lkml.org 
[lkml]   [2020]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] dt: Remove booting-without-of.txt
From
Date
On Wed, 2020-03-04 at 12:45 -0600, Rob Herring wrote:
> Well, not quite removed yet... Mauro is looking at moving this to ReST,
> but I think it would be better to trim or remove it.
>
> boot-without-of.txt is an ancient document that first outlined
> Flattened DeviceTree. The DT world has evolved a lot in the 15 years
> since and boot-without-of.txt is pretty stale. The name of the document
> itself is confusing if you don't understand the evolution from real
> 'OpenFirmware'. Much of what booting-without-of.txt contains is now in
> the DT specification (which evolved out of the ePAPR).
>
> This is a first pass of removing everything that has a DT spec
> equivalent or is no longer standard practice (e.g. soc<SoCName> for SoC
> nodes) in order to see what's left. This is what I have:
>
> TODO
> - Move boot interface details to arch specific docs
> - Document 'serial-number' property in DT spec
> - Document the 'hotpluggable' memory property in DT spec
> - Document the 'sleep' property (PPC only)
> - Document the 'dma-coherent' property in DT spec
> - Need the history of node names and 'name' property?
> - Need how addresses work?
>
> Cc: Frank Rowand <frowand.list@gmail.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: linuxppc-dev@lists.ozlabs.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../devicetree/booting-without-of.txt | 1027 +----------------
> 1 file changed, 1 insertion(+), 1026 deletions(-)
>
> diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
> index 4660ccee35a3..97beee828ba4 100644
> --- a/Documentation/devicetree/booting-without-of.txt
> +++ b/Documentation/devicetree/booting-without-of.txt
> @@ -19,44 +19,17 @@ Table of Contents
> 5) Entry point for arch/sh
>
> II - The DT block format
> - 1) Header
> 2) Device tree generalities
> - 3) Device tree "structure" block
> - 4) Device tree "strings" block
>
> III - Required content of the device tree
> 1) Note about cells and address representation
> - 2) Note about "compatible" properties
> - 3) Note about "name" properties
> - 4) Note about node and property names and character set
> 5) Required nodes and properties
> a) The root node
> - b) The /cpus node
> - c) The /cpus/* nodes
> - d) the /memory node(s)
> - e) The /chosen node
> - f) the /soc<SOCname> node
> -
> - IV - "dtc", the device tree compiler
> -
> - V - Recommendations for a bootloader
> -
> - VI - System-on-a-chip devices and nodes
> - 1) Defining child nodes of an SOC
> - 2) Representing devices without a current OF specification
> -
> - VII - Specifying interrupt information for devices
> - 1) interrupts property
> - 2) interrupt-parent property
> - 3) OpenPIC Interrupt Controllers
> - 4) ISA Interrupt Controllers
>
> VIII - Specifying device power management information (sleep property)
>
> IX - Specifying dma bus information
>
> - Appendix A - Sample SOC node for MPC8540
> -
>
> Revision Information
> ====================
> @@ -105,19 +78,6 @@ Revision Information
> - Added chapter VI
>
>
> - ToDo:
> - - Add some definitions of interrupt tree (simple/complex)
> - - Add some definitions for PCI host bridges
> - - Add some common address format examples
> - - Add definitions for standard properties and "compatible"
> - names for cells that are not already defined by the existing
> - OF spec.
> - - Compare FSL SOC use of PCI to standard and make sure no new
> - node definition required.
> - - Add more information about node definitions for SOC devices
> - that currently have no standard, like the FSL CPM.
> -
> -
> I - Introduction
> ================
>
> @@ -333,196 +293,17 @@ II - The DT block format
> ========================
>
>
> -This chapter defines the actual format of the flattened device-tree
> -passed to the kernel. The actual content of it and kernel requirements
> -are described later. You can find example of code manipulating that
> -format in various places, including arch/powerpc/kernel/prom_init.c
> -which will generate a flattened device-tree from the Open Firmware
> -representation, or the fs2dt utility which is part of the kexec tools
> -which will generate one from a filesystem representation. It is
> -expected that a bootloader like uboot provides a bit more support,
> -that will be discussed later as well.
> -
> Note: The block has to be in main memory. It has to be accessible in
> both real mode and virtual mode with no mapping other than main
> memory. If you are writing a simple flash bootloader, it should copy
> the block to RAM before passing it to the kernel.
>
>
> -1) Header
> ----------
> -
> - The kernel is passed the physical address pointing to an area of memory
> - that is roughly described in include/linux/of_fdt.h by the structure
> - boot_param_header:
> -
> -struct boot_param_header {
> - u32 magic; /* magic word OF_DT_HEADER */
> - u32 totalsize; /* total size of DT block */
> - u32 off_dt_struct; /* offset to structure */
> - u32 off_dt_strings; /* offset to strings */
> - u32 off_mem_rsvmap; /* offset to memory reserve map
> - */
> - u32 version; /* format version */
> - u32 last_comp_version; /* last compatible version */
> -
> - /* version 2 fields below */
> - u32 boot_cpuid_phys; /* Which physical CPU id we're
> - booting on */
> - /* version 3 fields below */
> - u32 size_dt_strings; /* size of the strings block */
> -
> - /* version 17 fields below */
> - u32 size_dt_struct; /* size of the DT structure block */
> -};
> -
> - Along with the constants:
> -
> -/* Definitions used by the flattened device tree */
> -#define OF_DT_HEADER 0xd00dfeed /* 4: version,
> - 4: total size */
> -#define OF_DT_BEGIN_NODE 0x1 /* Start node: full name
> - */
> -#define OF_DT_END_NODE 0x2 /* End node */
> -#define OF_DT_PROP 0x3 /* Property: name off,
> - size, content */
> -#define OF_DT_END 0x9
> -
> - All values in this header are in big endian format, the various
> - fields in this header are defined more precisely below. All
> - "offset" values are in bytes from the start of the header; that is
> - from the physical base address of the device tree block.
> -
> - - magic
> -
> - This is a magic value that "marks" the beginning of the
> - device-tree block header. It contains the value 0xd00dfeed and is
> - defined by the constant OF_DT_HEADER
> -
> - - totalsize
> -
> - This is the total size of the DT block including the header. The
> - "DT" block should enclose all data structures defined in this
> - chapter (who are pointed to by offsets in this header). That is,
> - the device-tree structure, strings, and the memory reserve map.
> -
> - - off_dt_struct
> -
> - This is an offset from the beginning of the header to the start
> - of the "structure" part the device tree. (see 2) device tree)
> -
> - - off_dt_strings
> -
> - This is an offset from the beginning of the header to the start
> - of the "strings" part of the device-tree
> -
> - - off_mem_rsvmap
> -
> - This is an offset from the beginning of the header to the start
> - of the reserved memory map. This map is a list of pairs of 64-
> - bit integers. Each pair is a physical address and a size. The
> - list is terminated by an entry of size 0. This map provides the
> - kernel with a list of physical memory areas that are "reserved"
> - and thus not to be used for memory allocations, especially during
> - early initialization. The kernel needs to allocate memory during
> - boot for things like un-flattening the device-tree, allocating an
> - MMU hash table, etc... Those allocations must be done in such a
> - way to avoid overriding critical things like, on Open Firmware
> - capable machines, the RTAS instance, or on some pSeries, the TCE
> - tables used for the iommu. Typically, the reserve map should
> - contain _at least_ this DT block itself (header,total_size). If
> - you are passing an initrd to the kernel, you should reserve it as
> - well. You do not need to reserve the kernel image itself. The map
> - should be 64-bit aligned.
> -
> - - version
> -
> - This is the version of this structure. Version 1 stops
> - here. Version 2 adds an additional field boot_cpuid_phys.
> - Version 3 adds the size of the strings block, allowing the kernel
> - to reallocate it easily at boot and free up the unused flattened
> - structure after expansion. Version 16 introduces a new more
> - "compact" format for the tree itself that is however not backward
> - compatible. Version 17 adds an additional field, size_dt_struct,
> - allowing it to be reallocated or moved more easily (this is
> - particularly useful for bootloaders which need to make
> - adjustments to a device tree based on probed information). You
> - should always generate a structure of the highest version defined
> - at the time of your implementation. Currently that is version 17,
> - unless you explicitly aim at being backward compatible.
> -
> - - last_comp_version
> -
> - Last compatible version. This indicates down to what version of
> - the DT block you are backward compatible. For example, version 2
> - is backward compatible with version 1 (that is, a kernel build
> - for version 1 will be able to boot with a version 2 format). You
> - should put a 1 in this field if you generate a device tree of
> - version 1 to 3, or 16 if you generate a tree of version 16 or 17
> - using the new unit name format.
> -
> - - boot_cpuid_phys
> -
> - This field only exist on version 2 headers. It indicate which
> - physical CPU ID is calling the kernel entry point. This is used,
> - among others, by kexec. If you are on an SMP system, this value
> - should match the content of the "reg" property of the CPU node in
> - the device-tree corresponding to the CPU calling the kernel entry
> - point (see further chapters for more information on the required
> - device-tree contents)
> -
> - - size_dt_strings
> -
> - This field only exists on version 3 and later headers. It
> - gives the size of the "strings" section of the device tree (which
> - starts at the offset given by off_dt_strings).
> -
> - - size_dt_struct
> -
> - This field only exists on version 17 and later headers. It gives
> - the size of the "structure" section of the device tree (which
> - starts at the offset given by off_dt_struct).
> -
> - So the typical layout of a DT block (though the various parts don't
> - need to be in that order) looks like this (addresses go from top to
> - bottom):
> -
> -
> - ------------------------------
> - base -> | struct boot_param_header |
> - ------------------------------
> - | (alignment gap) (*) |
> - ------------------------------
> - | memory reserve map |
> - ------------------------------
> - | (alignment gap) |
> - ------------------------------
> - | |
> - | device-tree structure |
> - | |
> - ------------------------------
> - | (alignment gap) |
> - ------------------------------
> - | |
> - | device-tree strings |
> - | |
> - -----> ------------------------------
> - |
> - |
> - --- (base + totalsize)
> -
> - (*) The alignment gaps are not necessarily present; their presence
> - and size are dependent on the various alignment requirements of
> - the individual data blocks.
>
>
> 2) Device tree generalities
> ---------------------------
>
> -This device-tree itself is separated in two different blocks, a
> -structure block and a strings block. Both need to be aligned to a 4
> -byte boundary.
> -
> First, let's quickly describe the device-tree concept before detailing
> the storage format. This chapter does _not_ describe the detail of the
> required types of nodes & properties for the kernel, this is done
> @@ -574,128 +355,6 @@ is) is also required to have a "compatible" property indicating the
> specific hardware and an optional list of devices it is fully
> backwards compatible with.
>
> -Finally, every node that can be referenced from a property in another
> -node is required to have either a "phandle" or a "linux,phandle"
> -property. Real Open Firmware implementations provide a unique
> -"phandle" value for every node that the "prom_init()" trampoline code
> -turns into "linux,phandle" properties. However, this is made optional
> -if the flattened device tree is used directly. An example of a node
> -referencing another node via "phandle" is when laying out the
> -interrupt tree which will be described in a further version of this
> -document.
> -
> -The "phandle" property is a 32-bit value that uniquely
> -identifies a node. You are free to use whatever values or system of
> -values, internal pointers, or whatever to generate these, the only
> -requirement is that every node for which you provide that property has
> -a unique value for it.
> -
> -Here is an example of a simple device-tree. In this example, an "o"
> -designates a node followed by the node unit name. Properties are
> -presented with their name followed by their content. "content"
> -represents an ASCII string (zero terminated) value, while <content>
> -represents a 32-bit value, specified in decimal or hexadecimal (the
> -latter prefixed 0x). The various nodes in this example will be
> -discussed in a later chapter. At this point, it is only meant to give
> -you a idea of what a device-tree looks like. I have purposefully kept
> -the "name" and "linux,phandle" properties which aren't necessary in
> -order to give you a better idea of what the tree looks like in
> -practice.
> -
> - / o device-tree
> - |- name = "device-tree"
> - |- model = "MyBoardName"
> - |- compatible = "MyBoardFamilyName"
> - |- #address-cells = <2>
> - |- #size-cells = <2>
> - |- linux,phandle = <0>
> - |
> - o cpus
> - | | - name = "cpus"
> - | | - linux,phandle = <1>
> - | | - #address-cells = <1>
> - | | - #size-cells = <0>
> - | |
> - | o PowerPC,970@0
> - | |- name = "PowerPC,970"
> - | |- device_type = "cpu"
> - | |- reg = <0>
> - | |- clock-frequency = <0x5f5e1000>
> - | |- 64-bit
> - | |- linux,phandle = <2>
> - |
> - o memory@0
> - | |- name = "memory"
> - | |- device_type = "memory"
> - | |- reg = <0x00000000 0x00000000 0x00000000 0x20000000>
> - | |- linux,phandle = <3>
> - |
> - o chosen
> - |- name = "chosen"
> - |- bootargs = "root=/dev/sda2"
> - |- linux,phandle = <4>
> -
> -This tree is almost a minimal tree. It pretty much contains the
> -minimal set of required nodes and properties to boot a linux kernel;
> -that is, some basic model information at the root, the CPUs, and the
> -physical memory layout. It also includes misc information passed
> -through /chosen, like in this example, the platform type (mandatory)
> -and the kernel command line arguments (optional).
> -
> -The /cpus/PowerPC,970@0/64-bit property is an example of a
> -property without a value. All other properties have a value. The
> -significance of the #address-cells and #size-cells properties will be
> -explained in chapter IV which defines precisely the required nodes and
> -properties and their content.
> -
> -
> -3) Device tree "structure" block
> -
> -The structure of the device tree is a linearized tree structure. The
> -"OF_DT_BEGIN_NODE" token starts a new node, and the "OF_DT_END_NODE"
> -ends that node definition. Child nodes are simply defined before
> -"OF_DT_END_NODE" (that is nodes within the node). A 'token' is a 32
> -bit value. The tree has to be "finished" with a OF_DT_END token
> -
> -Here's the basic structure of a single node:
> -
> - * token OF_DT_BEGIN_NODE (that is 0x00000001)
> - * for version 1 to 3, this is the node full path as a zero
> - terminated string, starting with "/". For version 16 and later,
> - this is the node unit name only (or an empty string for the
> - root node)
> - * [align gap to next 4 bytes boundary]
> - * for each property:
> - * token OF_DT_PROP (that is 0x00000003)
> - * 32-bit value of property value size in bytes (or 0 if no
> - value)
> - * 32-bit value of offset in string block of property name
> - * property value data if any
> - * [align gap to next 4 bytes boundary]
> - * [child nodes if any]
> - * token OF_DT_END_NODE (that is 0x00000002)
> -
> -So the node content can be summarized as a start token, a full path,
> -a list of properties, a list of child nodes, and an end token. Every
> -child node is a full node structure itself as defined above.
> -
> -NOTE: The above definition requires that all property definitions for
> -a particular node MUST precede any subnode definitions for that node.
> -Although the structure would not be ambiguous if properties and
> -subnodes were intermingled, the kernel parser requires that the
> -properties come first (up until at least 2.6.22). Any tools
> -manipulating a flattened tree must take care to preserve this
> -constraint.
> -
> -4) Device tree "strings" block
> -
> -In order to save space, property names, which are generally redundant,
> -are stored separately in the "strings" block. This block is simply the
> -whole bunch of zero terminated strings for all property names
> -concatenated together. The device-tree property definitions in the
> -structure block will contain offset values from the beginning of the
> -strings block.
> -
>
> III - Required content of the device tree
> =========================================
> @@ -792,568 +451,14 @@ registers are visible on the parent bus using an identity mapping
> translation. In other words, the parent bus address space is the same
> as the child bus address space.
>
> -2) Note about "compatible" properties
> --------------------------------------
> -
> -These properties are optional, but recommended in devices and the root
> -node. The format of a "compatible" property is a list of concatenated
> -zero terminated strings. They allow a device to express its
> -compatibility with a family of similar devices, in some cases,
> -allowing a single driver to match against several devices regardless
> -of their actual names.
> -
> -3) Note about "name" properties
> --------------------------------
> -
> -While earlier users of Open Firmware like OldWorld macintoshes tended
> -to use the actual device name for the "name" property, it's nowadays
> -considered a good practice to use a name that is closer to the device
> -class (often equal to device_type). For example, nowadays, Ethernet
> -controllers are named "ethernet", an additional "model" property
> -defining precisely the chip type/model, and "compatible" property
> -defining the family in case a single driver can driver more than one
> -of these chips. However, the kernel doesn't generally put any
> -restriction on the "name" property; it is simply considered good
> -practice to follow the standard and its evolutions as closely as
> -possible.
> -
> -Note also that the new format version 16 makes the "name" property
> -optional. If it's absent for a node, then the node's unit name is then
> -used to reconstruct the name. That is, the part of the unit name
> -before the "@" sign is used (or the entire unit name if no "@" sign
> -is present).
> -
> -4) Note about node and property names and character set
> --------------------------------------------------------
> -
> -While Open Firmware provides more flexible usage of 8859-1, this
> -specification enforces more strict rules. Nodes and properties should
> -be comprised only of ASCII characters 'a' to 'z', '0' to
> -'9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally
> -allow uppercase characters 'A' to 'Z' (property names should be
> -lowercase. The fact that vendors like Apple don't respect this rule is
> -irrelevant here). Additionally, node and property names should always
> -begin with a character in the range 'a' to 'z' (or 'A' to 'Z' for node
> -names).
> -
> -The maximum number of characters for both nodes and property names
> -is 31. In the case of node names, this is only the leftmost part of
> -a unit name (the pure "name" property), it doesn't include the unit
> -address which can extend beyond that limit.
> -
>
> 5) Required nodes and properties
> --------------------------------
> - These are all that are currently required. However, it is strongly
> - recommended that you expose PCI host bridges as documented in the
> - PCI binding to Open Firmware, and your interrupt tree as documented
> - in OF interrupt tree specification.
> -
> - a) The root node
> -
> - The root node requires some properties to be present:
> -
> - - model : this is your board name/model
> - - #address-cells : address representation for "root" devices
> - - #size-cells: the size representation for "root" devices
> - - compatible : the board "family" generally finds its way here,
> - for example, if you have 2 board models with a similar layout,
> - that typically get driven by the same platform code in the
> - kernel, you would specify the exact board model in the
> - compatible property followed by an entry that represents the SoC
> - model.
> -
> - The root node is also generally where you add additional properties
> - specific to your board like the serial number if any, that sort of
> - thing. It is recommended that if you add any "custom" property whose
> - name may clash with standard defined ones, you prefix them with your
> - vendor name and a comma.
>
> Additional properties for the root node:
>
> - serial-number : a string representing the device's serial number
>
> - b) The /cpus node
> -
> - This node is the parent of all individual CPU nodes. It doesn't
> - have any specific requirements, though it's generally good practice
> - to have at least:
> -
> - #address-cells = <00000001>
> - #size-cells = <00000000>
> -
> - This defines that the "address" for a CPU is a single cell, and has
> - no meaningful size. This is not necessary but the kernel will assume
> - that format when reading the "reg" properties of a CPU node, see
> - below
> -
> - c) The /cpus/* nodes
> -
> - So under /cpus, you are supposed to create a node for every CPU on
> - the machine. There is no specific restriction on the name of the
> - CPU, though it's common to call it <architecture>,<core>. For
> - example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX.
> - However, the Generic Names convention suggests that it would be
> - better to simply use 'cpu' for each cpu node and use the compatible
> - property to identify the specific cpu core.
> -
> - Required properties:
> -
> - - device_type : has to be "cpu"
> - - reg : This is the physical CPU number, it's a single 32-bit cell
> - and is also used as-is as the unit number for constructing the
> - unit name in the full path. For example, with 2 CPUs, you would
> - have the full path:
> - /cpus/PowerPC,970FX@0
> - /cpus/PowerPC,970FX@1
> - (unit addresses do not require leading zeroes)
> - - d-cache-block-size : one cell, L1 data cache block size in bytes (*)
> - - i-cache-block-size : one cell, L1 instruction cache block size in
> - bytes
> - - d-cache-size : one cell, size of L1 data cache in bytes
> - - i-cache-size : one cell, size of L1 instruction cache in bytes
> -
> -(*) The cache "block" size is the size on which the cache management
> -instructions operate. Historically, this document used the cache
> -"line" size here which is incorrect. The kernel will prefer the cache
> -block size and will fallback to cache line size for backward
> -compatibility.
> -
> - Recommended properties:
> -
> - - timebase-frequency : a cell indicating the frequency of the
> - timebase in Hz. This is not directly used by the generic code,
> - but you are welcome to copy/paste the pSeries code for setting
> - the kernel timebase/decrementer calibration based on this
> - value.
> - - clock-frequency : a cell indicating the CPU core clock frequency
> - in Hz. A new property will be defined for 64-bit values, but if
> - your frequency is < 4Ghz, one cell is enough. Here as well as
> - for the above, the common code doesn't use that property, but
> - you are welcome to re-use the pSeries or Maple one. A future
> - kernel version might provide a common function for this.
> - - d-cache-line-size : one cell, L1 data cache line size in bytes
> - if different from the block size
> - - i-cache-line-size : one cell, L1 instruction cache line size in
> - bytes if different from the block size
> -
> - You are welcome to add any property you find relevant to your board,
> - like some information about the mechanism used to soft-reset the
> - CPUs. For example, Apple puts the GPIO number for CPU soft reset
> - lines in there as a "soft-reset" property since they start secondary
> - CPUs by soft-resetting them.
> -
> -
> - d) the /memory node(s)
> -
> - To define the physical memory layout of your board, you should
> - create one or more memory node(s). You can either create a single
> - node with all memory ranges in its reg property, or you can create
> - several nodes, as you wish. The unit address (@ part) used for the
> - full path is the address of the first range of memory defined by a
> - given node. If you use a single memory node, this will typically be
> - @0.
> -
> - Required properties:
> -
> - - device_type : has to be "memory"
> - - reg : This property contains all the physical memory ranges of
> - your board. It's a list of addresses/sizes concatenated
> - together, with the number of cells of each defined by the
> - #address-cells and #size-cells of the root node. For example,
> - with both of these properties being 2 like in the example given
> - earlier, a 970 based machine with 6Gb of RAM could typically
> - have a "reg" property here that looks like:
> -
> - 00000000 00000000 00000000 80000000
> - 00000001 00000000 00000001 00000000
> -
> - That is a range starting at 0 of 0x80000000 bytes and a range
> - starting at 0x100000000 and of 0x100000000 bytes. You can see
> - that there is no memory covering the IO hole between 2Gb and
> - 4Gb. Some vendors prefer splitting those ranges into smaller
> - segments, but the kernel doesn't care.
> -
> - Additional properties:
> -
> - - hotpluggable : The presence of this property provides an explicit
> - hint to the operating system that this memory may potentially be
> - removed later. The kernel can take this into consideration when
> - doing nonmovable allocations and when laying out memory zones.
> -
> - e) The /chosen node
> -
> - This node is a bit "special". Normally, that's where Open Firmware
> - puts some variable environment information, like the arguments, or
> - the default input/output devices.
> -
> - This specification makes a few of these mandatory, but also defines
> - some linux-specific properties that would be normally constructed by
> - the prom_init() trampoline when booting with an OF client interface,
> - but that you have to provide yourself when using the flattened format.
> -
> - Recommended properties:
> -
> - - bootargs : This zero-terminated string is passed as the kernel
> - command line
> - - linux,stdout-path : This is the full path to your standard
> - console device if any. Typically, if you have serial devices on
> - your board, you may want to put the full path to the one set as
> - the default console in the firmware here, for the kernel to pick
> - it up as its own default console.
> -
> - Note that u-boot creates and fills in the chosen node for platforms
> - that use it.
> -
> - (Note: a practice that is now obsolete was to include a property
> - under /chosen called interrupt-controller which had a phandle value
> - that pointed to the main interrupt controller)
> -
> - f) the /soc<SOCname> node
> -
> - This node is used to represent a system-on-a-chip (SoC) and must be
> - present if the processor is a SoC. The top-level soc node contains
> - information that is global to all devices on the SoC. The node name
> - should contain a unit address for the SoC, which is the base address
> - of the memory-mapped register set for the SoC. The name of an SoC
> - node should start with "soc", and the remainder of the name should
> - represent the part number for the soc. For example, the MPC8540's
> - soc node would be called "soc8540".
> -
> - Required properties:
> -
> - - ranges : Should be defined as specified in 1) to describe the
> - translation of SoC addresses for memory mapped SoC registers.
> - - bus-frequency: Contains the bus frequency for the SoC node.
> - Typically, the value of this field is filled in by the boot
> - loader.
> - - compatible : Exact model of the SoC
> -
> -
> - Recommended properties:
> -
> - - reg : This property defines the address and size of the
> - memory-mapped registers that are used for the SOC node itself.
> - It does not include the child device registers - these will be
> - defined inside each child node. The address specified in the
> - "reg" property should match the unit address of the SOC node.
> - - #address-cells : Address representation for "soc" devices. The
> - format of this field may vary depending on whether or not the
> - device registers are memory mapped. For memory mapped
> - registers, this field represents the number of cells needed to
> - represent the address of the registers. For SOCs that do not
> - use MMIO, a special address format should be defined that
> - contains enough cells to represent the required information.
> - See 1) above for more details on defining #address-cells.
> - - #size-cells : Size representation for "soc" devices
> - - #interrupt-cells : Defines the width of cells used to represent
> - interrupts. Typically this value is <2>, which includes a
> - 32-bit number that represents the interrupt number, and a
> - 32-bit number that represents the interrupt sense and level.
> - This field is only needed if the SOC contains an interrupt
> - controller.
> -
> - The SOC node may contain child nodes for each SOC device that the
> - platform uses. Nodes should not be created for devices which exist
> - on the SOC but are not used by a particular platform. See chapter VI
> - for more information on how to specify devices that are part of a SOC.
> -
> - Example SOC node for the MPC8540:
> -
> - soc8540@e0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - #interrupt-cells = <2>;
> - device_type = "soc";
> - ranges = <0x00000000 0xe0000000 0x00100000>
> - reg = <0xe0000000 0x00003000>;
> - bus-frequency = <0>;
> - }
> -
> -
> -
> -IV - "dtc", the device tree compiler
> -====================================
> -
> -
> -dtc source code can be found at
> -<http://git.jdl.com/gitweb/?p=dtc.git>
> -
> -WARNING: This version is still in early development stage; the
> -resulting device-tree "blobs" have not yet been validated with the
> -kernel. The current generated block lacks a useful reserve map (it will
> -be fixed to generate an empty one, it's up to the bootloader to fill
> -it up) among others. The error handling needs work, bugs are lurking,
> -etc...
> -
> -dtc basically takes a device-tree in a given format and outputs a
> -device-tree in another format. The currently supported formats are:
> -
> - Input formats:
> - -------------
> -
> - - "dtb": "blob" format, that is a flattened device-tree block
> - with
> - header all in a binary blob.
> - - "dts": "source" format. This is a text file containing a
> - "source" for a device-tree. The format is defined later in this
> - chapter.
> - - "fs" format. This is a representation equivalent to the
> - output of /proc/device-tree, that is nodes are directories and
> - properties are files
> -
> - Output formats:
> - ---------------
> -
> - - "dtb": "blob" format
> - - "dts": "source" format
> - - "asm": assembly language file. This is a file that can be
> - sourced by gas to generate a device-tree "blob". That file can
> - then simply be added to your Makefile. Additionally, the
> - assembly file exports some symbols that can be used.
> -
> -
> -The syntax of the dtc tool is
> -
> - dtc [-I <input-format>] [-O <output-format>]
> - [-o output-filename] [-V output_version] input_filename
> -
> -
> -The "output_version" defines what version of the "blob" format will be
> -generated. Supported versions are 1,2,3 and 16. The default is
> -currently version 3 but that may change in the future to version 16.
> -
> -Additionally, dtc performs various sanity checks on the tree, like the
> -uniqueness of linux, phandle properties, validity of strings, etc...
> -
> -The format of the .dts "source" file is "C" like, supports C and C++
> -style comments.
> -
> -/ {
> -}
> -
> -The above is the "device-tree" definition. It's the only statement
> -supported currently at the toplevel.
> -
> -/ {
> - property1 = "string_value"; /* define a property containing a 0
> - * terminated string
> - */
> -
> - property2 = <0x1234abcd>; /* define a property containing a
> - * numerical 32-bit value (hexadecimal)
> - */
> -
> - property3 = <0x12345678 0x12345678 0xdeadbeef>;
> - /* define a property containing 3
> - * numerical 32-bit values (cells) in
> - * hexadecimal
> - */
> - property4 = [0x0a 0x0b 0x0c 0x0d 0xde 0xea 0xad 0xbe 0xef];
> - /* define a property whose content is
> - * an arbitrary array of bytes
> - */
> -
> - childnode@address { /* define a child node named "childnode"
> - * whose unit name is "childnode at
> - * address"
> - */
> -
> - childprop = "hello\n"; /* define a property "childprop" of
> - * childnode (in this case, a string)
> - */
> - };
> -};
> -
> -Nodes can contain other nodes etc... thus defining the hierarchical
> -structure of the tree.
> -
> -Strings support common escape sequences from C: "\n", "\t", "\r",
> -"\(octal value)", "\x(hex value)".
> -
> -It is also suggested that you pipe your source file through cpp (gcc
> -preprocessor) so you can use #include's, #define for constants, etc...
> -
> -Finally, various options are planned but not yet implemented, like
> -automatic generation of phandles, labels (exported to the asm file so
> -you can point to a property content and change it easily from whatever
> -you link the device-tree with), label or path instead of numeric value
> -in some cells to "point" to a node (replaced by a phandle at compile
> -time), export of reserve map address to the asm file, ability to
> -specify reserve map content at compile time, etc...
> -
> -We may provide a .h include file with common definitions of that
> -proves useful for some properties (like building PCI properties or
> -interrupt maps) though it may be better to add a notion of struct
> -definitions to the compiler...
> -
> -
> -V - Recommendations for a bootloader
> -====================================
> -
> -
> -Here are some various ideas/recommendations that have been proposed
> -while all this has been defined and implemented.
> -
> - - The bootloader may want to be able to use the device-tree itself
> - and may want to manipulate it (to add/edit some properties,
> - like physical memory size or kernel arguments). At this point, 2
> - choices can be made. Either the bootloader works directly on the
> - flattened format, or the bootloader has its own internal tree
> - representation with pointers (similar to the kernel one) and
> - re-flattens the tree when booting the kernel. The former is a bit
> - more difficult to edit/modify, the later requires probably a bit
> - more code to handle the tree structure. Note that the structure
> - format has been designed so it's relatively easy to "insert"
> - properties or nodes or delete them by just memmoving things
> - around. It contains no internal offsets or pointers for this
> - purpose.
> -
> - - An example of code for iterating nodes & retrieving properties
> - directly from the flattened tree format can be found in the kernel
> - file drivers/of/fdt.c. Look at the of_scan_flat_dt() function,
> - its usage in early_init_devtree(), and the corresponding various
> - early_init_dt_scan_*() callbacks. That code can be re-used in a
> - GPL bootloader, and as the author of that code, I would be happy
> - to discuss possible free licensing to any vendor who wishes to
> - integrate all or part of this code into a non-GPL bootloader.
> - (reference needed; who is 'I' here? ---gcl Jan 31, 2011)
> -
> -
> -
> -VI - System-on-a-chip devices and nodes
> -=======================================
> -
> -Many companies are now starting to develop system-on-a-chip
> -processors, where the processor core (CPU) and many peripheral devices
> -exist on a single piece of silicon. For these SOCs, an SOC node
> -should be used that defines child nodes for the devices that make
> -up the SOC. While platforms are not required to use this model in
> -order to boot the kernel, it is highly encouraged that all SOC
> -implementations define as complete a flat-device-tree as possible to
> -describe the devices on the SOC. This will allow for the
> -genericization of much of the kernel code.
> -
> -
> -1) Defining child nodes of an SOC
> ----------------------------------
> -
> -Each device that is part of an SOC may have its own node entry inside
> -the SOC node. For each device that is included in the SOC, the unit
> -address property represents the address offset for this device's
> -memory-mapped registers in the parent's address space. The parent's
> -address space is defined by the "ranges" property in the top-level soc
> -node. The "reg" property for each node that exists directly under the
> -SOC node should contain the address mapping from the child address space
> -to the parent SOC address space and the size of the device's
> -memory-mapped register file.
> -
> -For many devices that may exist inside an SOC, there are predefined
> -specifications for the format of the device tree node. All SOC child
> -nodes should follow these specifications, except where noted in this
> -document.
> -
> -See appendix A for an example partial SOC node definition for the
> -MPC8540.
> -
> -
> -2) Representing devices without a current OF specification
> -----------------------------------------------------------
> -
> -Currently, there are many devices on SoCs that do not have a standard
> -representation defined as part of the Open Firmware specifications,
> -mainly because the boards that contain these SoCs are not currently
> -booted using Open Firmware. Binding documentation for new devices
> -should be added to the Documentation/devicetree/bindings directory.
> -That directory will expand as device tree support is added to more and
> -more SoCs.
> -
> -
> -VII - Specifying interrupt information for devices
> -===================================================
> -
> -The device tree represents the buses and devices of a hardware
> -system in a form similar to the physical bus topology of the
> -hardware.
> -
> -In addition, a logical 'interrupt tree' exists which represents the
> -hierarchy and routing of interrupts in the hardware.
> -
> -The interrupt tree model is fully described in the
> -document "Open Firmware Recommended Practice: Interrupt
> -Mapping Version 0.9". The document is available at:
> -<http://www.devicetree.org/open-firmware/practice/>
> -
> -1) interrupts property
> -----------------------
> -
> -Devices that generate interrupts to a single interrupt controller
> -should use the conventional OF representation described in the
> -OF interrupt mapping documentation.
> -
> -Each device which generates interrupts must have an 'interrupt'
> -property. The interrupt property value is an arbitrary number of
> -of 'interrupt specifier' values which describe the interrupt or
> -interrupts for the device.
> -
> -The encoding of an interrupt specifier is determined by the
> -interrupt domain in which the device is located in the
> -interrupt tree. The root of an interrupt domain specifies in
> -its #interrupt-cells property the number of 32-bit cells
> -required to encode an interrupt specifier. See the OF interrupt
> -mapping documentation for a detailed description of domains.
> -
> -For example, the binding for the OpenPIC interrupt controller
> -specifies an #interrupt-cells value of 2 to encode the interrupt
> -number and level/sense information. All interrupt children in an
> -OpenPIC interrupt domain use 2 cells per interrupt in their interrupts
> -property.
> -
> -The PCI bus binding specifies a #interrupt-cells value of 1 to encode
> -which interrupt pin (INTA,INTB,INTC,INTD) is used.
> -
> -2) interrupt-parent property
> -----------------------------
> -
> -The interrupt-parent property is specified to define an explicit
> -link between a device node and its interrupt parent in
> -the interrupt tree. The value of interrupt-parent is the
> -phandle of the parent node.
> -
> -If the interrupt-parent property is not defined for a node, its
> -interrupt parent is assumed to be an ancestor in the node's
> -_device tree_ hierarchy.
> -
> -3) OpenPIC Interrupt Controllers
> ---------------------------------
> -
> -OpenPIC interrupt controllers require 2 cells to encode
> -interrupt information. The first cell defines the interrupt
> -number. The second cell defines the sense and level
> -information.
> -
> -Sense and level information should be encoded as follows:
> -
> - 0 = low to high edge sensitive type enabled
> - 1 = active low level sensitive type enabled
> - 2 = active high level sensitive type enabled
> - 3 = high to low edge sensitive type enabled
> -
> -4) ISA Interrupt Controllers
> -----------------------------
> -
> -ISA PIC interrupt controllers require 2 cells to encode
> -interrupt information. The first cell defines the interrupt
> -number. The second cell defines the sense and level
> -information.
> -
> -ISA PIC interrupt controllers should adhere to the ISA PIC
> -encodings listed below:
> -
> - 0 = active low level sensitive type enabled
> - 1 = active high level sensitive type enabled
> - 2 = high to low edge sensitive type enabled
> - 3 = low to high edge sensitive type enabled
>
> VIII - Specifying Device Power Management Information (sleep property)
> ===================================================================
> @@ -1386,6 +491,7 @@ reasonably grouped in this manner, then create a virtual sleep controller
> (similar to an interrupt nexus, except that defining a standardized
> sleep-map should wait until its necessity is demonstrated).
>
> +
> IX - Specifying dma bus information
>
> Some devices may have DMA memory range shifted relatively to the beginning of
> @@ -1420,134 +526,3 @@ Optional property:
> - dma-ranges: <empty> value. if present - It means that DMA addresses
> translation has to be enabled for this device.
> - dma-coherent: Present if dma operations are coherent
> -
> -Example:
> -soc {
> - compatible = "ti,keystone","simple-bus";
> - ranges = <0x0 0x0 0x0 0xc0000000>;
> - dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
> -
> - [...]
> -
> - usb: usb@2680000 {
> - compatible = "ti,keystone-dwc3";
> -
> - [...]
> - dma-coherent;
> - };
> -};
> -
> -Appendix A - Sample SOC node for MPC8540
> -========================================
> -
> - soc@e0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc8540-ccsr", "simple-bus";
> - device_type = "soc";
> - ranges = <0x00000000 0xe0000000 0x00100000>
> - bus-frequency = <0>;
> - interrupt-parent = <&pic>;
> -
> - ethernet@24000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - device_type = "network";
> - model = "TSEC";
> - compatible = "gianfar", "simple-bus";
> - reg = <0x24000 0x1000>;
> - local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x00 ];
> - interrupts = <0x29 2 0x30 2 0x34 2>;
> - phy-handle = <&phy0>;
> - sleep = <&pmc 0x00000080>;
> - ranges;
> -
> - mdio@24520 {
> - reg = <0x24520 0x20>;
> - compatible = "fsl,gianfar-mdio";
> -
> - phy0: ethernet-phy@0 {
> - interrupts = <5 1>;
> - reg = <0>;
> - };
> -
> - phy1: ethernet-phy@1 {
> - interrupts = <5 1>;
> - reg = <1>;
> - };
> -
> - phy3: ethernet-phy@3 {
> - interrupts = <7 1>;
> - reg = <3>;
> - };
> - };
> - };
> -
> - ethernet@25000 {
> - device_type = "network";
> - model = "TSEC";
> - compatible = "gianfar";
> - reg = <0x25000 0x1000>;
> - local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x01 ];
> - interrupts = <0x13 2 0x14 2 0x18 2>;
> - phy-handle = <&phy1>;
> - sleep = <&pmc 0x00000040>;
> - };
> -
> - ethernet@26000 {
> - device_type = "network";
> - model = "FEC";
> - compatible = "gianfar";
> - reg = <0x26000 0x1000>;
> - local-mac-address = [ 0x00 0xE0 0x0C 0x00 0x73 0x02 ];
> - interrupts = <0x41 2>;
> - phy-handle = <&phy3>;
> - sleep = <&pmc 0x00000020>;
> - };
> -
> - serial@4500 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc8540-duart", "simple-bus";
> - sleep = <&pmc 0x00000002>;
> - ranges;
> -
> - serial@4500 {
> - device_type = "serial";
> - compatible = "ns16550";
> - reg = <0x4500 0x100>;
> - clock-frequency = <0>;
> - interrupts = <0x42 2>;
> - };
> -
> - serial@4600 {
> - device_type = "serial";
> - compatible = "ns16550";
> - reg = <0x4600 0x100>;
> - clock-frequency = <0>;
> - interrupts = <0x42 2>;
> - };
> - };
> -
> - pic: pic@40000 {
> - interrupt-controller;
> - #address-cells = <0>;
> - #interrupt-cells = <2>;
> - reg = <0x40000 0x40000>;
> - compatible = "chrp,open-pic";
> - device_type = "open-pic";
> - };
> -
> - i2c@3000 {
> - interrupts = <0x43 2>;
> - reg = <0x3000 0x100>;
> - compatible = "fsl-i2c";
> - dfsrr;
> - sleep = <&pmc 0x00000004>;
> - };
> -
> - pmc: power@e0070 {
> - compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc";
> - reg = <0xe0070 0x20>;
> - };
> - };

\
 
 \ /
  Last update: 2020-03-04 23:49    [W:0.728 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site