lkml.org 
[lkml]   [2020]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
Date
From: Sriharsha Allenki <sallenki@codeaurora.org>

Adds bindings for Qualcomm's 28 nm USB PHY supporting Low-Speed, Full-Speed
and Hi-Speed USB connectivity on Qualcomm chipsets.

[bod: Converted to YAML. Changed name dropping snps, 28nm components]

Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../bindings/phy/qcom,usb-hs-28nm.yaml | 90 +++++++++++++++++++
1 file changed, 90 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
new file mode 100644
index 000000000000..ca6a0836b53c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+ Qualcomm Low-Speed, Full-Speed, Hi-Speed 28nm USB PHY
+
+properties:
+ compatible:
+ enum:
+ - qcom,usb-hs-28nm-femtophy
+
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: rpmcc ref clock
+ - description: PHY AHB clock
+ - description: Rentention clock
+
+ clock-names:
+ items:
+ - const: ref
+ - const: ahb
+ - const: sleep
+
+ resets:
+ items:
+ - description: PHY core reset
+ - description: POR reset
+
+ reset-names:
+ items:
+ - const: phy
+ - const: por
+
+ vdd-supply:
+ description: phandle to the regulator VDD supply node.
+
+ vdda1p8-supply:
+ description: phandle to the regulator 1.8V supply node.
+
+ vdda3p3-supply:
+ description: phandle to the regulator 3.3V supply node.
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - vdd-supply
+ - vdda1p8-supply
+ - vdda3p3-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ usb2_phy_prim: phy@7a000 {
+ compatible = "qcom,usb-hs-28nm-femtophy";
+ reg = <0x0007a000 0x200>;
+ #phy-cells = <0>;
+ clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "ahb", "sleep";
+ resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+ <&gcc GCC_USB2A_PHY_BCR>;
+ reset-names = "phy", "por";
+ vdd-supply = <&vreg_l4_1p2>;
+ vdda1p8-supply = <&vreg_l5_1p8>;
+ vdda3p3-supply = <&vreg_l12_3p3>;
+ };
+...
--
2.25.1
\
 
 \ /
  Last update: 2020-03-03 18:14    [W:0.112 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site