, any number of BusLogic Host
> Adapters may share the same interrupt request channel.
>
>
> - SUPPORTED HOST ADAPTERS
> +Supported Host Adapters
> +=======================
>
> The following list comprises the supported BusLogic SCSI Host Adapters as of
> the date of this document. It is recommended that anyone purchasing a BusLogic
> @@ -205,6 +221,7 @@ that it is or will be supported.
>
> FlashPoint Series PCI Host Adapters:
>
> +======================= =============================================
> FlashPoint LT (BT-930) Ultra SCSI-3
> FlashPoint LT (BT-930R) Ultra SCSI-3 with RAIDPlus
> FlashPoint LT (BT-920) Ultra SCSI-3 (BT-930 without BIOS)
> @@ -214,15 +231,19 @@ FlashPoint LW (BT-950) Wide Ultra SCSI-3
> FlashPoint LW (BT-950R) Wide Ultra SCSI-3 with RAIDPlus
> FlashPoint DW (BT-952) Dual Channel Wide Ultra SCSI-3
> FlashPoint DW (BT-952R) Dual Channel Wide Ultra SCSI-3 with RAIDPlus
> +======================= =============================================
>
> MultiMaster "W" Series Host Adapters:
>
> +======= === ==============================
> BT-948 PCI Ultra SCSI-3
> BT-958 PCI Wide Ultra SCSI-3
> BT-958D PCI Wide Differential Ultra SCSI-3
> +======= === ==============================
>
> MultiMaster "C" Series Host Adapters:
>
> +======== ==== ==============================
> BT-946C PCI Fast SCSI-2
> BT-956C PCI Wide Fast SCSI-2
> BT-956CD PCI Wide Differential Fast SCSI-2
> @@ -232,9 +253,11 @@ BT-757C EISA Wide Fast SCSI-2
> BT-757CD EISA Wide Differential Fast SCSI-2
> BT-545C ISA Fast SCSI-2
> BT-540CF ISA Fast SCSI-2
> +======== ==== ==============================
>
> MultiMaster "S" Series Host Adapters:
>
> +======= ==== ==============================
> BT-445S VLB Fast SCSI-2
> BT-747S EISA Fast SCSI-2
> BT-747D EISA Differential Fast SCSI-2
> @@ -244,11 +267,14 @@ BT-545S ISA Fast SCSI-2
> BT-542D ISA Differential Fast SCSI-2
> BT-742A EISA SCSI-2 (742A revision H)
> BT-542B ISA SCSI-2 (542B revision H)
> +======= ==== ==============================
>
> MultiMaster "A" Series Host Adapters:
>
> +======= ==== ==============================
> BT-742A EISA SCSI-2 (742A revisions A - G)
> BT-542B ISA SCSI-2 (542B revisions A - G)
> +======= ==== ==============================
>
> AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
> supported by this driver.
> @@ -260,9 +286,11 @@ list. The retail kit includes the bare board and manual as well as cabling and
> driver media and documentation that are not provided with bare boards.
>
>
> - FLASHPOINT INSTALLATION NOTES
> +FlashPoint Installation Notes
> +=============================
>
> -o RAIDPlus Support
> +RAIDPlus Support
> +----------------
>
> FlashPoint Host Adapters now include RAIDPlus, Mylex's bootable software
> RAID. RAIDPlus is not supported on Linux, and there are no plans to support
> @@ -273,7 +301,8 @@ o RAIDPlus Support
> than RAIDPlus, so there is little impetus to include RAIDPlus support in the
> BusLogic driver.
>
> -o Enabling UltraSCSI Transfers
> +Enabling UltraSCSI Transfers
> +----------------------------
>
> FlashPoint Host Adapters ship with their configuration set to "Factory
> Default" settings that are conservative and do not allow for UltraSCSI speed
> @@ -287,12 +316,14 @@ o Enabling UltraSCSI Transfers
> the "Optimum Performance" settings are loaded.
>
>
> - BT-948/958/958D INSTALLATION NOTES
> +BT-948/958/958D Installation Notes
> +==================================
>
> The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
> require attention in some circumstances when installing Linux.
>
> -o PCI I/O Port Assignments
> +PCI I/O Port Assignments
> +------------------------
>
> When configured to factory default settings, the BT-948/958/958D will only
> recognize the PCI I/O port assignments made by the motherboard's PCI BIOS.
> @@ -312,7 +343,8 @@ o PCI I/O Port Assignments
> possible future I/O port conflicts. The older BT-946C/956C/956CD also have
> this configuration option, but the factory default setting is "Primary".
>
> -o PCI Slot Scanning Order
> +PCI Slot Scanning Order
> +-----------------------
>
> In systems with multiple BusLogic PCI Host Adapters, the order in which the
> PCI slots are scanned may appear reversed with the BT-948/958/958D as
> @@ -339,7 +371,8 @@ o PCI Slot Scanning Order
> so as to recognize the host adapters in the same order as they are enumerated
> by the host adapter's BIOS.
>
> -o Enabling UltraSCSI Transfers
> +Enabling UltraSCSI Transfers
> +----------------------------
>
> The BT-948/958/958D ship with their configuration set to "Factory Default"
> settings that are conservative and do not allow for UltraSCSI speed to be
> @@ -353,7 +386,8 @@ o Enabling UltraSCSI Transfers
> "Optimum Performance" settings are loaded.
>
>
> - DRIVER OPTIONS
> +Driver Options
> +==============
>
> BusLogic Driver Options may be specified either via the Linux Kernel Command
> Line or via the Loadable Kernel Module Installation Facility. Driver Options
> @@ -520,30 +554,34 @@ The following examples demonstrate setting the Queue Depth for Target Devices
> Devices on the second host adapter to 31, and the Bus Settle Time on the
> second host adapter to 30 seconds.
>
> -Linux Kernel Command Line:
> +Linux Kernel Command Line::
>
> linux BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30
>
> -LILO Linux Boot Loader (in /etc/lilo.conf):
> +LILO Linux Boot Loader (in /etc/lilo.conf)::
>
> append = "BusLogic=QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30"
>
> -INSMOD Loadable Kernel Module Installation Facility:
> +INSMOD Loadable Kernel Module Installation Facility::
>
> insmod BusLogic.o \
> 'BusLogic="QueueDepth:[,7,15];QueueDepth:31,BusSettleTime:30"'
>
> -NOTE: Module Utilities 2.1.71 or later is required for correct parsing
> +
> +.. Note::
> +
> + Module Utilities 2.1.71 or later is required for correct parsing
> of driver options containing commas.
>
>
> - DRIVER INSTALLATION
> +Driver Installation
> +===================
>
> This distribution was prepared for Linux kernel version 2.0.35, but should be
> compatible with 2.0.4 or any later 2.0 series kernel.
>
> To install the new BusLogic SCSI driver, you may use the following commands,
> -replacing "/usr/src" with wherever you keep your Linux kernel source tree:
> +replacing "/usr/src" with wherever you keep your Linux kernel source tree::
>
> cd /usr/src
> tar -xvzf BusLogic-2.0.15.tar.gz
> @@ -557,7 +595,8 @@ Then install "arch/x86/boot/zImage" as your standard kernel, run lilo if
> appropriate, and reboot.
>
>
> - BUSLOGIC ANNOUNCEMENTS MAILING LIST
> +BusLogic Announcements Mailing List
> +===================================
>
> The BusLogic Announcements Mailing List provides a forum for informing Linux
> users of new driver releases and other announcements regarding Linux support
> diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
> index d453fb3f1f7d..6bb2428c1d56 100644
> --- a/Documentation/scsi/index.rst
> +++ b/Documentation/scsi/index.rst
> @@ -15,5 +15,6 @@ Linux SCSI Subsystem
> aic7xxx
> bfa
> bnx2fc
> + BusLogic
>
> scsi_transport_srp/figures
> diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
> index 3170b295a5da..9b8be4f0da19 100644
> --- a/drivers/scsi/BusLogic.c
> +++ b/drivers/scsi/BusLogic.c
> @@ -3652,7 +3652,7 @@ static bool __init blogic_parse(char **str, char *keyword)
> selected host adapter.
>
> The BusLogic Driver Probing Options are described in
> - <file:Documentation/scsi/BusLogic.txt>.
> + <file:Documentation/scsi/BusLogic.rst>.
> */
>
> static int __init blogic_parseopts(char *options)
> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
> index 18af62594bc0..5ec7330f82b6 100644
> --- a/drivers/scsi/Kconfig
> +++ b/drivers/scsi/Kconfig
> @@ -502,7 +502,7 @@ config SCSI_BUSLOGIC
> This is support for BusLogic MultiMaster and FlashPoint SCSI Host
> Adapters. Consult the SCSI-HOWTO, available from
> <http://www.tldp.org/docs.html#howto>, and the files
> - <file:Documentation/scsi/BusLogic.txt> and
> + <file:Documentation/scsi/BusLogic.rst> and
> <file:Documentation/scsi/FlashPoint.txt> for more information.
> Note that support for FlashPoint is only available for 32-bit
> x86 configurations.
>

\
 
 \ /
  Last update: 2020-03-04 20:07    [W:0.659 / U:4.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site