lkml.org 
[lkml]   [2020]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] Input: elants_i2c - support palm detection
Date
> -----Original Message-----
> From: Peter Hutterer [mailto:peter.hutterer@who-t.net]
> Sent: Monday, March 30, 2020 11:48 AM
> To: Johnny.Chuang
> Cc: 'Johnny Chuang'; 'Dmitry Torokhov'; 'Benjamin Tissoires';
> linux-kernel@vger.kernel.org; linux-input@vger.kernel.org; 'Rob
Schonberger';
> 'James Chen'; 'Jennifer Tsai'; 'Paul Liang'; 'Jeff Chuang'
> Subject: Re: [PATCH] Input: elants_i2c - support palm detection
>
> On Mon, Mar 30, 2020 at 08:59:51AM +0800, Johnny.Chuang wrote:
> > > -----Original Message-----
> > > From: Peter Hutterer [mailto:peter.hutterer@who-t.net]
> > > Sent: Sunday, March 29, 2020 10:15 AM
> > > To: Johnny Chuang
> > > Cc: Dmitry Torokhov; Benjamin Tissoires; linux-kernel@vger.kernel.org;
> > > linux-input@vger.kernel.org; Rob Schonberger; Johnny Chuang; James
> Chen;
> > > Jennifer Tsai; Paul Liang; Jeff Chuang
> > > Subject: Re: [PATCH] Input: elants_i2c - support palm detection
> > >
> > > On Thu, Mar 26, 2020 at 03:58:45PM +0800, Johnny Chuang wrote:
> > > > From: Johnny Chuang <johnny.chuang@emc.com.tw>
> > > >
> > > > Elan define finger/palm detection on the least significant bit of
byte
> > 33.
> > > > The default value is 1 for all firmwares, which report as
> > MT_TOOL_FINGER.
> > > > If firmware support palm detection, the bit will change to 0 and
> > > > report as MT_TOOL_PALM when firmware detecting palm.
> > > >
> > > > Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
> > > > ---
> > > > drivers/input/touchscreen/elants_i2c.c | 11 ++++++++++-
> > > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/input/touchscreen/elants_i2c.c
> > > > b/drivers/input/touchscreen/elants_i2c.c
> > > > index 14c577c..3b4d9eb3 100644
> > > > --- a/drivers/input/touchscreen/elants_i2c.c
> > > > +++ b/drivers/input/touchscreen/elants_i2c.c
> > > > @@ -73,6 +73,7 @@
> > > > #define FW_POS_STATE 1
> > > > #define FW_POS_TOTAL 2
> > > > #define FW_POS_XY 3
> > > > +#define FW_POS_TOOL_TYPE 33
> > > > #define FW_POS_CHECKSUM 34
> > > > #define FW_POS_WIDTH 35
> > > > #define FW_POS_PRESSURE 45
> > > > @@ -842,6 +843,7 @@ static void elants_i2c_mt_event(struct
> elants_data
> > > > *ts, u8 *buf) {
> > > > struct input_dev *input = ts->input;
> > > > unsigned int n_fingers;
> > > > + unsigned int tool_type;
> > > > u16 finger_state;
> > > > int i;
> > > >
> > > > @@ -852,6 +854,12 @@ static void elants_i2c_mt_event(struct
> elants_data
> > > *ts, u8 *buf)
> > > > dev_dbg(&ts->client->dev,
> > > > "n_fingers: %u, state: %04x\n", n_fingers,
finger_state);
> > > >
> > > > + /* Note: all fingers have the same tool type */
> > > > + if (buf[FW_POS_TOOL_TYPE] & 0x01)
> > > > + tool_type = MT_TOOL_FINGER;
> > > > + else
> > > > + tool_type = MT_TOOL_PALM;
> > > > +
> > > > for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
> > > > if (finger_state & 1) {
> > > > unsigned int x, y, p, w;
> > > > @@ -867,7 +875,7 @@ static void elants_i2c_mt_event(struct
> elants_data
> > > *ts, u8 *buf)
> > > > i, x, y, p, w);
> > > >
> > > > input_mt_slot(input, i);
> > > > - input_mt_report_slot_state(input,
MT_TOOL_FINGER,
> > true);
> > > > + input_mt_report_slot_state(input, tool_type,
true);
> > > > input_event(input, EV_ABS,
ABS_MT_POSITION_X, x);
> > > > input_event(input, EV_ABS,
ABS_MT_POSITION_Y, y);
> > > > input_event(input, EV_ABS, ABS_MT_PRESSURE,
p); @@
> > > -1307,6 +1315,7
> > > > @@ static int elants_i2c_probe(struct i2c_client *client,
> > > > input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0,
ts->y_max,
> 0,
> > > 0);
> > > > input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255,
0,
> 0);
> > > > input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0,
0);
> > > > + input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE, 0,
> > > MT_TOOL_MAX, 0,
> > > > +0);
> > >
> > > if you're only reporting pen and palm, can we set this to MT_TOOL_PALM
> > > instead? Otherwise you're indicating you may also send MT_TOOL_DIAL
> which
> > > is unlikely on this hardware :)
> > >
> >
> > Yes, we do not have MT_TOOL_DIAL on touch screen.
> > So I need to modify MT_TOOL_MAX to MT_TOOL_PALM, right?
>
> yes please.
>
> Cheers,
> Peter
>

OK, I will submit patch v2 today.

> >
> > > Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> otherwise
> > >
> > > Cheers,
> > > Peter
> > >
> > > > input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
> > > > input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
> > > > input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
> > > > --
> > > > 2.7.4
> > > >
> >

\
 
 \ /
  Last update: 2020-03-30 07:46    [W:0.425 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site