lkml.org 
[lkml]   [2020]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] swiotlb: Allow swiotlb to live at pre-defined address
Date
The swiotlb is a very convenient fallback mechanism for bounce buffering of
DMAable data. It is usually used for the compatibility case where devices
can only DMA to a "low region".

However, in some scenarios this "low region" may be bound even more
heavily. For example, there are embedded system where only an SRAM region
is shared between device and CPU. There are also heterogeneous computing
scenarios where only a subset of RAM is cache coherent between the
components of the system. There are partitioning hypervisors, where
a "control VM" that implements device emulation has limited view into a
partition's memory for DMA capabilities due to safety concerns.

This patch adds a command line driven mechanism to move all DMA memory into
a predefined shared memory region which may or may not be part of the
physical address layout of the Operating System.

Ideally, the typical path to set this configuration would be through Device
Tree or ACPI, but neither of the two mechanisms is standardized yet. Also,
in the x86 MicroVM use case, we have neither ACPI nor Device Tree, but
instead configure the system purely through kernel command line options.

I'm sure other people will find the functionality useful going forward
though and extend it to be triggered by DT/ACPI in the future.

Signed-off-by: Alexander Graf <graf@amazon.com>
---
Documentation/admin-guide/kernel-parameters.txt | 3 +-
Documentation/x86/x86_64/boot-options.rst | 4 ++-
kernel/dma/swiotlb.c | 46 +++++++++++++++++++++++--
3 files changed, 49 insertions(+), 4 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index c07815d230bc..d085d55c3cbe 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4785,11 +4785,12 @@
it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst)

swiotlb= [ARM,IA-64,PPC,MIPS,X86]
- Format: { <int> | force | noforce }
+ Format: { <int> | force | noforce | addr=<phys addr> }
<int> -- Number of I/O TLB slabs
force -- force using of bounce buffers even if they
wouldn't be automatically used by the kernel
noforce -- Never use bounce buffers (for debugging)
+ addr=<phys addr> -- Try to allocate SWIOTLB at defined address

switches= [HW,M68k]

diff --git a/Documentation/x86/x86_64/boot-options.rst b/Documentation/x86/x86_64/boot-options.rst
index 2b98efb5ba7f..ca46c57b68c9 100644
--- a/Documentation/x86/x86_64/boot-options.rst
+++ b/Documentation/x86/x86_64/boot-options.rst
@@ -297,11 +297,13 @@ iommu options only relevant to the AMD GART hardware IOMMU:
iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU
implementation:

- swiotlb=<pages>[,force]
+ swiotlb=<pages>[,force][,addr=<phys addr>]
<pages>
Prereserve that many 128K pages for the software IO bounce buffering.
force
Force all IO through the software TLB.
+ addr=<phys addr>
+ Try to allocate SWIOTLB at defined address

Settings for the IBM Calgary hardware IOMMU currently found in IBM
pSeries and xSeries machines
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index c19379fabd20..83da0caa2f93 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -46,6 +46,7 @@
#include <linux/init.h>
#include <linux/memblock.h>
#include <linux/iommu-helper.h>
+#include <linux/io.h>

#define CREATE_TRACE_POINTS
#include <trace/events/swiotlb.h>
@@ -102,6 +103,12 @@ unsigned int max_segment;
#define INVALID_PHYS_ADDR (~(phys_addr_t)0)
static phys_addr_t *io_tlb_orig_addr;

+/*
+ * The TLB phys addr may be defined on the command line. Store it here if it is.
+ */
+static phys_addr_t io_tlb_addr = INVALID_PHYS_ADDR;
+
+
/*
* Protect the above data structures in the map and unmap calls
*/
@@ -119,11 +126,23 @@ setup_io_tlb_npages(char *str)
}
if (*str == ',')
++str;
- if (!strcmp(str, "force")) {
+ if (!strncmp(str, "force", 5)) {
swiotlb_force = SWIOTLB_FORCE;
- } else if (!strcmp(str, "noforce")) {
+ str += 5;
+ } else if (!strncmp(str, "noforce", 7)) {
swiotlb_force = SWIOTLB_NO_FORCE;
io_tlb_nslabs = 1;
+ str += 7;
+ }
+
+ if (*str == ',')
+ ++str;
+ if (!strncmp(str, "addr=", 5)) {
+ char *addrstr = str + 5;
+
+ io_tlb_addr = kstrtoul(addrstr, 0, &str);
+ if (addrstr == str)
+ io_tlb_addr = INVALID_PHYS_ADDR;
}

return 0;
@@ -239,6 +258,25 @@ int __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
return 0;
}

+static int __init swiotlb_init_io(int verbose, unsigned long bytes)
+{
+ unsigned __iomem char *vstart;
+
+ if (io_tlb_addr == INVALID_PHYS_ADDR)
+ return -EINVAL;
+
+ vstart = memremap(io_tlb_addr, bytes, MEMREMAP_WB);
+ if (!vstart)
+ return -EINVAL;
+
+ if (swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose)) {
+ memunmap(vstart);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/*
* Statically reserve bounce buffer space and initialize bounce buffer data
* structures for the software IO TLB used to implement the DMA API.
@@ -257,6 +295,10 @@ swiotlb_init(int verbose)

bytes = io_tlb_nslabs << IO_TLB_SHIFT;

+ /* Map IO TLB from device memory */
+ if (!swiotlb_init_io(verbose, bytes))
+ return;
+
/* Get IO TLB memory from the low pages */
vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
--
2.16.4



Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Jonathan Weiss
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879



\
 
 \ /
  Last update: 2020-03-26 17:30    [W:0.079 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site