lkml.org 
[lkml]   [2020]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: tegra124-jetson-tk1: sata doesnt work since 5.2
From
Date

On 25/03/2020 13:40, LABBE Corentin wrote:
> On Thu, Mar 19, 2020 at 08:55:38AM +0100, Nicolas Chauvet wrote:
>> Le jeu. 19 mars 2020 à 08:44, LABBE Corentin <clabbe@baylibre.com> a écrit :
>>>
>>> Hello
>>>
>>> sata doesnt work on tegra124-jetson-tk1 on next and master and at least since 5.2 (but 5.1 works).
>>> [ 0.492810] +5V_SATA: supplied by +5V_SYS
>>> [ 0.493230] +12V_SATA: supplied by +VDD_MUX
>>> [ 2.088675] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
>>> [ 2.097643] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
>>> [ 3.314776] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
>>> [ 3.323658] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
>>> [ 5.236964] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
>>> [ 5.245867] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
>>> [ 5.254706] tegra-ahci 70027000.sata: 70027000.sata supply target not found, using dummy regulator
>>> [ 5.310270] phy phy-sata.6: phy poweron failed --> -110
>>> [ 5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
>>> [ 5.323022] tegra-ahci: probe of 70027000.sata failed with error -110
>>> [ 35.694269] +5V_SATA: disabling
>>> [ 35.697438] +12V_SATA: disabling
>>
>> It looks strange, because (on same device) , I have sata working as
>> appropriate, but ethernet fails with me.
>> https://bugzilla.kernel.org/show_bug.cgi?id=206217
>>
>> It might worth to have another report.
>>
>
> Hello
>
> Mine has ethernet works well. But I hit many problem with it and older kernel.
> Perhaps the 5.1.21, were I am stuck, does not have it.
>
> Anyway, the tegra of kerneci has the same SATA problem.
> https://storage.kernelci.org/next/master/next-20200325/arm/multi_v7_defconfig+CONFIG_SMP=n/gcc-8/lab-baylibre/boot-tegra124-jetson-tk1.txt
>
> Maintainers, any idea on this sata issue ?

I have checked our bootlogs for v5.6-rc7 and don't see the issue with
either the tegra_defconfig or the multi_v7_defconfig. I am wondering if
this could be due a difference in the bootloader version. Currently we
are testing with a v2019.07 u-boot bootloader. Looks like the kernelci
board is using an older u-boot. Obviously it should still work, but
would be good to know if the reason why were are not seeing this is
because of the bootloader.

Another thing to check would be the pll_e clock frequency on a working
build and non-working build to see if there is a difference in the pll
frequency that is causing this.

Cheers
Jon

--
nvpublic

\
 
 \ /
  Last update: 2020-03-25 15:01    [W:0.084 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site