lkml.org 
[lkml]   [2020]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/3] kernel/sysctl: support setting sysctl parameters from kernel command line
On Mon, Mar 30, 2020 at 01:55:33PM +0200, Vlastimil Babka wrote:
> A recently proposed patch to add vm_swappiness command line parameter in
> addition to existing sysctl [1] made me wonder why we don't have a general
> support for passing sysctl parameters via command line. Googling found only
> somebody else wondering the same [2], but I haven't found any prior discussion
> with reasons why not to do this.
>
> Settings the vm_swappiness issue aside (the underlying issue might be solved in
> a different way), quick search of kernel-parameters.txt shows there are already
> some that exist as both sysctl and kernel parameter - hung_task_panic,
> nmi_watchdog, numa_zonelist_order, traceoff_on_warning. A general mechanism
> would remove the need to add more of those one-offs and might be handy in
> situations where configuration by e.g. /etc/sysctl.d/ is impractical.
>
> Hence, this patch adds a new parse_args() pass that looks for parameters
> prefixed by 'sysctl.' and tries to interpret them as writes to the
> corresponding sys/ files using an temporary in-kernel procfs mount. This
> mechanism was suggested by Eric W. Biederman [3], as it handles all dynamically
> registered sysctl tables. Errors due to e.g. invalid parameter name or value
> are reported in the kernel log.
>
> The processing is hooked right before the init process is loaded, as some
> handlers might be more complicated than simple setters and might need some
> subsystems to be initialized. At the moment the init process can be started and
> eventually execute a process writing to /proc/sys/ then it should be also fine
> to do that from the kernel.
>
> Sysctls registered later on module load time are not set by this mechanism -
> it's expected that in such scenarios, setting sysctl values from userspace is
> practical enough.
>
> [1] https://lore.kernel.org/r/BL0PR02MB560167492CA4094C91589930E9FC0@BL0PR02MB5601.namprd02.prod.outlook.com/
> [2] https://unix.stackexchange.com/questions/558802/how-to-set-sysctl-using-kernel-command-line-parameter
> [3] https://lore.kernel.org/r/87bloj2skm.fsf@x220.int.ebiederm.org/
>
> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
> ---
> .../admin-guide/kernel-parameters.txt | 9 ++
> fs/proc/proc_sysctl.c | 100 ++++++++++++++++++
> include/linux/sysctl.h | 4 +
> init/main.c | 2 +
> 4 files changed, 115 insertions(+)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index c07815d230bc..81ff626fc700 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -4793,6 +4793,15 @@
>
> switches= [HW,M68k]
>
> + sysctl.*= [KNL]
> + Set a sysctl parameter, right before loading the init
> + process, as if the value was written to the respective
> + /proc/sys/... file. Both '.' and '/' are recognized as
> + separators. Unrecognized parameters and invalid values
> + are reported in the kernel log. Sysctls registered
> + later by a loaded module cannot be set this way.
> + Example: sysctl.vm.swappiness=40
> +
> sysfs.deprecated=0|1 [KNL]
> Enable/disable old style sysfs layout for old udev
> on older distributions. When this option is enabled
> diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
> index c75bb4632ed1..653188c9c4c9 100644
> --- a/fs/proc/proc_sysctl.c
> +++ b/fs/proc/proc_sysctl.c
> @@ -14,6 +14,7 @@
> #include <linux/mm.h>
> #include <linux/module.h>
> #include <linux/bpf-cgroup.h>
> +#include <linux/mount.h>
> #include "internal.h"
>
> static const struct dentry_operations proc_sys_dentry_operations;
> @@ -1725,3 +1726,102 @@ int __init proc_sys_init(void)
>
> return sysctl_init();
> }
> +
> +/* Set sysctl value passed on kernel command line. */
> +static int process_sysctl_arg(char *param, char *val,
> + const char *unused, void *arg)
> +{
> + char *path;
> + struct vfsmount *proc_mnt = *((struct vfsmount **)arg);

I would just make this:

struct vfsmount **proc_mnt = (struct vfsmount **)arg;


> + struct file_system_type *proc_fs_type;
> + struct file *file;
> + int len;
> + int err;
> + loff_t pos = 0;
> + ssize_t wret;
> +
> + if (strncmp(param, "sysctl", sizeof("sysctl") - 1))
> + return 0;
> +
> + param += sizeof("sysctl") - 1;
> +
> + if (param[0] != '/' && param[0] != '.')
> + return 0;
> +
> + param++;
> +
> + if (!proc_mnt) {

if (!*proc_mnt) {

I would also add a comment here to explain that this is doing an
on-demand mount so that it doesn't have to mount proc if there are not
sysctl parameters.

> + proc_fs_type = get_fs_type("proc");
> + if (!proc_fs_type) {
> + pr_err("Failed to find procfs to set sysctl from command line");
> + return 0;
> + }
> + proc_mnt = kern_mount(proc_fs_type);

*proc_mnt = kern_mount(proc_fs_type);

> + put_filesystem(proc_fs_type);
> + if (IS_ERR(proc_mnt)) {

if (IS_ERR(*proc_mnt)) {

> + pr_err("Failed to mount procfs to set sysctl from command line");
> + return 0;
> + }
> + *((struct vfsmount **)arg) = proc_mnt;

Then drop this line.

> + }
> +
> + path = kasprintf(GFP_KERNEL, "sys/%s", param);
> + if (!path)
> + panic("%s: Failed to allocate path for %s\n", __func__, param);
> + strreplace(path, '.', '/');
> +
> + file = file_open_root(proc_mnt->mnt_root, proc_mnt, path, O_WRONLY, 0);

file = file_open_root((*proc_mnt)->mnt_root, *proc_mnt, path, O_WRONLY, 0);

> + if (IS_ERR(file)) {
> + err = PTR_ERR(file);
> + if (err == -ENOENT)
> + pr_err("Failed to set sysctl parameter '%s=%s': parameter not found",
> + param, val);
> + else if (err == -EACCES)
> + pr_err("Failed to set sysctl parameter '%s=%s': permission denied (read-only?)",
> + param, val);
> + else
> + pr_err("Error %pe opening proc file to set sysctl parameter '%s=%s'",
> + file, param, val);
> + goto out;
> + }
> + len = strlen(val);
> + wret = kernel_write(file, val, len, &pos);
> + if (wret < 0) {
> + err = wret;
> + if (err == -EINVAL)
> + pr_err("Failed to set sysctl parameter '%s=%s': invalid value",
> + param, val);
> + else
> + pr_err("Error %pe writing to proc file to set sysctl parameter '%s=%s'",
> + ERR_PTR(err), param, val);
> + } else if (wret != len) {
> + pr_err("Wrote only %ld bytes of %d writing to proc file %s to set sysctl parameter '%s=%s'",
> + wret, len, path, param, val);
> + }
> +
> + err = filp_close(file, NULL);
> + if (err)
> + pr_err("Error %pe closing proc file to set sysctl parameter '%s=%s'",
> + ERR_PTR(err), param, val);
> +out:
> + kfree(path);
> + return 0;
> +}
> +
> +void do_sysctl_args(void)
> +{
> + char *command_line;
> + struct vfsmount *proc_mnt = NULL;
> +
> + command_line = kstrdup(saved_command_line, GFP_KERNEL);
> + if (!command_line)
> + panic("%s: Failed to allocate copy of command line\n", __func__);
> +
> + parse_args("Setting sysctl args", command_line,
> + NULL, 0, -1, -1, &proc_mnt, process_sysctl_arg);
> +
> + if (proc_mnt)
> + kern_unmount(proc_mnt);
> +
> + kfree(command_line);
> +}
> diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
> index 02fa84493f23..5f3f2a00d75f 100644
> --- a/include/linux/sysctl.h
> +++ b/include/linux/sysctl.h
> @@ -206,6 +206,7 @@ struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
> void unregister_sysctl_table(struct ctl_table_header * table);
>
> extern int sysctl_init(void);
> +void do_sysctl_args(void);
>
> extern struct ctl_table sysctl_mount_point[];
>
> @@ -236,6 +237,9 @@ static inline void setup_sysctl_set(struct ctl_table_set *p,
> {
> }
>
> +void do_sysctl_args(void)

As with the others in the no-op case:

static inline void do_sysctl_args(void)

> +{
> +}
> #endif /* CONFIG_SYSCTL */
>
> int sysctl_max_threads(struct ctl_table *table, int write,
> diff --git a/init/main.c b/init/main.c
> index ee4947af823f..a91ea166a731 100644
> --- a/init/main.c
> +++ b/init/main.c
> @@ -1367,6 +1367,8 @@ static int __ref kernel_init(void *unused)
>
> rcu_end_inkernel_boot();
>
> + do_sysctl_args();
> +
> if (ramdisk_execute_command) {
> ret = run_init_process(ramdisk_execute_command);
> if (!ret)
> --
> 2.25.1
>

Otherwise, yes, looks good!

--
Kees Cook

\
 
 \ /
  Last update: 2020-03-30 19:41    [W:0.563 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site