lkml.org 
[lkml]   [2020]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/3] dt-bindings: mfd: Add Gateworks System Controller bindings
On Fri, Mar 20, 2020 at 01:35:48PM -0700, Tim Harvey wrote:
> This patch adds documentation of device-tree bindings for the
> Gateworks System Controller (GSC).
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> v7:
> - change divider from mili-ohms to ohms
> - add constraints for voltage divider and offset
> - remove unnecessary ref for offset
> - renamed fan to fan-controller and changed base prop to reg
>
> v6:
> - fix typo
> - drop invalid description from #interrupt-cells property
> - fix adc pattern property
> - add unit suffix
> - replace hwmon/adc with adc/channel
> - changed adc type to mode and enum int
> - add unit suffix and drop ref for voltage-divider
> - moved fan to its own subnode with base register
>
> v5:
> - resolve dt_binding_check issues
>
> v4:
> - move to using pwm<n>_auto_point<m>_{pwm,temp} for FAN PWM
> - remove unncessary resolution/scaling properties for ADCs
> - update to yaml
> - remove watchdog
>
> v3:
> - replaced _ with -
> - remove input bindings
> - added full description of hwmon
> - fix unit address of hwmon child nodes
> ---
> .../devicetree/bindings/mfd/gateworks-gsc.yaml | 173 +++++++++++++++++++++
> 1 file changed, 173 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> new file mode 100644
> index 00000000..0457137
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> @@ -0,0 +1,173 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Gateworks System Controller multi-function device
> +
> +description: |
> + The GSC is a Multifunction I2C slave device with the following submodules:
> + - Watchdog Timer
> + - GPIO
> + - Pushbutton controller
> + - Hardware Monitor with ADC's for temperature and voltage rails and
> + fan controller
> +
> +maintainers:
> + - Tim Harvey <tharvey@gateworks.com>
> + - Robert Jones <rjones@gateworks.com>
> +
> +properties:
> + $nodename:
> + pattern: "gsc@[0-9a-f]{1,2}"
> + compatible:
> + const: gw,gsc
> +
> + reg:
> + description: I2C device address
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 1
> +
> + adc:
> + type: object
> + description: Optional Hardware Monitoring module
> +
> + properties:
> + compatible:
> + const: gw,gsc-adc
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + patternProperties:
> + "^channel@[0-9]+$":
> + type: object
> + description: |
> + Properties for a single ADC which can report cooked values
> + (ie temperature sensor based on thermister), raw values
> + (ie voltage rail with a pre-scaling resistor divider).
> +
> + properties:
> + reg:
> + description: Register of the ADC
> + maxItems: 1
> +
> + label:
> + description: Name of the ADC input
> +
> + gw,mode:
> + description: |
> + conversion mode:
> + 0 - temperature, in C*10
> + 1 - pre-scaled voltage value
> + 2 - scaled voltage based on an optional resistor divider
> + and optional offset
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2]
> +
> + gw,voltage-divider-ohms:
> + description: values of resistors for divider on raw ADC input
> + maxItems: 2
> + items:
> + minimum: 1000
> + maximum: 1000000
> +
> + gw,voltage-offset-microvolt:
> + description: |
> + A positive voltage offset to apply to a raw ADC
> + (ie to compensate for a diode drop).
> + minimum: 0
> + maximum: 1000000
> +
> + required:
> + - gw,mode
> + - reg
> + - label
> +
> + required:
> + - compatible
> + - "#address-cells"
> + - "#size-cells"
> +
> + fan-controller:
> + type: object
> + description: Optional FAN controller
> +
> + properties:
> + compatible:
> + const: gw,gsc-fan
> +
> + reg:
> + description: The fan controller base address
> + maxItems: 1
> +
> + required:
> + - compatible
> + - reg
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-controller
> + - "#interrupt-cells"
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 { /* A0: Board Temperature */
> + reg = <0x00>;
> + label = "temp";
> + gw,mode = <0>;
> + };
> +
> + channel@2 { /* A1: Input Voltage (raw ADC) */
> + reg = <0x02>;
> + label = "vdd_vin";
> + gw,mode = <1>;
> + gw,voltage-divider-ohms = <22100 1000>;
> + gw,voltage-offset-microvolt = <800000>;
> + };
> +
> + channel@b { /* A2: Battery voltage */
> + reg = <0x0b>;
> + label = "vdd_bat";
> + gw,mode = <1>;
> + };
> + };
> +
> + fan-controller {

fan-controller@2c

(and the schema will need to be changed either to the above or a
pattern)

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

> + compatible = "gw,gsc-fan";
> + reg = <0x2c>;
> + };
> + };
> + };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-03-26 20:14    [W:0.090 / U:11.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site