lkml.org 
[lkml]   [2020]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/2] drm/lima: Add optional devfreq and cooling device support
Applied to drm-misc-next.

On Sun, Mar 22, 2020 at 10:24 AM Qiang Yu <yuq825@gmail.com> wrote:
>
> Looks good for me, patch is:
> Reviewed-by: Qiang Yu <yuq825@gmail.com>
>
> Regards,
> Qiang
>
> On Fri, Mar 20, 2020 at 4:35 AM Martin Blumenstingl
> <martin.blumenstingl@googlemail.com> wrote:
> >
> > Most platforms with a Mali-400 or Mali-450 GPU also have support for
> > changing the GPU clock frequency. Add devfreq support so the GPU clock
> > rate is updated based on the actual GPU usage when the
> > "operating-points-v2" property is present in the board.dts.
> >
> > The actual devfreq code is taken from panfrost_devfreq.c and modified so
> > it matches what the lima hardware needs:
> > - a call to dev_pm_opp_set_clkname() during initialization because there
> > are two clocks on Mali-4x0 IPs. "core" is the one that actually clocks
> > the GPU so we need to control it using devfreq.
> > - locking when reading or writing the devfreq statistics because (unlike
> > than panfrost) we have multiple PP and GP IRQs which may finish jobs
> > concurrently.
> >
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > ---
> > drivers/gpu/drm/lima/Kconfig | 2 +
> > drivers/gpu/drm/lima/Makefile | 3 +-
> > drivers/gpu/drm/lima/lima_devfreq.c | 234 ++++++++++++++++++++++++++++
> > drivers/gpu/drm/lima/lima_devfreq.h | 41 +++++
> > drivers/gpu/drm/lima/lima_device.c | 4 +
> > drivers/gpu/drm/lima/lima_device.h | 3 +
> > drivers/gpu/drm/lima/lima_drv.c | 14 +-
> > drivers/gpu/drm/lima/lima_sched.c | 7 +
> > drivers/gpu/drm/lima/lima_sched.h | 3 +
> > 9 files changed, 308 insertions(+), 3 deletions(-)
> > create mode 100644 drivers/gpu/drm/lima/lima_devfreq.c
> > create mode 100644 drivers/gpu/drm/lima/lima_devfreq.h
> >
> > diff --git a/drivers/gpu/drm/lima/Kconfig b/drivers/gpu/drm/lima/Kconfig
> > index d589f09d04d9..fa1d4f5df31e 100644
> > --- a/drivers/gpu/drm/lima/Kconfig
> > +++ b/drivers/gpu/drm/lima/Kconfig
> > @@ -10,5 +10,7 @@ config DRM_LIMA
> > depends on OF
> > select DRM_SCHED
> > select DRM_GEM_SHMEM_HELPER
> > + select PM_DEVFREQ
> > + select DEVFREQ_GOV_SIMPLE_ONDEMAND
> > help
> > DRM driver for ARM Mali 400/450 GPUs.
> > diff --git a/drivers/gpu/drm/lima/Makefile b/drivers/gpu/drm/lima/Makefile
> > index a85444b0a1d4..5e5c29875e9c 100644
> > --- a/drivers/gpu/drm/lima/Makefile
> > +++ b/drivers/gpu/drm/lima/Makefile
> > @@ -14,6 +14,7 @@ lima-y := \
> > lima_sched.o \
> > lima_ctx.o \
> > lima_dlbu.o \
> > - lima_bcast.o
> > + lima_bcast.o \
> > + lima_devfreq.o
> >
> > obj-$(CONFIG_DRM_LIMA) += lima.o
> > diff --git a/drivers/gpu/drm/lima/lima_devfreq.c b/drivers/gpu/drm/lima/lima_devfreq.c
> > new file mode 100644
> > index 000000000000..8c4d21d07529
> > --- /dev/null
> > +++ b/drivers/gpu/drm/lima/lima_devfreq.c
> > @@ -0,0 +1,234 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > + *
> > + * Based on panfrost_devfreq.c:
> > + * Copyright 2019 Collabora ltd.
> > + */
> > +#include <linux/clk.h>
> > +#include <linux/devfreq.h>
> > +#include <linux/devfreq_cooling.h>
> > +#include <linux/device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_opp.h>
> > +#include <linux/property.h>
> > +
> > +#include "lima_device.h"
> > +#include "lima_devfreq.h"
> > +
> > +static void lima_devfreq_update_utilization(struct lima_devfreq *devfreq)
> > +{
> > + ktime_t now, last;
> > +
> > + now = ktime_get();
> > + last = devfreq->time_last_update;
> > +
> > + if (devfreq->busy_count > 0)
> > + devfreq->busy_time += ktime_sub(now, last);
> > + else
> > + devfreq->idle_time += ktime_sub(now, last);
> > +
> > + devfreq->time_last_update = now;
> > +}
> > +
> > +static int lima_devfreq_target(struct device *dev, unsigned long *freq,
> > + u32 flags)
> > +{
> > + struct dev_pm_opp *opp;
> > + int err;
> > +
> > + opp = devfreq_recommended_opp(dev, freq, flags);
> > + if (IS_ERR(opp))
> > + return PTR_ERR(opp);
> > + dev_pm_opp_put(opp);
> > +
> > + err = dev_pm_opp_set_rate(dev, *freq);
> > + if (err)
> > + return err;
> > +
> > + return 0;
> > +}
> > +
> > +static void lima_devfreq_reset(struct lima_devfreq *devfreq)
> > +{
> > + devfreq->busy_time = 0;
> > + devfreq->idle_time = 0;
> > + devfreq->time_last_update = ktime_get();
> > +}
> > +
> > +static int lima_devfreq_get_dev_status(struct device *dev,
> > + struct devfreq_dev_status *status)
> > +{
> > + struct lima_device *ldev = dev_get_drvdata(dev);
> > + struct lima_devfreq *devfreq = &ldev->devfreq;
> > + unsigned long irqflags;
> > +
> > + status->current_frequency = clk_get_rate(ldev->clk_gpu);
> > +
> > + spin_lock_irqsave(&devfreq->lock, irqflags);
> > +
> > + lima_devfreq_update_utilization(devfreq);
> > +
> > + status->total_time = ktime_to_ns(ktime_add(devfreq->busy_time,
> > + devfreq->idle_time));
> > + status->busy_time = ktime_to_ns(devfreq->busy_time);
> > +
> > + lima_devfreq_reset(devfreq);
> > +
> > + spin_unlock_irqrestore(&devfreq->lock, irqflags);
> > +
> > + dev_dbg(ldev->dev, "busy %lu total %lu %lu %% freq %lu MHz\n",
> > + status->busy_time, status->total_time,
> > + status->busy_time / (status->total_time / 100),
> > + status->current_frequency / 1000 / 1000);
> > +
> > + return 0;
> > +}
> > +
> > +static struct devfreq_dev_profile lima_devfreq_profile = {
> > + .polling_ms = 50, /* ~3 frames */
> > + .target = lima_devfreq_target,
> > + .get_dev_status = lima_devfreq_get_dev_status,
> > +};
> > +
> > +void lima_devfreq_fini(struct lima_device *ldev)
> > +{
> > + struct lima_devfreq *devfreq = &ldev->devfreq;
> > +
> > + if (devfreq->cooling) {
> > + devfreq_cooling_unregister(devfreq->cooling);
> > + devfreq->cooling = NULL;
> > + }
> > +
> > + if (devfreq->devfreq) {
> > + devm_devfreq_remove_device(&ldev->pdev->dev,
> > + devfreq->devfreq);
> > + devfreq->devfreq = NULL;
> > + }
> > +
> > + if (devfreq->opp_of_table_added) {
> > + dev_pm_opp_of_remove_table(&ldev->pdev->dev);
> > + devfreq->opp_of_table_added = false;
> > + }
> > +
> > + if (devfreq->regulators_opp_table) {
> > + dev_pm_opp_put_regulators(devfreq->regulators_opp_table);
> > + devfreq->regulators_opp_table = NULL;
> > + }
> > +
> > + if (devfreq->clkname_opp_table) {
> > + dev_pm_opp_put_clkname(devfreq->clkname_opp_table);
> > + devfreq->clkname_opp_table = NULL;
> > + }
> > +}
> > +
> > +int lima_devfreq_init(struct lima_device *ldev)
> > +{
> > + struct thermal_cooling_device *cooling;
> > + struct device *dev = &ldev->pdev->dev;
> > + struct opp_table *opp_table;
> > + struct devfreq *devfreq;
> > + struct lima_devfreq *ldevfreq = &ldev->devfreq;
> > + struct dev_pm_opp *opp;
> > + unsigned long cur_freq;
> > + int ret;
> > +
> > + if (!device_property_present(dev, "operating-points-v2"))
> > + /* Optional, continue without devfreq */
> > + return 0;
> > +
> > + spin_lock_init(&ldevfreq->lock);
> > +
> > + opp_table = dev_pm_opp_set_clkname(dev, "core");
> > + if (IS_ERR(opp_table)) {
> > + ret = PTR_ERR(opp_table);
> > + goto err_fini;
> > + }
> > +
> > + ldevfreq->clkname_opp_table = opp_table;
> > +
> > + opp_table = dev_pm_opp_set_regulators(dev,
> > + (const char *[]){ "mali" },
> > + 1);
> > + if (IS_ERR(opp_table)) {
> > + ret = PTR_ERR(opp_table);
> > +
> > + /* Continue if the optional regulator is missing */
> > + if (ret != -ENODEV)
> > + goto err_fini;
> > + } else {
> > + ldevfreq->regulators_opp_table = opp_table;
> > + }
> > +
> > + ret = dev_pm_opp_of_add_table(dev);
> > + if (ret)
> > + goto err_fini;
> > + ldevfreq->opp_of_table_added = true;
> > +
> > + lima_devfreq_reset(ldevfreq);
> > +
> > + cur_freq = clk_get_rate(ldev->clk_gpu);
> > +
> > + opp = devfreq_recommended_opp(dev, &cur_freq, 0);
> > + if (IS_ERR(opp)) {
> > + ret = PTR_ERR(opp);
> > + goto err_fini;
> > + }
> > +
> > + lima_devfreq_profile.initial_freq = cur_freq;
> > + dev_pm_opp_put(opp);
> > +
> > + devfreq = devm_devfreq_add_device(dev, &lima_devfreq_profile,
> > + DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
> > + if (IS_ERR(devfreq)) {
> > + dev_err(dev, "Couldn't initialize GPU devfreq\n");
> > + ret = PTR_ERR(devfreq);
> > + goto err_fini;
> > + }
> > +
> > + ldevfreq->devfreq = devfreq;
> > +
> > + cooling = of_devfreq_cooling_register(dev->of_node, devfreq);
> > + if (IS_ERR(cooling))
> > + dev_info(dev, "Failed to register cooling device\n");
> > + else
> > + ldevfreq->cooling = cooling;
> > +
> > + return 0;
> > +
> > +err_fini:
> > + lima_devfreq_fini(ldev);
> > + return ret;
> > +}
> > +
> > +void lima_devfreq_record_busy(struct lima_devfreq *devfreq)
> > +{
> > + unsigned long irqflags;
> > +
> > + if (!devfreq->devfreq)
> > + return;
> > +
> > + spin_lock_irqsave(&devfreq->lock, irqflags);
> > +
> > + lima_devfreq_update_utilization(devfreq);
> > +
> > + devfreq->busy_count++;
> > +
> > + spin_unlock_irqrestore(&devfreq->lock, irqflags);
> > +}
> > +
> > +void lima_devfreq_record_idle(struct lima_devfreq *devfreq)
> > +{
> > + unsigned long irqflags;
> > +
> > + if (!devfreq->devfreq)
> > + return;
> > +
> > + spin_lock_irqsave(&devfreq->lock, irqflags);
> > +
> > + lima_devfreq_update_utilization(devfreq);
> > +
> > + WARN_ON(--devfreq->busy_count < 0);
> > +
> > + spin_unlock_irqrestore(&devfreq->lock, irqflags);
> > +}
> > diff --git a/drivers/gpu/drm/lima/lima_devfreq.h b/drivers/gpu/drm/lima/lima_devfreq.h
> > new file mode 100644
> > index 000000000000..8d71ba9fb22a
> > --- /dev/null
> > +++ b/drivers/gpu/drm/lima/lima_devfreq.h
> > @@ -0,0 +1,41 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/* Copyright 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com> */
> > +
> > +#ifndef __LIMA_DEVFREQ_H__
> > +#define __LIMA_DEVFREQ_H__
> > +
> > +#include <linux/spinlock.h>
> > +#include <linux/ktime.h>
> > +
> > +struct devfreq;
> > +struct opp_table;
> > +struct thermal_cooling_device;
> > +
> > +struct lima_device;
> > +
> > +struct lima_devfreq {
> > + struct devfreq *devfreq;
> > + struct opp_table *clkname_opp_table;
> > + struct opp_table *regulators_opp_table;
> > + struct thermal_cooling_device *cooling;
> > + bool opp_of_table_added;
> > +
> > + ktime_t busy_time;
> > + ktime_t idle_time;
> > + ktime_t time_last_update;
> > + int busy_count;
> > + /*
> > + * Protect busy_time, idle_time, time_last_update and busy_count
> > + * because these can be updated concurrently, for example by the GP
> > + * and PP interrupts.
> > + */
> > + spinlock_t lock;
> > +};
> > +
> > +int lima_devfreq_init(struct lima_device *ldev);
> > +void lima_devfreq_fini(struct lima_device *ldev);
> > +
> > +void lima_devfreq_record_busy(struct lima_devfreq *devfreq);
> > +void lima_devfreq_record_idle(struct lima_devfreq *devfreq);
> > +
> > +#endif
> > diff --git a/drivers/gpu/drm/lima/lima_device.c b/drivers/gpu/drm/lima/lima_device.c
> > index 19829b543024..7f1f7a1c03e5 100644
> > --- a/drivers/gpu/drm/lima/lima_device.c
> > +++ b/drivers/gpu/drm/lima/lima_device.c
> > @@ -214,6 +214,8 @@ static int lima_init_gp_pipe(struct lima_device *dev)
> > struct lima_sched_pipe *pipe = dev->pipe + lima_pipe_gp;
> > int err;
> >
> > + pipe->ldev = dev;
> > +
> > err = lima_sched_pipe_init(pipe, "gp");
> > if (err)
> > return err;
> > @@ -244,6 +246,8 @@ static int lima_init_pp_pipe(struct lima_device *dev)
> > struct lima_sched_pipe *pipe = dev->pipe + lima_pipe_pp;
> > int err, i;
> >
> > + pipe->ldev = dev;
> > +
> > err = lima_sched_pipe_init(pipe, "pp");
> > if (err)
> > return err;
> > diff --git a/drivers/gpu/drm/lima/lima_device.h b/drivers/gpu/drm/lima/lima_device.h
> > index 31158d86271c..d6c0f8b8f7e8 100644
> > --- a/drivers/gpu/drm/lima/lima_device.h
> > +++ b/drivers/gpu/drm/lima/lima_device.h
> > @@ -8,6 +8,7 @@
> > #include <linux/delay.h>
> >
> > #include "lima_sched.h"
> > +#include "lima_devfreq.h"
> >
> > enum lima_gpu_id {
> > lima_gpu_mali400 = 0,
> > @@ -94,6 +95,8 @@ struct lima_device {
> >
> > u32 *dlbu_cpu;
> > dma_addr_t dlbu_dma;
> > +
> > + struct lima_devfreq devfreq;
> > };
> >
> > static inline struct lima_device *
> > diff --git a/drivers/gpu/drm/lima/lima_drv.c b/drivers/gpu/drm/lima/lima_drv.c
> > index 2daac64d8955..d9f64e52ae9e 100644
> > --- a/drivers/gpu/drm/lima/lima_drv.c
> > +++ b/drivers/gpu/drm/lima/lima_drv.c
> > @@ -10,6 +10,7 @@
> > #include <drm/drm_prime.h>
> > #include <drm/lima_drm.h>
> >
> > +#include "lima_device.h"
> > #include "lima_drv.h"
> > #include "lima_gem.h"
> > #include "lima_vm.h"
> > @@ -306,18 +307,26 @@ static int lima_pdev_probe(struct platform_device *pdev)
> > if (err)
> > goto err_out1;
> >
> > + err = lima_devfreq_init(ldev);
> > + if (err) {
> > + dev_err(&pdev->dev, "Fatal error during devfreq init\n");
> > + goto err_out2;
> > + }
> > +
> > /*
> > * Register the DRM device with the core and the connectors with
> > * sysfs.
> > */
> > err = drm_dev_register(ddev, 0);
> > if (err < 0)
> > - goto err_out2;
> > + goto err_out3;
> >
> > return 0;
> >
> > -err_out2:
> > +err_out3:
> > lima_device_fini(ldev);
> > +err_out2:
> > + lima_devfreq_fini(ldev);
> > err_out1:
> > drm_dev_put(ddev);
> > err_out0:
> > @@ -331,6 +340,7 @@ static int lima_pdev_remove(struct platform_device *pdev)
> > struct drm_device *ddev = ldev->ddev;
> >
> > drm_dev_unregister(ddev);
> > + lima_devfreq_fini(ldev);
> > lima_device_fini(ldev);
> > drm_dev_put(ddev);
> > lima_sched_slab_fini();
> > diff --git a/drivers/gpu/drm/lima/lima_sched.c b/drivers/gpu/drm/lima/lima_sched.c
> > index 3886999b4533..d937d626b892 100644
> > --- a/drivers/gpu/drm/lima/lima_sched.c
> > +++ b/drivers/gpu/drm/lima/lima_sched.c
> > @@ -5,6 +5,7 @@
> > #include <linux/slab.h>
> > #include <linux/xarray.h>
> >
> > +#include "lima_devfreq.h"
> > #include "lima_drv.h"
> > #include "lima_sched.h"
> > #include "lima_vm.h"
> > @@ -214,6 +215,8 @@ static struct dma_fence *lima_sched_run_job(struct drm_sched_job *job)
> > */
> > ret = dma_fence_get(task->fence);
> >
> > + lima_devfreq_record_busy(&pipe->ldev->devfreq);
> > +
> > pipe->current_task = task;
> >
> > /* this is needed for MMU to work correctly, otherwise GP/PP
> > @@ -285,6 +288,8 @@ static void lima_sched_timedout_job(struct drm_sched_job *job)
> > pipe->current_vm = NULL;
> > pipe->current_task = NULL;
> >
> > + lima_devfreq_record_idle(&pipe->ldev->devfreq);
> > +
> > drm_sched_resubmit_jobs(&pipe->base);
> > drm_sched_start(&pipe->base, true);
> > }
> > @@ -364,5 +369,7 @@ void lima_sched_pipe_task_done(struct lima_sched_pipe *pipe)
> > } else {
> > pipe->task_fini(pipe);
> > dma_fence_signal(task->fence);
> > +
> > + lima_devfreq_record_idle(&pipe->ldev->devfreq);
> > }
> > }
> > diff --git a/drivers/gpu/drm/lima/lima_sched.h b/drivers/gpu/drm/lima/lima_sched.h
> > index d64393fb50a9..19bbc5214cf2 100644
> > --- a/drivers/gpu/drm/lima/lima_sched.h
> > +++ b/drivers/gpu/drm/lima/lima_sched.h
> > @@ -6,6 +6,7 @@
> >
> > #include <drm/gpu_scheduler.h>
> >
> > +struct lima_device;
> > struct lima_vm;
> >
> > struct lima_sched_task {
> > @@ -44,6 +45,8 @@ struct lima_sched_pipe {
> > u32 fence_seqno;
> > spinlock_t fence_lock;
> >
> > + struct lima_device *ldev;
> > +
> > struct lima_sched_task *current_task;
> > struct lima_vm *current_vm;
> >
> > --
> > 2.25.2
> >

\
 
 \ /
  Last update: 2020-03-28 09:41    [W:0.079 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site