lkml.org 
[lkml]   [2020]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 1/4] net: dsa: allow switch drivers to override default slave PHY addresses
Date
Avoid having to define a PHY for every physical port when PHY addresses
are fixed, but port index != PHY address.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---
include/net/dsa.h | 1 +
net/dsa/slave.c | 10 ++++++++--
2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/net/dsa.h b/include/net/dsa.h
index aeb411e77b9a..8216f3687799 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -391,6 +391,7 @@ struct dsa_switch_ops {

int (*setup)(struct dsa_switch *ds);
void (*teardown)(struct dsa_switch *ds);
+ int (*get_phy_address)(struct dsa_switch *ds, int port);
u32 (*get_phy_flags)(struct dsa_switch *ds, int port);

/*
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 8ced165a7908..1c78f8cae9e9 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1546,7 +1546,7 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
struct dsa_switch *ds = dp->ds;
phy_interface_t mode;
u32 phy_flags = 0;
- int ret;
+ int addr, ret;

ret = of_get_phy_mode(port_dn, &mode);
if (ret)
@@ -1578,7 +1578,13 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
/* We could not connect to a designated PHY or SFP, so try to
* use the switch internal MDIO bus instead
*/
- ret = dsa_slave_phy_connect(slave_dev, dp->index);
+
+ if (ds->ops->get_phy_address)
+ addr = ds->ops->get_phy_address(ds, dp->index);
+ else
+ addr = dp->index;
+
+ ret = dsa_slave_phy_connect(slave_dev, addr);
if (ret) {
netdev_err(slave_dev,
"failed to connect to port %d: %d\n",
--
2.17.1
\
 
 \ /
  Last update: 2020-03-30 15:54    [W:0.095 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site