lkml.org 
[lkml]   [2020]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 2/2] tty: add rpmsg driver
From
Date


On 3/24/20 6:23 PM, Joe Perches wrote:
> On Tue, 2020-03-24 at 18:04 +0100, Arnaud Pouliquen wrote:
>> This driver exposes a standard TTY interface on top of the rpmsg
>> framework through a rpmsg service.
>>
>> This driver supports multi-instances, offering a /dev/ttyRPMSGx entry
>> per rpmsg endpoint.
>
> trivial notes:
>
>> diff --git a/Documentation/serial/tty_rpmsg.rst b/Documentation/serial/tty_rpmsg.rst
> []
>> +The rpmsg tty driver implements serial communication on the RPMsg bus to makes possible for user-space programs to send and receive rpmsg messages as a standard tty protocol.
>
> Very long text lines missing newlines?
>
> []
>> +To be compliant with this driver, the remote firmware must create its data end point associated with the "rpmsg-tty-raw" service.
> []
>> +To be compatible with this driver, the remote firmware must create or use its end point associated with "rpmsg-tty-ctrl" service, plus a second endpoint for the data flow.
>> +On Linux rpmsg_tty probes, the data endpoint address and the CTS (set to disable)
>
> []
>
>> diff --git a/drivers/tty/rpmsg_tty.c b/drivers/tty/rpmsg_tty.c
> []
>> +typedef void (*rpmsg_tty_rx_cb_t)(struct rpmsg_device *, void *, int, void *,
>> + u32);
>
> unused typedef?

yes i will clean it.

>
> []
>
>> +static int __init rpmsg_tty_init(void)
>> +{
> []
>> + err = tty_register_driver(rpmsg_tty_driver);
>> + if (err < 0) {
>> + pr_err("Couldn't install rpmsg tty driver: err %d\n", err);
>> + goto error_put;
>> + }
>
> Might use vsprintf extension %pe
>
> pr_err("Couldn't install rpmsg tty driver: %pe\n", ERR_PTR(err));

Seems not possible here as err is an integer value and not a pointer cast to an integer,
or I missed something?


Thanks for the review,
Arnaud
>
>> + err = register_rpmsg_driver(&rpmsg_tty_rpmsg_drv);
>> + if (err < 0) {
>> + pr_err("Couldn't register rpmsg tty driver: err %d\n", err);
>
> etc.
>
>

\
 
 \ /
  Last update: 2020-03-25 12:37    [W:0.074 / U:10.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site