lkml.org 
[lkml]   [2020]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/7] dt-bindings: timer: Add bindings for NVIDIA Tegra186 timers
On Fri, Mar 20, 2020 at 02:34:46PM +0100, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
>
> The NVIDIA Tegra186 SoC contains an IP block that provides a register
> interface for ten timers with a 29-bit counter that can generate one-
> shot, periodic or watchdog interrupts.
>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> .../bindings/timer/nvidia,tegra186-timer.yaml | 55 +++++++++++++++++++
> 1 file changed, 55 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
>
> diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
> new file mode 100644
> index 000000000000..f9b55041a5ca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NVIDIA Tegra186 timers
> +
> +maintainers:
> + - Thierry Reding <thierry.reding@gmail.com>
> + - Jonathan Hunter <jonathanh@nvidia.com>
> +
> +description: |
> + The Tegra186 timer provides ten 29-bit timer counters and one 32-bit TSC
> + (timestamp counter). The timers run at either a fixed 1 MHz clock rate
> + derived from the oscillator clock. Each timer can be programmed to raise
> + one-shot, periodic, or watchdog interrupts.
> +
> +properties:
> + compatible:
> + oneOf:
> + - description: NVIDIA Tegra186
> + items:
> + - const: nvidia,tegra186-timer
> +
> + - description: NVIDIA Tegra194
> + items:
> + - const: nvidia,tegra194-timer
> + - const: nvidia,tegra186-timer
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 10

required props?

Also, add:

additionalProperties: false

> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + timer@3010000 {
> + compatible = "nvidia,tegra186-timer";
> + reg = <0x03010000 0x000e0000>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";

Don't show status in examples.

> + };
> --
> 2.24.1
>

\
 
 \ /
  Last update: 2020-03-31 01:29    [W:0.199 / U:1.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site