lkml.org 
[lkml]   [2020]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: lockdep warning in urb.c:363 usb_submit_urb
On 03/24/20 15:22, Alan Stern wrote:
> On Tue, 24 Mar 2020, Qais Yousef wrote:
>
> > On 03/24/20 11:56, Alan Stern wrote:
>
> > > This certainly reinforces the initial impression that the cause of the
> > > warnings is a bug in the platform code. You should ask the appropriate
> > > maintainer.
> >
> > The device-tree compatible node returns "generic-ohci".
> > drivers/usb/host/ohci-platform.c returns you as the maintainer :-)
>
> I'm the maintainer of the driver for the device. But the device
> structure itself (the one named 7ffb0000.ohci) gets created by
> device-tree -- that's what I was referring to.
>
> Here's the first error message:
>
> usb usb2: runtime PM trying to activate child device usb2 but parent (7ffb0000.ohci) is not active
>
> The runtime PM status of 7ffb0000.ohci is set in ohci_platform_probe(),
> which does:
>
> pm_runtime_set_active(&dev->dev);
>
> The runtime PM status can change, and there aren't any debugging
> statements in ohci_platform_suspend() or ohci_platform_resume() (or
> ohci_suspend()/ohci_resume() in ohci-hcd.c, for that matter). Maybe
> you can add some so we can see if anything strange is going on.
>
> Any maybe you can find out exactly where that error message is coming
> from by calling dump_stack() immediately after the dev_err() line
> (approximately line 1198 in drivers/base/power/runtime.c).
>
> (Also, you might want to turn off rcutorture. It adds a lot of
> messages to the system log that are irrelevant for our purposes.)

Thanks for all the hints Alan.

I think I figured it out, the below patch seems to fix it for me. Looking
at other drivers resume functions it seems we're missing the
pm_runtime_disable()->set_active()->enable() dance. Doing that fixes the
warning and the dev_err() in driver/base/power.

I don't see xhci-plat.c doing that, I wonder if it needs it too.

I'm not well versed about the details and the rules here. So my fix could be
a hack, though it does seem the right thing to do.

I wonder why the power core doesn't handle this transparently..

Requested dmesg is attached too.


diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 7addfc2cbadc..eb92c8092fae 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -299,6 +299,10 @@ static int ohci_platform_resume(struct device *dev)
}

ohci_resume(hcd, false);
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
return 0;
}
#endif /* CONFIG_PM_SLEEP */

Thanks

--
Qais Yousef
[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x410fd033]
[ 0.000000] Linux version 5.6.0-rc6-00002-gdfd1731f9a3e-dirty (qyousef@e107158-lin) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)) #545 SMP PREEMPT Wed Mar 25 14:16:10 GMT 2020
[ 0.000000] Machine model: ARM Juno development board (r2)
[ 0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '')
[ 0.000000] printk: bootconsole [pl11] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fd000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000009ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x9fefdb000-0x9fefdcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000feffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000009ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff]
[ 0.000000] On node 0 totalpages: 2093056
[ 0.000000] DMA zone: 4096 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 262144 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 4096 pages used for memmap
[ 0.000000] DMA32 zone: 258048 pages, LIFO batch:63
[ 0.000000] Normal zone: 24576 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 48 pages/cpu s158536 r8192 d29880 u196608
[ 0.000000] pcpu-alloc: s158536 r8192 d29880 u196608 alloc=48*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2060288
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ttyAMA0,115200n8 root=/dev/nfs rw verbose debug ip=dhcp nfsroot=xx.xx.xx.xx:/mnt/data/exports/juno,vers=4,tcp nfsrootdebug rootwait earlycon=pl011,0x7ff80000 systemd.log_target=null user_debug=31 androidboot.hardware=juno loglevel=9 bootargs_sky2=sky2.mac_address=0x00,0x02,0xf7,0x00,0x67,0xbe
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[ 0.000000] Memory: 8044524K/8372224K available (25660K kernel code, 4120K rwdata, 12216K rodata, 14656K init, 11183K bss, 294932K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] ftrace: allocating 77520 entries in 303 pages
[ 0.000000] ftrace: allocated 303 pages with 6 groups
[ 0.000000] Running RCU self tests
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU lockdep checking is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv2m: range[mem 0x2c1c0000-0x2c1cffff], SPI[224:255]
[ 0.000000] GICv2m: range[mem 0x2c1d0000-0x2c1dffff], SPI[256:287]
[ 0.000000] GICv2m: range[mem 0x2c1e0000-0x2c1effff], SPI[288:319]
[ 0.000000] GICv2m: range[mem 0x2c1f0000-0x2c1fffff], SPI[320:351]
[ 0.000000] random: get_random_bytes called from start_kernel+0x5d8/0x784 with crng_init=0
[ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.008557] Failed to initialize '/smb@8000000/motherboard/iofpga@3,00000000/timer@120000': -22
[ 0.018103] arch_timer: cp15 and mmio timer(s) running at 50.00MHz (phys/phys).
[ 0.025447] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[ 0.036276] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[ 0.045517] Console: colour dummy device 80x25
[ 0.050050] printk: console [tty0] enabled
[ 0.054295] printk: bootconsole [pl11] disabled
[ 0.058992] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.059159] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.059260] ... MAX_LOCK_DEPTH: 48
[ 0.059361] ... MAX_LOCKDEP_KEYS: 8192
[ 0.059465] ... CLASSHASH_SIZE: 4096
[ 0.059570] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.059676] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.059782] ... CHAINHASH_SIZE: 32768
[ 0.059887] memory used by lock dependency info: 6237 kB
[ 0.060010] memory used for stack traces: 4224 kB
[ 0.060122] per task-struct memory footprint: 1920 bytes
[ 0.060244] ------------------------
[ 0.060334] | Locking API testsuite:
[ 0.060424] ----------------------------------------------------------------------------
[ 0.060596] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.060767] --------------------------------------------------------------------------
[ 0.060946] A-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.079440] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.099547] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.121354] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.143126] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.166625] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.190062] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.213553] double unlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.231966] initialize held: ok | ok | ok | ok | ok | ok | ok |
[ 0.249767] --------------------------------------------------------------------------
[ 0.249937] recursive read-lock: | ok | | ok |
[ 0.255564] recursive read-lock #2: | ok | | ok |
[ 0.260970] mixed read-write-lock: | ok | | ok |
[ 0.266382] mixed write-read-lock: | ok | | ok |
[ 0.271793] mixed read-lock/lock-write ABBA: |FAILED| | ok |
[ 0.277515] mixed read-lock/lock-read ABBA: | ok | | ok |
[ 0.283397] mixed write-lock/lock-write ABBA: | ok | | ok |
[ 0.289274] --------------------------------------------------------------------------
[ 0.289605] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.297567] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.305563] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.313516] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.321520] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.329488] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.337502] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.345458] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.353477] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.361441] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.369453] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.378116] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.386824] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.395480] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.404183] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.412842] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.421545] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.430196] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.438895] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.447085] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.455316] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.463973] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.472673] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.481336] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.490034] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.498693] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.507410] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.516066] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.524770] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.533425] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.542130] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.550787] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.559501] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.568163] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.576870] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.585537] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.594252] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.602905] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.611620] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.620272] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.628982] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.637635] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.646346] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.655006] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.663718] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.672361] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.681063] hard-irq read-recursion/123: ok |
[ 0.684017] soft-irq read-recursion/123: ok |
[ 0.687014] hard-irq read-recursion/132: ok |
[ 0.689967] soft-irq read-recursion/132: ok |
[ 0.692963] hard-irq read-recursion/213: ok |
[ 0.695917] soft-irq read-recursion/213: ok |
[ 0.698910] hard-irq read-recursion/231: ok |
[ 0.701862] soft-irq read-recursion/231: ok |
[ 0.704861] hard-irq read-recursion/312: ok |
[ 0.707814] soft-irq read-recursion/312: ok |
[ 0.710809] hard-irq read-recursion/321: ok |
[ 0.713763] soft-irq read-recursion/321: ok |
[ 0.716757] --------------------------------------------------------------------------
[ 0.716927] | Wound/wait tests |
[ 0.717014] ---------------------
[ 0.717102] ww api failures: ok | ok | ok |
[ 0.725588] ww contexts mixing: ok | ok |
[ 0.731180] finishing ww context: ok | ok | ok | ok |
[ 0.742246] locking mismatches: ok | ok | ok |
[ 0.750716] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.779593] spinlock nest unlocked: ok |
[ 0.782307] -----------------------------------------------------
[ 0.782442] |block | try |context|
[ 0.782577] -----------------------------------------------------
[ 0.782711] context: ok | ok | ok |
[ 0.791429] try: ok | ok | ok |
[ 0.799631] block: ok | ok | ok |
[ 0.807872] spinlock: ok | ok | ok |
[ 0.816791] -------------------------------------------------------
[ 0.816927] Good, all 261 testcases passed! |
[ 0.817029] ---------------------------------
[ 0.817366] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
[ 0.817640] pid_max: default: 32768 minimum: 301
[ 0.818117] LSM: Security Framework initializing
[ 0.818411] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.818617] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.854086] rcu: Hierarchical SRCU implementation.
[ 0.871249] EFI services will not be available.
[ 0.878379] smp: Bringing up secondary CPUs ...
[ 0.924476] CPU features: detected: EL2 vector hardening
[ 0.924488] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.924496] CPU features: detected: ARM erratum 1319367
[ 0.924502] Detected PIPT I-cache on CPU1
[ 0.924565] CPU1: Booted secondary processor 0x0000000000 [0x410fd080]
[ 0.968768] Detected PIPT I-cache on CPU2
[ 0.968804] CPU2: Booted secondary processor 0x0000000001 [0x410fd080]
[ 1.013229] Detected VIPT I-cache on CPU3
[ 1.013300] CPU3: Booted secondary processor 0x0000000101 [0x410fd033]
[ 1.057633] Detected VIPT I-cache on CPU4
[ 1.057692] CPU4: Booted secondary processor 0x0000000102 [0x410fd033]
[ 1.102062] Detected VIPT I-cache on CPU5
[ 1.102119] CPU5: Booted secondary processor 0x0000000103 [0x410fd033]
[ 1.102748] smp: Brought up 1 node, 6 CPUs
[ 1.104412] SMP: Total of 6 processors activated.
[ 1.104635] CPU features: detected: 32-bit EL0 Support
[ 1.104773] CPU features: detected: CRC32 instructions
[ 1.168392] CPU: All CPU(s) started at EL2
[ 1.168658] alternatives: patching kernel code
[ 1.173720] devtmpfs: initialized
[ 1.193388] KASLR disabled due to lack of seed
[ 1.195550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 1.195672] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
[ 1.197239] xor: measuring software checksum speed
[ 1.234111] 8regs : 4239.000 MB/sec
[ 1.274329] 32regs : 4763.000 MB/sec
[ 1.314588] arm64_neon: 4422.000 MB/sec
[ 1.314642] xor: using function: 32regs (4763.000 MB/sec)
[ 1.314711] pinctrl core: initialized pinctrl subsystem
[ 1.317493] thermal_sys: Registered thermal governor 'step_wise'
[ 1.317499] thermal_sys: Registered thermal governor 'power_allocator'
[ 1.319214] DMI not present or invalid.
[ 1.320478] NET: Registered protocol family 16
[ 1.324609] DMA: preallocated 256 KiB pool for atomic allocations
[ 1.324694] audit: initializing netlink subsys (disabled)
[ 1.325236] audit: type=2000 audit(1.044:1): state=initialized audit_enabled=0 res=1
[ 1.327342] cpuidle: using governor menu
[ 1.327610] NET: Registered protocol family 42
[ 1.328197] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 1.328700] ASID allocator initialised with 65536 entries
[ 1.330723] Serial: AMBA PL011 UART driver
[ 1.360582] 7ff80000.uart: ttyAMA0 at MMIO 0x7ff80000 (irq = 31, base_baud = 0) is a PL011 rev3
[ 2.798170] printk: console [ttyAMA0] enabled
[ 2.862142] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 2.869034] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 2.875841] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 2.882657] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 2.916023] cryptd: max_cpu_qlen set to 1000
[ 3.017580] raid6: neonx8 gen() 3109 MB/s
[ 3.090046] raid6: neonx8 xor() 2105 MB/s
[ 3.162564] raid6: neonx4 gen() 3115 MB/s
[ 3.234985] raid6: neonx4 xor() 2169 MB/s
[ 3.307454] raid6: neonx2 gen() 2693 MB/s
[ 3.379910] raid6: neonx2 xor() 2010 MB/s
[ 3.452380] raid6: neonx1 gen() 1993 MB/s
[ 3.524838] raid6: neonx1 xor() 1589 MB/s
[ 3.597305] raid6: int64x8 gen() 1567 MB/s
[ 3.669756] raid6: int64x8 xor() 889 MB/s
[ 3.742226] raid6: int64x4 gen() 1815 MB/s
[ 3.814687] raid6: int64x4 xor() 958 MB/s
[ 3.887140] raid6: int64x2 gen() 1601 MB/s
[ 3.959610] raid6: int64x2 xor() 839 MB/s
[ 4.032067] raid6: int64x1 gen() 1222 MB/s
[ 4.104533] raid6: int64x1 xor() 631 MB/s
[ 4.108935] raid6: using algorithm neonx4 gen() 3115 MB/s
[ 4.114420] raid6: .... xor() 2169 MB/s, rmw enabled
[ 4.119466] raid6: using neon recovery algorithm
[ 4.125047] ACPI: Interpreter disabled.
[ 4.131906] iommu: Default domain type: Translated
[ 4.137540] vgaarb: loaded
[ 4.141299] SCSI subsystem initialized
[ 4.145645] libata version 3.00 loaded.
[ 4.150204] usbcore: registered new interface driver usbfs
[ 4.155912] usbcore: registered new interface driver hub
[ 4.161514] usbcore: registered new device driver usb
[ 4.169580] mc: Linux media interface: v0.10
[ 4.174009] videodev: Linux video capture interface: v2.00
[ 4.179858] pps_core: LinuxPPS API ver. 1 registered
[ 4.184911] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.194206] PTP clock support registered
[ 4.199016] EDAC MC: Ver: 3.0.0
[ 4.204950] FPGA manager framework
[ 4.208929] Advanced Linux Sound Architecture Driver Initialized.
[ 4.216504] Bluetooth: Core ver 2.22
[ 4.220219] NET: Registered protocol family 31
[ 4.224747] Bluetooth: HCI device and connection manager initialized
[ 4.231233] Bluetooth: HCI socket layer initialized
[ 4.236207] Bluetooth: L2CAP socket layer initialized
[ 4.241403] Bluetooth: SCO socket layer initialized
[ 4.247908] clocksource: Switched to clocksource arch_sys_counter
[ 5.092304] VFS: Disk quotas dquot_6.6.0
[ 5.096486] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.104257] pnp: PnP ACPI: disabled
[ 5.126899] NET: Registered protocol family 2
[ 5.132268] tcp_listen_portaddr_hash hash table entries: 4096 (order: 6, 294912 bytes, linear)
[ 5.141703] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 5.150017] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[ 5.168454] TCP: Hash tables configured (established 65536 bind 65536)
[ 5.175673] UDP hash table entries: 4096 (order: 7, 655360 bytes, linear)
[ 5.184143] UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes, linear)
[ 5.193203] NET: Registered protocol family 1
[ 5.199434] RPC: Registered named UNIX socket transport module.
[ 5.205500] RPC: Registered udp transport module.
[ 5.210304] RPC: Registered tcp transport module.
[ 5.215105] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.222684] PCI: CLS 0 bytes, default 64
[ 6.577624] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 6.587298] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 6.595760] kvm [1]: IPA Size Limit: 40bits
[ 6.608906] kvm [1]: vgic interrupt IRQ1
[ 6.613502] kvm [1]: Hyp mode initialized successfully
[ 7.080099] Initialise system trusted keyrings
[ 7.085057] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 7.120549] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 7.129076] NFS: Registering the id_resolver key type
[ 7.134304] Key type id_resolver registered
[ 7.138597] Key type id_legacy registered
[ 7.142713] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 7.149953] fuse: init (API version 7.31)
[ 7.155477] 9p: Installing v9fs 9p2000 file system support
[ 7.183946] Key type asymmetric registered
[ 7.188171] Asymmetric key parser 'x509' registered
[ 7.193229] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 7.200782] io scheduler mq-deadline registered
[ 7.205432] io scheduler kyber registered
[ 7.225296] pl061_gpio 1c1d0000.gpio: PL061 GPIO chip registered
[ 7.235193] pci-host-generic 40000000.pcie: host bridge /pcie@40000000 ranges:
[ 7.242600] pci-host-generic 40000000.pcie: IO 0x005f800000..0x005fffffff -> 0x0000000000
[ 7.251513] pci-host-generic 40000000.pcie: MEM 0x0050000000..0x0057ffffff -> 0x0050000000
[ 7.260389] pci-host-generic 40000000.pcie: MEM 0x4000000000..0x40ffffffff -> 0x4000000000
[ 7.269326] pci-host-generic 40000000.pcie: ECAM at [mem 0x40000000-0x4fffffff] for [bus 00-ff]
[ 7.278527] pci-host-generic 40000000.pcie: PCI host bridge to bus 0000:00
[ 7.285533] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 7.291123] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff]
[ 7.297590] pci_bus 0000:00: root bus resource [mem 0x50000000-0x57ffffff]
[ 7.304582] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x40ffffffff pref]
[ 7.312464] pci 0000:00:00.0: [1556:1100] type 01 class 0x060400
[ 7.318635] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit pref]
[ 7.326164] pci 0000:00:00.0: supports D1 D2
[ 7.330525] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7.339261] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.347697] pci 0000:01:00.0: [111d:8090] type 01 class 0x060400
[ 7.353962] pci 0000:01:00.0: enabling Extended Tags
[ 7.359209] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 7.377317] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.385860] pci 0000:02:01.0: [111d:8090] type 01 class 0x060400
[ 7.392141] pci 0000:02:01.0: enabling Extended Tags
[ 7.397415] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 7.404279] pci 0000:02:02.0: [111d:8090] type 01 class 0x060400
[ 7.410549] pci 0000:02:02.0: enabling Extended Tags
[ 7.415822] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 7.422643] pci 0000:02:03.0: [111d:8090] type 01 class 0x060400
[ 7.428912] pci 0000:02:03.0: enabling Extended Tags
[ 7.434185] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 7.441395] pci 0000:02:0c.0: [111d:8090] type 01 class 0x060400
[ 7.447666] pci 0000:02:0c.0: enabling Extended Tags
[ 7.452938] pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold
[ 7.459931] pci 0000:02:10.0: [111d:8090] type 01 class 0x060400
[ 7.466186] pci 0000:02:10.0: enabling Extended Tags
[ 7.471444] pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
[ 7.478879] pci 0000:02:1f.0: [111d:8090] type 01 class 0x060400
[ 7.485150] pci 0000:02:1f.0: enabling Extended Tags
[ 7.490430] pci 0000:02:1f.0: PME# supported from D0 D3hot D3cold
[ 7.497230] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.505402] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.513562] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.521720] pci 0000:02:0c.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.529877] pci 0000:02:10.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.538035] pci 0000:02:1f.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.546502] pci 0000:03:00.0: [1095:3132] type 00 class 0x018000
[ 7.552696] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit]
[ 7.559637] pci 0000:03:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit]
[ 7.566562] pci 0000:03:00.0: reg 0x20: [io 0x0000-0x007f]
[ 7.572276] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 7.579263] pci 0000:03:00.0: supports D1 D2
[ 7.584131] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 7.595613] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 7.603920] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 7.612230] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 7.620534] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[ 7.628842] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[ 7.635950] pci 0000:08:00.0: [11ab:4380] type 00 class 0x020000
[ 7.642138] pci 0000:08:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 7.649063] pci 0000:08:00.0: reg 0x18: [io 0x0000-0x00ff]
[ 7.654979] pci 0000:08:00.0: supports D1 D2
[ 7.659341] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7.668084] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
[ 7.674828] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 08
[ 7.681569] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 08
[ 7.688330] pci 0000:00:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[ 7.695330] pci 0000:00:00.0: BAR 0: assigned [mem 0x4000000000-0x4000003fff 64bit pref]
[ 7.703581] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 7.709886] pci 0000:01:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[ 7.716883] pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 7.723190] pci 0000:02:01.0: BAR 14: assigned [mem 0x50000000-0x500fffff]
[ 7.730187] pci 0000:02:1f.0: BAR 14: assigned [mem 0x50100000-0x501fffff]
[ 7.737183] pci 0000:02:01.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 7.743477] pci 0000:02:1f.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 7.749786] pci 0000:03:00.0: BAR 6: assigned [mem 0x50000000-0x5007ffff pref]
[ 7.757139] pci 0000:03:00.0: BAR 2: assigned [mem 0x50080000-0x50083fff 64bit]
[ 7.764614] pci 0000:03:00.0: BAR 0: assigned [mem 0x50084000-0x5008407f 64bit]
[ 7.772078] pci 0000:03:00.0: BAR 4: assigned [io 0x1000-0x107f]
[ 7.778296] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 7.783364] pci 0000:02:01.0: bridge window [io 0x1000-0x1fff]
[ 7.789580] pci 0000:02:01.0: bridge window [mem 0x50000000-0x500fffff]
[ 7.796509] pci 0000:02:02.0: PCI bridge to [bus 04]
[ 7.801605] pci 0000:02:03.0: PCI bridge to [bus 05]
[ 7.806701] pci 0000:02:0c.0: PCI bridge to [bus 06]
[ 7.811797] pci 0000:02:10.0: PCI bridge to [bus 07]
[ 7.816902] pci 0000:08:00.0: BAR 0: assigned [mem 0x50100000-0x50103fff 64bit]
[ 7.824363] pci 0000:08:00.0: BAR 2: assigned [io 0x2000-0x20ff]
[ 7.830578] pci 0000:02:1f.0: PCI bridge to [bus 08]
[ 7.835644] pci 0000:02:1f.0: bridge window [io 0x2000-0x2fff]
[ 7.841859] pci 0000:02:1f.0: bridge window [mem 0x50100000-0x501fffff]
[ 7.848787] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[ 7.854116] pci 0000:01:00.0: bridge window [io 0x1000-0x2fff]
[ 7.860331] pci 0000:01:00.0: bridge window [mem 0x50000000-0x501fffff]
[ 7.867259] pci 0000:00:00.0: PCI bridge to [bus 01-08]
[ 7.872593] pci 0000:00:00.0: bridge window [io 0x1000-0x2fff]
[ 7.878802] pci 0000:00:00.0: bridge window [mem 0x50000000-0x501fffff]
[ 7.886081] pcieport 0000:00:00.0: enabling device (0000 -> 0003)
[ 7.900350] pcieport 0000:00:00.0: PME: Signaling with IRQ 44
[ 7.907274] pcieport 0000:00:00.0: AER: enabled with IRQ 44
[ 7.913552] pcieport 0000:01:00.0: enabling device (0000 -> 0003)
[ 7.920030] pcieport 0000:02:01.0: enabling device (0000 -> 0003)
[ 7.930863] pcieport 0000:02:1f.0: enabling device (0000 -> 0003)
[ 7.940840] IPMI message handler: version 39.2
[ 7.945556] ipmi device interface
[ 7.949078] ipmi_si: IPMI System Interface driver
[ 7.954515] ipmi_si: Unable to find any System Interface(s)
[ 7.961434] EINJ: ACPI disabled.
[ 7.974192] dma-pl330 7ff00000.dma: WARN: Device release is not defined so it is not safe to unbind this driver while in use
[ 7.986948] dma-pl330 7ff00000.dma: Loaded driver for PL330 DMAC-341330
[ 7.993684] dma-pl330 7ff00000.dma: DBUFF-1024x16bytes Num_Chans-8 Num_Peri-8 Num_Events-8
[ 8.018275] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 8.029986] SuperH (H)SCI(F) driver initialized
[ 8.035328] msm_serial: driver initialized
[ 8.043194] arm-smmu 7fb10000.iommu: probing hardware configuration...
[ 8.049858] arm-smmu 7fb10000.iommu: SMMUv1 with:
[ 8.054660] arm-smmu 7fb10000.iommu: stage 2 translation
[ 8.060164] arm-smmu 7fb10000.iommu: non-coherent table walk
[ 8.066016] arm-smmu 7fb10000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 8.073545] arm-smmu 7fb10000.iommu: stream matching with 2 register groups
[ 8.080722] arm-smmu 7fb10000.iommu: 1 context banks (1 stage-2 only)
[ 8.087371] arm-smmu 7fb10000.iommu: Supported page sizes: 0x60211000
[ 8.094016] arm-smmu 7fb10000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 8.101582] arm-smmu 7fb20000.iommu: probing hardware configuration...
[ 8.108298] arm-smmu 7fb20000.iommu: SMMUv1 with:
[ 8.113100] arm-smmu 7fb20000.iommu: stage 2 translation
[ 8.118604] arm-smmu 7fb20000.iommu: non-coherent table walk
[ 8.124456] arm-smmu 7fb20000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 8.131985] arm-smmu 7fb20000.iommu: stream matching with 2 register groups
[ 8.139162] arm-smmu 7fb20000.iommu: 1 context banks (1 stage-2 only)
[ 8.145821] arm-smmu 7fb20000.iommu: Supported page sizes: 0x60211000
[ 8.152466] arm-smmu 7fb20000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 8.159610] arm-smmu 7fb30000.iommu: probing hardware configuration...
[ 8.166260] arm-smmu 7fb30000.iommu: SMMUv1 with:
[ 8.171060] arm-smmu 7fb30000.iommu: stage 2 translation
[ 8.176562] arm-smmu 7fb30000.iommu: coherent table walk
[ 8.182068] arm-smmu 7fb30000.iommu: stream matching with 2 register groups
[ 8.189242] arm-smmu 7fb30000.iommu: 1 context banks (1 stage-2 only)
[ 8.195967] arm-smmu 7fb30000.iommu: Supported page sizes: 0x60211000
[ 8.202613] arm-smmu 7fb30000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 8.347541] tda998x 0-0070: found TDA19988
[ 8.476376] tda998x 0-0071: found TDA19988
[ 8.547034] loop: module loaded
[ 8.673238] mpt3sas version 33.100.00.00 loaded
[ 8.682167] sata_sil24 0000:03:00.0: version 1.1
[ 8.686921] sata_sil24 0000:03:00.0: enabling device (0000 -> 0003)
[ 8.696899] scsi host0: sata_sil24
[ 8.701952] scsi host1: sata_sil24
[ 8.705964] ata1: SATA max UDMA/100 host m128@0x50084000 port 0x50080000 irq 51
[ 8.713412] ata2: SATA max UDMA/100 host m128@0x50084000 port 0x50082000 irq 51
[ 8.728534] libphy: Fixed MDIO Bus: probed
[ 8.734961] tun: Universal TUN/TAP device driver, 1.6
[ 8.741517] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36-0 (2014/02/10)
[ 8.751549] thunder_xcv, ver 1.0
[ 8.755013] thunder_bgx, ver 1.0
[ 8.758439] nicpf, ver 1.0
[ 8.762092] hclge is initializing
[ 8.765875] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 8.773260] hns3: Copyright (c) 2017 Huawei Corporation.
[ 8.778842] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 8.784782] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 8.790947] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 8.798024] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 8.803824] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 8.811780] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 8.818521] sky2: driver version 1.30
[ 8.822596] sky2 0000:08:00.0: enabling device (0000 -> 0003)
[ 8.828564] sky2 0000:08:00.0: Yukon-2 UL 2 chip revision 0
[ 8.834357] sky2 0000:08:00.0 (unnamed net_device) (uninitialized): Invalid MAC address, defaulting to random
[ 8.846043] sky2 0000:08:00.0 eth0: addr fe:9a:bd:e5:a7:ff
[ 8.886584] libphy: smsc911x-mdio: probed
[ 8.901994] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 8.909637] usbcore: registered new interface driver pegasus
[ 8.915469] usbcore: registered new interface driver rtl8150
[ 8.921330] usbcore: registered new interface driver r8152
[ 8.926986] usbcore: registered new interface driver lan78xx
[ 8.932837] usbcore: registered new interface driver asix
[ 8.938418] usbcore: registered new interface driver ax88179_178a
[ 8.944688] usbcore: registered new interface driver cdc_ether
[ 8.950686] usbcore: registered new interface driver dm9601
[ 8.956448] usbcore: registered new interface driver CoreChips
[ 8.962492] usbcore: registered new interface driver smsc75xx
[ 8.968474] usbcore: registered new interface driver smsc95xx
[ 8.974386] usbcore: registered new interface driver net1080
[ 8.980208] usbcore: registered new interface driver plusb
[ 8.985862] usbcore: registered new interface driver cdc_subset
[ 8.991964] usbcore: registered new interface driver zaurus
[ 8.997710] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 9.005326] usbcore: registered new interface driver cdc_ncm
[ 9.011485] VFIO - User Level meta-driver version: 0.3
[ 9.020377] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.027057] ehci-pci: EHCI PCI platform driver
[ 9.031695] ehci-platform: EHCI generic platform driver
[ 9.037597] ehci-platform 7ffc0000.ehci: Adding to iommu group 0
[ 9.044283] ehci-platform 7ffc0000.ehci: EHCI Host Controller
[ 9.050291] ehci-platform 7ffc0000.ehci: new USB bus registered, assigned bus number 1
[ 9.058744] ehci-platform 7ffc0000.ehci: irq 34, io mem 0x7ffc0000
[ 9.079967] ehci-platform 7ffc0000.ehci: USB 2.0 started, EHCI 1.00
[ 9.088797] hub 1-0:1.0: USB hub found
[ 9.092798] hub 1-0:1.0: 1 port detected
[ 9.098135] ehci-orion: EHCI orion driver
[ 9.102462] ehci-exynos: EHCI Exynos driver
[ 9.106916] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.113238] ohci-pci: OHCI PCI platform driver
[ 9.117881] ohci-platform: OHCI generic platform driver
[ 9.123495] ohci-platform 7ffb0000.ohci: Adding to iommu group 0
[ 9.129894] ohci-platform 7ffb0000.ohci: Generic Platform OHCI controller
[ 9.136861] ohci-platform 7ffb0000.ohci: new USB bus registered, assigned bus number 2
[ 9.145189] ohci-platform 7ffb0000.ohci: irq 33, io mem 0x7ffb0000
[ 9.230048] hub 2-0:1.0: USB hub found
[ 9.233993] hub 2-0:1.0: 1 port detected
[ 9.239005] ohci-exynos: OHCI Exynos driver
[ 9.244235] usbcore: registered new interface driver usb-storage
[ 9.259192] rtc-pl031 1c170000.rtc: registered as rtc0
[ 9.266003] i2c /dev entries driver
[ 9.275028] usbcore: registered new interface driver uvcvideo
[ 9.280884] USB Video Class driver (1.1.1)
[ 9.285065] gspca_main: v2.14.0 registered
[ 9.296038] sp805-wdt 1c0f0000.wdt: registration successful
[ 9.304583] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 9.313212] Bluetooth: HCI UART driver ver 2.3
[ 9.317746] Bluetooth: HCI UART protocol H4 registered
[ 9.323026] Bluetooth: HCI UART protocol LL registered
[ 9.328441] Bluetooth: HCI UART protocol Broadcom registered
[ 9.334327] usbcore: registered new interface driver btusb
[ 9.342601] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000 irq 9,0 (pio)
[ 9.377097] sdhci: Secure Digital Host Controller Interface driver
[ 9.383545] sdhci: Copyright(c) Pierre Ossman
[ 9.388697] Synopsys Designware Multimedia Card Interface Driver
[ 9.396519] sdhci-pltfm: SDHCI platform and OF driver helper
[ 9.405237] leds-syscon 1c010000.apbregs:led0: registered LED vexpress:0
[ 9.412494] leds-syscon 1c010000.apbregs:led1: registered LED vexpress:1
[ 9.419731] leds-syscon 1c010000.apbregs:led2: registered LED vexpress:2
[ 9.426949] leds-syscon 1c010000.apbregs:led3: registered LED vexpress:3
[ 9.432038] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 9.434150] leds-syscon 1c010000.apbregs:led4: registered LED vexpress:4
[ 9.448228] leds-syscon 1c010000.apbregs:led5: registered LED vexpress:5
[ 9.455450] leds-syscon 1c010000.apbregs:led6: registered LED vexpress:6
[ 9.462677] leds-syscon 1c010000.apbregs:led7: registered LED vexpress:7
[ 9.470608] ledtrig-cpu: registered to indicate activity on CPUs
[ 9.471854] hub 1-1:1.0: USB hub found
[ 9.480403] usbcore: registered new interface driver usbhid
[ 9.481137] hub 1-1:1.0: 4 ports detected
[ 9.486375] usbhid: USB HID core driver
[ 9.487558] mhu 2b1f0000.mhu: ARM MHU Mailbox registered
[ 9.513690] drop_monitor: Initializing network drop monitor service
[ 9.520317] random: fast init done
[ 9.524235] NET: Registered protocol family 10
[ 9.531342] Segment Routing with IPv6
[ 9.535733] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 9.542881] NET: Registered protocol family 17
[ 9.547631] Bridge firewalling registered
[ 9.551728] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 9.557760] Bluetooth: HIDP socket layer initialized
[ 9.562911] 8021q: 802.1Q VLAN Support v1.8
[ 9.567556] 9pnet: Installing 9P2000 support
[ 9.572093] Key type dns_resolver registered
[ 9.577890] registered taskstats version 1
[ 9.582110] Loading compiled-in X.509 certificates
[ 9.590285] Btrfs loaded, crc32c=crc32c-generic
[ 9.606480] scpi_protocol scpi: SCP Protocol 1.2 Firmware 1.21.0 version
[ 9.667669] arm-smmu 2b600000.iommu: probing hardware configuration...
[ 9.674460] arm-smmu 2b600000.iommu: SMMUv1 with:
[ 9.679337] arm-smmu 2b600000.iommu: stage 2 translation
[ 9.684895] arm-smmu 2b600000.iommu: coherent table walk
[ 9.690397] arm-smmu 2b600000.iommu: stream matching with 2 register groups
[ 9.697574] arm-smmu 2b600000.iommu: 1 context banks (1 stage-2 only)
[ 9.704214] arm-smmu 2b600000.iommu: Supported page sizes: 0x60211000
[ 9.710849] arm-smmu 2b600000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 9.720694] input: smb@8000000:motherboard:gpio-keys as /devices/platform/smb@8000000/smb@8000000:motherboard/smb@8000000:motherboard:gpio-keys/input/input1
[ 9.737183] rtc-pl031 1c170000.rtc: setting system clock to 2020-03-25T14:11:59 UTC (1585145519)
[ 10.060137] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[ 10.105383] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 10.119740] scsi host2: usb-storage 1-1.1:1.0
[ 10.280188] atkbd serio0: keyboard reset failed on 1c060000.kmi
[ 10.780087] ata1: SATA link down (SStatus 0 SControl 0)
[ 11.150232] scsi 2:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 6
[ 11.163134] sd 2:0:0:0: [sda] 30253056 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 11.172288] sd 2:0:0:0: [sda] Write Protect is off
[ 11.177604] sd 2:0:0:0: [sda] Mode Sense: 45 00 00 00
[ 11.184331] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 11.264921] sda: sda1 sda2
[ 11.293352] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 11.528536] atkbd serio1: keyboard reset failed on 1c070000.kmi
[ 12.836137] ata2: SATA link down (SStatus 0 SControl 0)
[ 12.849154] sky2 0000:08:00.0 eth0: enabling interface
[ 12.855704] Generic PHY 18000000.ethernet-ffffffff:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=18000000.ethernet-ffffffff:01, irq=POLL)
[ 12.880247] smsc911x 18000000.ethernet eth1: SMSC911x/921x identified at 0xffff800018cb0000, IRQ: 8
[ 14.928231] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 14.948102] Sending DHCP requests ., OK
[ 15.068128] ALSA device list:
[ 15.071357] No soundcards found.
[ 15.076585] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 15.085596] uart-pl011 7ff80000.uart: no DMA platform data
[ 15.091359] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 15.120243] Freeing unused kernel memory: 14656K
[ 15.128168] Run /init as init process
[ 15.131870] with arguments:
[ 15.134909] /init
[ 15.137239] ttyAMA0,115200n8
[ 15.140526] verbose
[ 15.142998] nfsrootdebug
[ 15.145933] with environment:
[ 15.149131] HOME=/
[ 15.151515] TERM=linux
[ 15.154273] user_debug=31
[ 15.280504] Adding 2543608k swap on /dev/sda2. Priority:-2 extents:1 across:2543608k
[ 18.132184] input: PS/2 Generic Mouse as /devices/platform/smb@8000000/smb@8000000:motherboard/smb@8000000:motherboard:iofpga@3,00000000/1c060000.kmi/serio0/input/input3
[ 18.256896] psmouse serio0: Failed to enable mouse on 1c060000.kmi
[ 19.369253] random: dd: uninitialized urandom read (512 bytes read)
[ 19.503090] random: ssh-keygen: uninitialized urandom read (32 bytes read)
[ 19.533868] random: sshd: uninitialized urandom read (32 bytes read)
[ 19.614518] sky2 0000:08:00.0 eth0: enabling interface
[ 24.632590] input: PS/2 Generic Mouse as /devices/platform/smb@8000000/smb@8000000:motherboard/smb@8000000:motherboard:iofpga@3,00000000/1c070000.kmi/serio1/input/input4
[ 24.756753] psmouse serio1: Failed to enable mouse on 1c070000.kmi
[ 77.066210] cfg80211: failed to load regulatory.db
[ 109.484923] PM: hibernation: hibernation entry
[ 109.505798] Filesystems sync: 0.003 seconds
[ 109.510720] Freezing user space processes ... (elapsed 0.004 seconds) done.
[ 109.522347] OOM killer disabled.
[ 109.535034] PM: hibernation: Preallocating image memory
[ 110.858314] PM: hibernation: Allocated 96587 pages for snapshot
[ 110.864358] PM: hibernation: Allocated 386348 kbytes in 1.31 seconds (294.92 MB/s)
[ 110.872058] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 110.883798] printk: Suspending console(s) (use no_console_suspend to debug)
[ 110.894359] ohci-platform 7ffb0000.ohci: ohci_platform_suspend : ret=0
[ 110.908778] usbcore:hub_suspend: hub 1-1:1.0: hub_suspend
[ 110.911448] usbcore:hub_suspend: hub 1-0:1.0: hub_suspend
[ 110.911588] usbcore:hcd_bus_suspend: usb usb1: bus suspend, wakeup 0
[ 110.942466] Disabling non-boot CPUs ...
[ 110.945799] CPU1: shutdown
[ 110.945826] psci: CPU1 killed (polled 0 ms)
[ 110.951729] CPU2: shutdown
[ 110.952840] psci: CPU2 killed (polled 4 ms)
[ 110.959068] CPU3: shutdown
[ 110.959097] psci: CPU3 killed (polled 0 ms)
[ 110.964518] CPU4: shutdown
[ 110.964547] psci: CPU4 killed (polled 0 ms)
[ 110.969407] CPU5: shutdown
[ 110.969434] psci: CPU5 killed (polled 0 ms)
[ 110.971466] PM: hibernation: Creating image:
[ 110.971466] PM: hibernation: Need to copy 95098 pages
[ 110.971466] PM: hibernation: Image created (95098 pages copied)
[ 110.972416] Enabling non-boot CPUs ...
[ 110.986470] Detected PIPT I-cache on CPU1
[ 110.986534] CPU1: Booted secondary processor 0x0000000000 [0x410fd080]
[ 110.989804] CPU1 is up
[ 111.003759] Detected PIPT I-cache on CPU2
[ 111.003798] CPU2: Booted secondary processor 0x0000000001 [0x410fd080]
[ 111.005181] CPU2 is up
[ 111.018850] Detected VIPT I-cache on CPU3
[ 111.018945] CPU3: Booted secondary processor 0x0000000101 [0x410fd033]
[ 111.022529] CPU3 is up
[ 111.036187] Detected VIPT I-cache on CPU4
[ 111.036263] CPU4: Booted secondary processor 0x0000000102 [0x410fd033]
[ 111.040050] CPU4 is up
[ 111.053709] Detected VIPT I-cache on CPU5
[ 111.053784] CPU5: Booted secondary processor 0x0000000103 [0x410fd033]
[ 111.058844] CPU5 is up
[ 111.080887] usbcore:hcd_bus_resume: usb usb1: usb resume
[ 111.084174] ohci-platform 7ffb0000.ohci: ohci_platform_resume
[ 111.111950] usbcore:hcd_bus_resume: usb usb2: usb resume
[ 111.138939] usbcore:hub_resume: hub 1-0:1.0: hub_resume
[ 111.139333] usbcore:hub_activate: usb usb1-port1: status 0503 change 0000
[ 111.139718] usbcore:hub_resume: hub 1-1:1.0: hub_resume
[ 111.140090] usbcore:hub_activate: usb 1-1-port1: status 0503 change 0000
[ 111.187608] usbcore:hub_resume: hub 2-0:1.0: hub_resume
[ 111.187893] usb usb2: runtime PM trying to activate child device usb2 but parent (7ffb0000.ohci) is not active
[ 111.187979] CPU: 3 PID: 369 Comm: kworker/u12:6 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545
[ 111.187994] Hardware name: ARM Juno development board (r2) (DT)
[ 111.188022] Workqueue: events_unbound async_run_entry_fn
[ 111.188041] Call trace:
[ 111.188060] dump_backtrace+0x0/0x1d8
[ 111.188077] show_stack+0x24/0x30
[ 111.188096] dump_stack+0xe8/0x150
[ 111.188116] __pm_runtime_set_status+0x1b8/0x2e8
[ 111.188135] usb_resume+0x64/0x88
[ 111.188152] usb_dev_thaw+0x24/0x30
[ 111.188170] dpm_run_callback+0x90/0x348
[ 111.188188] device_resume+0xe0/0x1c8
[ 111.188205] async_resume+0x30/0x60
[ 111.188223] async_run_entry_fn+0x48/0x1a8
[ 111.188242] process_one_work+0x2a4/0x748
[ 111.188259] worker_thread+0x48/0x498
[ 111.188276] kthread+0x13c/0x140
[ 111.188294] ret_from_fork+0x10/0x18
[ 111.473320] PM: Cannot find swap device, try swapon -a
[ 111.478559] PM: Cannot get swap writer
[ 111.740186] OOM killer enabled.
[ 111.743377] Restarting tasks ...
[ 111.744458] usbcore:hub_event: hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 111.744660] usbcore:hub_event: hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 111.744971] done.
[ 111.748289] usbcore:hub_event: hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 111.773192] usbcore:hub_resume: hub 2-0:1.0: hub_resume
[ 111.773249] PM: hibernation: hibernation exit
[ 111.779649] ------------[ cut here ]------------
[ 111.788382] URB (____ptrval____) submitted while active
[ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
[ 111.805417] Modules linked in:
[ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545
[ 111.817796] Hardware name: ARM Juno development board (r2) (DT)
[ 111.823896] Workqueue: usb_hub_wq hub_event
[ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 111.833156] pc : usb_submit_urb+0x3d8/0x590
[ 111.837471] lr : usb_submit_urb+0x3d8/0x590
[ 111.841783] sp : ffff800018de38b0
[ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003
[ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000
[ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38
[ 111.861635] x23: 0000000000000004 x22: 0000000000000c00
[ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0
[ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff
[ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8
[ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720
[ 111.889019] x13: 0720072007200720 x12: 0720072007200720
[ 111.894496] x11: 0000000000000000 x10: 00000000a5286134
[ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0
[ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570
[ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003
[ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118
[ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000
[ 111.927356] Call trace:
[ 111.929892] usb_submit_urb+0x3d8/0x590
[ 111.933852] hub_activate+0x108/0x7f0
[ 111.937633] hub_resume+0xac/0x148
[ 111.941149] usb_resume_interface.isra.10+0x60/0x138
[ 111.946265] usb_resume_both+0xe4/0x140
[ 111.950225] usb_runtime_resume+0x24/0x30
[ 111.954365] __rpm_callback+0xdc/0x138
[ 111.958236] rpm_callback+0x34/0x98
[ 111.961841] rpm_resume+0x4a8/0x720
[ 111.965445] rpm_resume+0x50c/0x720
[ 111.969049] __pm_runtime_resume+0x4c/0xb8
[ 111.973276] usb_autopm_get_interface+0x28/0x60
[ 111.977948] hub_event+0x80/0x16d8
[ 111.981466] process_one_work+0x2a4/0x748
[ 111.985604] worker_thread+0x48/0x498
[ 111.989387] kthread+0x13c/0x140
[ 111.992725] ret_from_fork+0x10/0x18
[ 111.996415] irq event stamp: 354
[ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8
[ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568
[ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150
[ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]---
[ 112.039119] hub 2-0:1.0: activate --> -16
[ 112.043367] usbcore:hub_event: hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 112.050825] usbcore:hub_suspend: hub 2-0:1.0: hub_suspend
[ 112.056596] usbcore:hcd_bus_suspend: usb usb2: bus auto-suspend, wakeup 1
[ 113.131730] ata1: SATA link down (SStatus 0 SControl 0)
[ 113.138068] ata2: SATA link down (SStatus 0 SControl 0)
[ 117.651706] psmouse serio0: Failed to enable mouse on 1c060000.kmi
[ 124.239499] psmouse serio1: Failed to enable mouse on 1c070000.kmi
\
 
 \ /
  Last update: 2020-03-25 16:01    [W:0.193 / U:2.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site