lkml.org 
[lkml]   [2020]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next v6 00/11] net: ethernet: ti: add networking support for k3 am65x/j721e soc
From
Date
Hi

On 30/03/2020 11:28, Sekhar Nori wrote:
> On 30/03/20 1:06 PM, Sekhar Nori wrote:
>> On 30/03/20 12:45 PM, Tero Kristo wrote:
>>> On 28/03/2020 03:53, Vladimir Oltean wrote:
>>>> Hi David,
>>>>
>>>> On Fri, 27 Mar 2020 at 05:02, David Miller <davem@davemloft.net> wrote:
>>>>>
>>>>> From: Grygorii Strashko <grygorii.strashko@ti.com>
>>>>> Date: Tue, 24 Mar 2020 00:52:43 +0200
>>>>>
>>>>>> This v6 series adds basic networking support support TI K3
>>>>>> AM654x/J721E SoC which
>>>>>> have integrated Gigabit Ethernet MAC (Media Access Controller) into
>>>>>> device MCU
>>>>>> domain and named MCU_CPSW0 (CPSW2G NUSS).
>>>>>   ...
>>>>>
>>>>> Series applied, thank you.
>>>>
>>>> The build is now broken on net-next:
>>>>
>>>> arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi:303.23-309.6: ERROR
>>>> (phandle_references):
>>>> /interconnect@100000/interconnect@28380000/ethernet@46000000/ethernet-ports/port@1:
>>>>
>>>> Reference to non-existent node
>>>> or label "mcu_conf"
>>>>
>>>>    also defined at
>>>> arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts:471.13-474.3
>>>> arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi:303.23-309.6: ERROR
>>>> (phandle_references):
>>>> /interconnect@100000/interconnect@28380000/ethernet@46000000/ethernet-ports/port@1:
>>>>
>>>> Reference to non-existent node
>>>> or label "phy_gmii_sel"
>>>>
>>>>    also defined at
>>>> arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts:471.13-474.3
>>>>
>>>> As Grygorii said:
>>>>
>>>> Patches 1-6 are intended for netdev, Patches 7-11 are intended for K3
>>>> Platform
>>>> tree and provided here for testing purposes.
>>>
>>> Yeah, I think you are missing a dependency that was applied via the K3
>>> branch earlier. They are in linux-next now, but I am not so sure how
>>> much that is going to help you.
>>>
>>> You could just drop the DT patches from this merge and let me apply them
>>> via the platform branch.
>>
>> One other option would be that Dave merges your K3 tag which was sent to
>> ARM SoC to net-next. Its based on v5.6-rc1, has no other dependencies,
>> is already in linux-next, should be immutable and safe to merge. This
>> has the advantage that no rebase is necessary on net-next.
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux
>> tags/ti-k3-soc-for-v5.7
>
> FWIW, I was able to reproduce the build failure reported by Vladimir on
> net-next, merge Tero's tag (above) cleanly into it, and see that ARM64
> defconfig build on net-next succeeds after the merge.

Thank you Sekhar for checking this.

I'm very sorry for introducing this issue. I've tried hard to avoid such issue,
but still missed it (probably I have had to drop DT patches from last submission
and send them separately).

Sorry again.

--
Best regards,
grygorii

\
 
 \ /
  Last update: 2020-03-30 20:14    [W:0.087 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site