lkml.org 
[lkml]   [2020]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
Date
v2 - Addressed Andy Shevchenko's review comments.
- Fixed dt_binding_check error pointed out by Rob Herring.
- Removed pr_info message in ehci_brcm_init as suggested by
Greg Kroah-Hartman.

This adds support for the XHCI, EHCI and OHCI host controllers found
in Broadcom STB SoC's. These drivers depend on getting access to the
new Broadcom STB USB PHY driver through a device-tree phandle and
will fail if the driver is not available.

Al Cooper (4):
dt-bindings: Add Broadcom STB USB support
usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
usb: ehci: Add new EHCI driver for Broadcom STB SoC's
usb: host: Add ability to build new Broadcom STB USB drivers

.../bindings/usb/brcm,bcm7445-ehci.yaml | 61 ++++
.../devicetree/bindings/usb/usb-xhci.txt | 1 +
MAINTAINERS | 9 +
drivers/usb/host/Kconfig | 20 ++
drivers/usb/host/Makefile | 20 +-
drivers/usb/host/ehci-brcm.c | 290 ++++++++++++++++++
drivers/usb/host/xhci-brcm.c | 16 +
drivers/usb/host/xhci-brcm.h | 16 +
drivers/usb/host/xhci-plat.c | 11 +
9 files changed, 438 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
create mode 100644 drivers/usb/host/ehci-brcm.c
create mode 100644 drivers/usb/host/xhci-brcm.c
create mode 100644 drivers/usb/host/xhci-brcm.h

--
2.17.1

\
 
 \ /
  Last update: 2020-03-27 21:50    [W:0.139 / U:1.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site