Messages in this thread | | | Date | Mon, 30 Mar 2020 09:38:46 -0600 | From | Rob Herring <> | Subject | Re: [PATCH 1/4] dt-bindings: display: Add IPK DSI subsystem bindings |
| |
On Tue, 24 Mar 2020 18:18:19 +0100, Angelo Ribeiro wrote: > Add dt-bindings for Synopsys DesignWare MIPI DSI Host and VPG (Video > Pattern Generator) support in the IPK display subsystem. > > The Synopsys DesignWare IPK display video pipeline is composed by a DSI > controller (snps,dw-ipk-dsi) and a VPG (snps,dw-ipk-vpg) as DPI > stimulus. Typically is used the Raspberry Pi > (raspberrypi,7inch-touchscreen-panel) as DSI panel that requires a > I2C controller (snps,designware-i2c). > > Cc: David Airlie <airlied@linux.ie> > Cc: Daniel Vetter <daniel@ffwll.ch> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Signed-off-by: Angelo Ribeiro <angelo.ribeiro@synopsys.com> > --- > .../bindings/display/snps,dw-ipk-dsi.yaml | 163 +++++++++++++++++++++ > .../bindings/display/snps,dw-ipk-vpg.yaml | 77 ++++++++++ > 2 files changed, 240 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/snps,dw-ipk-dsi.yaml > create mode 100644 Documentation/devicetree/bindings/display/snps,dw-ipk-vpg.yaml >
My bot found errors running 'make dt_binding_check' on your patch:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/snps,dw-ipk-vpg.yaml: properties:reg:minItems: False schema does not allow 2 /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/snps,dw-ipk-vpg.yaml: properties:reg:maxItems: False schema does not allow 2 /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/snps,dw-ipk-vpg.yaml: properties:resets:minItems: False schema does not allow 2 /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/snps,dw-ipk-vpg.yaml: properties:resets:maxItems: False schema does not allow 2 Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/display/snps,dw-ipk-vpg.example.dts' failed make[1]: *** [Documentation/devicetree/bindings/display/snps,dw-ipk-vpg.example.dts] Error 1 make[1]: *** Waiting for unfinished jobs.... Makefile:1262: recipe for target 'dt_binding_check' failed make: *** [dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1260819
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
| |