lkml.org 
[lkml]   [2020]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] serial: sh-sci: Make sure status register SCxSR is read in correct sequence
Date
For SCIF and HSCIF interfaces the SCxSR register holds the status of
data that is to be read next from SCxRDR register, But where as for
SCIFA and SCIFB interfaces SCxSR register holds status of data that is
previously read from SCxRDR register.

This patch makes sure the status register is read depending on the port
types so that errors are caught accordingly.

Cc: <stable@vger.kernel.org>
Signed-off-by: Kazuhiro Fujita <kazuhiro.fujita.jg@renesas.com>
Signed-off-by: Hao Bui <hao.bui.yg@renesas.com>
Signed-off-by: KAZUMI HARADA <kazumi.harada.rh@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/tty/serial/sh-sci.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 0641a72..d646bc4 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -870,9 +870,16 @@ static void sci_receive_chars(struct uart_port *port)
tty_insert_flip_char(tport, c, TTY_NORMAL);
} else {
for (i = 0; i < count; i++) {
- char c = serial_port_in(port, SCxRDR);
-
- status = serial_port_in(port, SCxSR);
+ char c;
+
+ if (port->type == PORT_SCIF ||
+ port->type == PORT_HSCIF) {
+ status = serial_port_in(port, SCxSR);
+ c = serial_port_in(port, SCxRDR);
+ } else {
+ c = serial_port_in(port, SCxRDR);
+ status = serial_port_in(port, SCxSR);
+ }
if (uart_handle_sysrq_char(port, c)) {
count--; i--;
continue;
--
2.7.4
\
 
 \ /
  Last update: 2020-03-27 19:18    [W:0.074 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site