lkml.org 
[lkml]   [2020]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 2/2] clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk
On Tue, Feb 11, 2020 at 05:43:56PM +0530, Taniya Das wrote:
> The disp_cc_mdss_rscc_ahb_clk is default enabled from hardware and thus
> does not require to be marked CRITICAL. This which would allow the RCG to
> be turned OFF when the display turns OFF and not blocking XO.
>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> drivers/clk/qcom/dispcc-sc7180.c | 19 -------------------
> 1 file changed, 19 deletions(-)
>
> diff --git a/drivers/clk/qcom/dispcc-sc7180.c b/drivers/clk/qcom/dispcc-sc7180.c
> index dd7af41..0a5d395 100644
> --- a/drivers/clk/qcom/dispcc-sc7180.c
> +++ b/drivers/clk/qcom/dispcc-sc7180.c
> @@ -592,24 +592,6 @@ static struct clk_branch disp_cc_mdss_rot_clk = {
> },
> };
>
> -static struct clk_branch disp_cc_mdss_rscc_ahb_clk = {
> - .halt_reg = 0x400c,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0x400c,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "disp_cc_mdss_rscc_ahb_clk",
> - .parent_data = &(const struct clk_parent_data){
> - .hw = &disp_cc_mdss_ahb_clk_src.clkr.hw,
> - },
> - .num_parents = 1,
> - .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -
> static struct clk_branch disp_cc_mdss_rscc_vsync_clk = {
> .halt_reg = 0x4008,
> .halt_check = BRANCH_HALT,
> @@ -687,7 +669,6 @@ static struct clk_regmap *disp_cc_sc7180_clocks[] = {
> [DISP_CC_MDSS_PCLK0_CLK_SRC] = &disp_cc_mdss_pclk0_clk_src.clkr,
> [DISP_CC_MDSS_ROT_CLK] = &disp_cc_mdss_rot_clk.clkr,
> [DISP_CC_MDSS_ROT_CLK_SRC] = &disp_cc_mdss_rot_clk_src.clkr,
> - [DISP_CC_MDSS_RSCC_AHB_CLK] = &disp_cc_mdss_rscc_ahb_clk.clkr,
> [DISP_CC_MDSS_RSCC_VSYNC_CLK] = &disp_cc_mdss_rscc_vsync_clk.clkr,
> [DISP_CC_MDSS_VSYNC_CLK] = &disp_cc_mdss_vsync_clk.clkr,
> [DISP_CC_MDSS_VSYNC_CLK_SRC] = &disp_cc_mdss_vsync_clk_src.clkr,

We found that this change leads to a panic at boot time on SC7180 devices
without display configuration (e.g. the SC7180 IDP with the current DT):

[ 2.412820] SError Interrupt on CPU6, code 0xbe000411 -- SError
[ 2.412822] CPU: 6 PID: 1 Comm: swapper/0 Tainted: G S 5.4.22 #103
[ 2.412822] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
[ 2.412823] pstate: 20c00089 (nzCv daIf +PAN +UAO)
[ 2.412823] pc : regmap_mmio_read32le+0x28/0x40
[ 2.412823] lr : regmap_mmio_read+0x44/0x6c
[ 2.412824] sp : ffffffc01005ba90
[ 2.412824] x29: ffffffc01005ba90 x28: 0000000000000000
[ 2.412825] x27: 0000000000000000 x26: 0000000000000000
[ 2.412826] x25: 0000000000000000 x24: ffffffd1f4aed018
[ 2.412827] x23: ffffffd1f4c12148 x22: ffffff8177a6c800
[ 2.412827] x21: 0000000000002048 x20: ffffff8177489e00
[ 2.412828] x19: 0000000000002048 x18: 000000004a746f4b
[ 2.412829] x17: 00000000d0e09034 x16: 000000005079b450
[ 2.412830] x15: 000000003e3bf7ed x14: 0000000000007fff
[ 2.412830] x13: ffffff8177309b40 x12: 0000000000000000
[ 2.412831] x11: 0000000000000000 x10: 0000000000000000
[ 2.412831] x9 : 0000000000000001 x8 : ffffffc011c02048
[ 2.412832] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000
[ 2.412833] x5 : 0000000000000000 x4 : 0000000000000000
[ 2.412834] x3 : 0000000000000000 x2 : ffffffc01005bb84
[ 2.412834] x1 : 0000000000002048 x0 : 0000000080000000
[ 2.412835] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 2.412836] CPU: 6 PID: 1 Comm: swapper/0 Tainted: G S 5.4.22 #103
[ 2.412836] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
[ 2.412836] Call trace:
[ 2.412837] dump_backtrace+0x0/0x150
[ 2.412837] show_stack+0x20/0x2c
[ 2.412837] dump_stack+0xa0/0xd8
[ 2.412838] panic+0x158/0x360
[ 2.412838] panic+0x0/0x360
[ 2.412838] arm64_serror_panic+0x78/0x84
[ 2.412839] do_serror+0x110/0x118
[ 2.412839] el1_error+0x84/0xf8
[ 2.412839] regmap_mmio_read32le+0x28/0x40
[ 2.412840] regmap_mmio_read+0x44/0x6c
[ 2.412840] _regmap_bus_reg_read+0x34/0x44
[ 2.412841] _regmap_read+0x88/0x164
[ 2.412841] regmap_read+0x54/0x78
[ 2.412841] clk_is_enabled_regmap+0x3c/0x8c
[ 2.412842] clk_core_is_enabled+0x68/0xac
[ 2.412842] clk_disable_unused_subtree+0x90/0x22c
[ 2.412843] clk_disable_unused_subtree+0x34/0x22c
[ 2.412843] clk_disable_unused+0x74/0x108
[ 2.412843] do_one_initcall+0x13c/0x2c8
[ 2.412844] do_initcall_level+0x144/0x16c
[ 2.412844] do_basic_setup+0x30/0x48
[ 2.412844] kernel_init_freeable+0xc4/0x140
[ 2.412845] kernel_init+0x14/0x100
[ 2.412845] ret_from_fork+0x10/0x18
[ 2.412858] SMP: stopping secondary CPUs
[ 2.412859] Kernel Offset: 0x11e3a00000 from 0xffffffc010000000
[ 2.412859] PHYS_OFFSET: 0xffffffe780000000
[ 2.412860] CPU features: 0x0006,2a80aa18
[ 2.412860] Memory Limit: none

\
 
 \ /
  Last update: 2020-03-03 21:19    [W:0.470 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site