lkml.org 
[lkml]   [2020]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch 1/1] media: ti-vpe: cal: fix disable_irqs to only the intended target
Tomi,

Thanks for the review.

Tomi Valkeinen <tomi.valkeinen@ti.com> wrote on Wed [2020-Mar-04 10:49:55 +0200]:
> On 02/03/2020 15:56, Benoit Parrot wrote:
> > disable_irqs() was mistakenly disabling all interrupts when called.
> > This cause all port stream to stop even if only stopping one of them.
> >
> > Cc: stable <stable@vger.kernel.org>
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> > drivers/media/platform/ti-vpe/cal.c | 16 ++++++++--------
> > 1 file changed, 8 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
> > index 6e009e479be3..6d4cbb8782ed 100644
> > --- a/drivers/media/platform/ti-vpe/cal.c
> > +++ b/drivers/media/platform/ti-vpe/cal.c
> > @@ -722,16 +722,16 @@ static void enable_irqs(struct cal_ctx *ctx)
> >
> > static void disable_irqs(struct cal_ctx *ctx)
> > {
> > + u32 val;
> > +
> > /* Disable IRQ_WDMA_END 0/1 */
> > - reg_write_field(ctx->dev,
> > - CAL_HL_IRQENABLE_CLR(2),
> > - CAL_HL_IRQ_CLEAR,
> > - CAL_HL_IRQ_MASK(ctx->csi2_port));
> > + val = 0;
> > + set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
> > + reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(2), val);
> > /* Disable IRQ_WDMA_START 0/1 */
> > - reg_write_field(ctx->dev,
> > - CAL_HL_IRQENABLE_CLR(3),
> > - CAL_HL_IRQ_CLEAR,
> > - CAL_HL_IRQ_MASK(ctx->csi2_port));
> > + val = 0;
> > + set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
> > + reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(3), val);
> > /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
> > reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
> > }
> >
>
> I think the above works. But the enable_irqs is broken too, even if it doesn't cause any issues. Both IRQ_SET and IRQ_CLR are not supposed to be "modified" by a read-mod-write operation, but just written to.
>

Well maybe not consistent now, that disable_irqs has been modified but not
broken per se.

> The macros used also make the code very difficult to read. Something like this fixes both irq enable and disable, and makes it readable:

Ah but the mask macro are all consistent with each other, whether that
create one too many level of abstraction is a different subject. This setup
was oroginally requested by the maintainer. So I'll "fix" enable_irqs also
but I'll keep the macro as is.

Benoit

>
> diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
> index c8b1290c9e2b..660653031a0b 100644
> --- a/drivers/media/platform/ti-vpe/cal.c
> +++ b/drivers/media/platform/ti-vpe/cal.c
> @@ -707,15 +707,9 @@ static void cal_quickdump_regs(struct cal_dev *dev)
> static void enable_irqs(struct cal_ctx *ctx)
> {
> /* Enable IRQ_WDMA_END 0/1 */
> - reg_write_field(ctx->dev,
> - CAL_HL_IRQENABLE_SET(2),
> - CAL_HL_IRQ_ENABLE,
> - CAL_HL_IRQ_MASK(ctx->csi2_port));
> + reg_write(ctx->dev, CAL_HL_IRQENABLE_SET(2), 1 << (ctx->csi2_port - 1));
> /* Enable IRQ_WDMA_START 0/1 */
> - reg_write_field(ctx->dev,
> - CAL_HL_IRQENABLE_SET(3),
> - CAL_HL_IRQ_ENABLE,
> - CAL_HL_IRQ_MASK(ctx->csi2_port));
> + reg_write(ctx->dev, CAL_HL_IRQENABLE_SET(3), 1 << (ctx->csi2_port - 1));
> /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
> reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0xFF000000);
> }
> @@ -723,15 +717,9 @@ static void enable_irqs(struct cal_ctx *ctx)
> static void disable_irqs(struct cal_ctx *ctx)
> {
> /* Disable IRQ_WDMA_END 0/1 */
> - reg_write_field(ctx->dev,
> - CAL_HL_IRQENABLE_CLR(2),
> - CAL_HL_IRQ_CLEAR,
> - CAL_HL_IRQ_MASK(ctx->csi2_port));
> + reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(2), 1 << (ctx->csi2_port - 1));
> /* Disable IRQ_WDMA_START 0/1 */
> - reg_write_field(ctx->dev,
> - CAL_HL_IRQENABLE_CLR(3),
> - CAL_HL_IRQ_CLEAR,
> - CAL_HL_IRQ_MASK(ctx->csi2_port));
> + reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(3), 1 << (ctx->csi2_port - 1));
> /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
> reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
> }
>
> Tomi
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-03-04 14:13    [W:0.165 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site