lkml.org 
[lkml]   [2020]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: qcom: Disable i2c device on gsbi4 for ipq806x
Date
Disable the i2c device on gsbi4, mark gsbi4_h as unused and gsbi4_qup
and src clks as protected. gsbi4_h can't be set to protected as it's
used by both gsbi and rpm and making it protected creates some problem
with gsbi4 uart function.
Without this fix, clock framework will turn them off at end
of probe. On ipq806x by design gsbi4_qup, gsbi4_h clks and i2c on gsbi4
are meant for RPM usage. So turning them off in kernel is incorrect.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 9 ---------
arch/arm/boot/dts/qcom-ipq8064.dtsi | 3 +++
drivers/clk/qcom/gcc-ipq806x.c | 1 +
3 files changed, 4 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 554c65e7aa0e..580aec63030d 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -21,14 +21,5 @@ mux {
};
};
};
-
- gsbi@16300000 {
- i2c@16380000 {
- status = "ok";
- clock-frequency = <200000>;
- pinctrl-0 = <&i2c4_pins>;
- pinctrl-names = "default";
- };
- };
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 16c0da97932c..d9a803c8a59b 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -421,6 +421,9 @@ qcom,ssbi@500000 {
gcc: clock-controller@900000 {
compatible = "qcom,gcc-ipq8064";
reg = <0x00900000 0x4000>;
+
+ protected-clocks = <GSBI4_QUP_SRC>, <GSBI4_QUP_CLK>;
+
#clock-cells = <1>;
#reset-cells = <1>;
};
diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index b0eee0903807..f7d7a2bc84c1 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -991,6 +991,7 @@ static struct clk_branch gsbi4_h_clk = {
.hw.init = &(struct clk_init_data){
.name = "gsbi4_h_clk",
.ops = &clk_branch_ops,
+ .flags = CLK_IGNORE_UNUSED,
},
},
};
--
2.25.1
\
 
 \ /
  Last update: 2020-03-30 22:58    [W:0.055 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site