lkml.org 
[lkml]   [2020]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] drm/vc4: Fix HDMI mode validation
From
Date
Am 26.03.20 um 18:19 schrieb Stefan Wahren:
> Am 26.03.20 um 13:20 schrieb Nicolas Saenz Julienne:
>> Current mode validation impedes setting up some video modes which should
>> be supported otherwise. Namely 1920x1200@60Hz.
>>
>> Fix this by lowering the minimum HDMI state machine clock to pixel clock
>> ratio allowed.
>>
>> Fixes: 32e823c63e90 ("drm/vc4: Reject HDMI modes with too high of clocks")
>> Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
>> Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>> ---
>> drivers/gpu/drm/vc4/vc4_hdmi.c | 20 ++++++++++++++++----
>> 1 file changed, 16 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
>> index cea18dc15f77..340719238753 100644
>> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
>> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
>> @@ -681,11 +681,23 @@ static enum drm_mode_status
>> vc4_hdmi_encoder_mode_valid(struct drm_encoder *crtc,
>> const struct drm_display_mode *mode)
>> {
>> - /* HSM clock must be 108% of the pixel clock. Additionally,
>> - * the AXI clock needs to be at least 25% of pixel clock, but
>> - * HSM ends up being the limiting factor.
>> + /*
>> + * As stated in RPi's vc4 firmware "HDMI state machine (HSM) clock must
>> + * be faster than pixel clock, infinitesimally faster, tested in
>> + * simulation. Otherwise, exact value is unimportant for HDMI
>> + * operation." This conflicts with bcm2835's vc4 documentation, which
>> + * states HSM's clock has to be at least 108% of the pixel clock.
>> + *
>> + * Real life tests reveal that vc4's firmware statement holds up, and
>> + * users are able to use pixel clocks closer to HSM's, namely for
>> + * 1920x1200@60Hz. So it was decided to have leave a 1% margin between
>> + * both clocks. Which, for RPi0-3 implies a maximum pixel clock of
> s/RPi0-3/bcm2835/ ?
>
> Beside this nit:
>
> Tested-by: Stefan Wahren <stefan.wahre@i2se.com>
>
> Thanks

Sorry typo in the mail address:

stefan.wahren@i2se.com

\
 
 \ /
  Last update: 2020-03-26 18:23    [W:0.087 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site