lkml.org 
[lkml]   [2020]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 6/7] net: qrtr: Add MHI transport layer
Hi Bjorn,

+ Chris Lew

On Tue, Mar 24, 2020 at 01:39:52PM -0700, Bjorn Andersson wrote:
> On Mon 23 Mar 23:10 PDT 2020, Manivannan Sadhasivam wrote:
>
> > MHI is the transport layer used for communicating to the external modems.
> > Hence, this commit adds MHI transport layer support to QRTR for
> > transferring the QMI messages over IPC Router.
> >
> > Cc: "David S. Miller" <davem@davemloft.net>
> > Cc: netdev@vger.kernel.org
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> > net/qrtr/Kconfig | 7 ++
> > net/qrtr/Makefile | 2 +
> > net/qrtr/mhi.c | 208 ++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 217 insertions(+)
> > create mode 100644 net/qrtr/mhi.c
> >
> > diff --git a/net/qrtr/Kconfig b/net/qrtr/Kconfig
> > index 63f89cc6e82c..8eb876471564 100644
> > --- a/net/qrtr/Kconfig
> > +++ b/net/qrtr/Kconfig
> > @@ -29,4 +29,11 @@ config QRTR_TUN
> > implement endpoints of QRTR, for purpose of tunneling data to other
> > hosts or testing purposes.
> >
> > +config QRTR_MHI
> > + tristate "MHI IPC Router channels"
> > + depends on MHI_BUS
> > + help
> > + Say Y here to support MHI based ipcrouter channels. MHI is the
> > + transport used for communicating to external modems.
> > +
> > endif # QRTR
> > diff --git a/net/qrtr/Makefile b/net/qrtr/Makefile
> > index 1c6d6c120fb7..3dc0a7c9d455 100644
> > --- a/net/qrtr/Makefile
> > +++ b/net/qrtr/Makefile
> > @@ -5,3 +5,5 @@ obj-$(CONFIG_QRTR_SMD) += qrtr-smd.o
> > qrtr-smd-y := smd.o
> > obj-$(CONFIG_QRTR_TUN) += qrtr-tun.o
> > qrtr-tun-y := tun.o
> > +obj-$(CONFIG_QRTR_MHI) += qrtr-mhi.o
> > +qrtr-mhi-y := mhi.o
> > diff --git a/net/qrtr/mhi.c b/net/qrtr/mhi.c
> > new file mode 100644
> > index 000000000000..90af208f34c1
> > --- /dev/null
> > +++ b/net/qrtr/mhi.c
> > @@ -0,0 +1,208 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
> > + */
> > +
> > +#include <linux/mhi.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/module.h>
> > +#include <linux/skbuff.h>
> > +#include <net/sock.h>
> > +
> > +#include "qrtr.h"
> > +
> > +struct qrtr_mhi_dev {
> > + struct qrtr_endpoint ep;
> > + struct mhi_device *mhi_dev;
> > + struct device *dev;
> > + spinlock_t ul_lock; /* lock to protect ul_pkts */
> > + struct list_head ul_pkts;
> > + atomic_t in_reset;
> > +};
> > +
> > +struct qrtr_mhi_pkt {
> > + struct list_head node;
> > + struct sk_buff *skb;
> > + struct kref refcount;
> > + struct completion done;
> > +};
> > +
> > +static void qrtr_mhi_pkt_release(struct kref *ref)
> > +{
> > + struct qrtr_mhi_pkt *pkt = container_of(ref, struct qrtr_mhi_pkt,
> > + refcount);
> > + struct sock *sk = pkt->skb->sk;
> > +
> > + consume_skb(pkt->skb);
> > + if (sk)
> > + sock_put(sk);
> > +
> > + kfree(pkt);
> > +}
> > +
> > +/* From MHI to QRTR */
> > +static void qcom_mhi_qrtr_dl_callback(struct mhi_device *mhi_dev,
> > + struct mhi_result *mhi_res)
> > +{
> > + struct qrtr_mhi_dev *qdev = dev_get_drvdata(&mhi_dev->dev);
> > + int rc;
> > +
> > + if (!qdev || mhi_res->transaction_status)
> > + return;
> > +
> > + rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr,
> > + mhi_res->bytes_xferd);
> > + if (rc == -EINVAL)
> > + dev_err(qdev->dev, "invalid ipcrouter packet\n");
>
> Perhaps this should be a debug print, perhaps rate limited. But either
> way it's relevant for any transport, so I think you should skip it here
> - and potentially move it into qrtr_endpoint_post() in some form.
>

I agree with moving this to qrtr_endpoint_post() but I don't think it is a
good idea to make it as a debug print. It is an error log and should stay
as it is. Only in this MHI transport driver, the return value is not getting
used but in others it is.

> > +}
> > +
> > +/* From QRTR to MHI */
> > +static void qcom_mhi_qrtr_ul_callback(struct mhi_device *mhi_dev,
> > + struct mhi_result *mhi_res)
> > +{
> > + struct qrtr_mhi_dev *qdev = dev_get_drvdata(&mhi_dev->dev);
> > + struct qrtr_mhi_pkt *pkt;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&qdev->ul_lock, flags);
> > + pkt = list_first_entry(&qdev->ul_pkts, struct qrtr_mhi_pkt, node);
> > + list_del(&pkt->node);
> > + complete_all(&pkt->done);
>
> You should be able to release the lock after popping the item off the
> list, then complete and refcount it.
>

Okay.

> > +
> > + kref_put(&pkt->refcount, qrtr_mhi_pkt_release);
> > + spin_unlock_irqrestore(&qdev->ul_lock, flags);
> > +}
> > +
> > +static void qcom_mhi_qrtr_status_callback(struct mhi_device *mhi_dev,
> > + enum mhi_callback mhi_cb)
> > +{
> > + struct qrtr_mhi_dev *qdev = dev_get_drvdata(&mhi_dev->dev);
> > + struct qrtr_mhi_pkt *pkt;
> > + unsigned long flags;
> > +
> > + if (mhi_cb != MHI_CB_FATAL_ERROR)
> > + return;
> > +
> > + atomic_inc(&qdev->in_reset);
>
> You have ul_lock close at hand in both places where you access in_reset,
> so I think it would be better to just use that, instead of an atomic.
>

Okay.

> > + spin_lock_irqsave(&qdev->ul_lock, flags);
> > + list_for_each_entry(pkt, &qdev->ul_pkts, node)
> > + complete_all(&pkt->done);

Chris, shouldn't we require list_del(&pkt->node) here?

> > + spin_unlock_irqrestore(&qdev->ul_lock, flags);
> > +}
> > +
> > +/* Send data over MHI */
> > +static int qcom_mhi_qrtr_send(struct qrtr_endpoint *ep, struct sk_buff *skb)
> > +{
> > + struct qrtr_mhi_dev *qdev = container_of(ep, struct qrtr_mhi_dev, ep);
> > + struct qrtr_mhi_pkt *pkt;
> > + int rc;
> > +
> > + rc = skb_linearize(skb);
> > + if (rc) {
> > + kfree_skb(skb);
> > + return rc;
> > + }
> > +
> > + pkt = kzalloc(sizeof(*pkt), GFP_KERNEL);
> > + if (!pkt) {
> > + kfree_skb(skb);
> > + return -ENOMEM;
> > + }
> > +
> > + init_completion(&pkt->done);
> > + kref_init(&pkt->refcount);
> > + kref_get(&pkt->refcount);
> > + pkt->skb = skb;
> > +
> > + spin_lock_bh(&qdev->ul_lock);
> > + list_add_tail(&pkt->node, &qdev->ul_pkts);
> > + rc = mhi_queue_skb(qdev->mhi_dev, DMA_TO_DEVICE, skb, skb->len,
> > + MHI_EOT);
>
> Do you want to continue doing this when qdev->in_reset? Wouldn't it be
> better to bail early if the remote end is dying?
>

Now I'm thinking why we are not decrementing in_reset anywhere! Incase of
SYS_ERR, the status_cb will get processed and in_reset will be set but
it will stay so even when after MHI gets reset.

Chris, can you please clarify?

> > + if (rc) {
> > + list_del(&pkt->node);
> > + /* Reference count needs to be dropped 2 times */
> > + kref_put(&pkt->refcount, qrtr_mhi_pkt_release);
> > + kref_put(&pkt->refcount, qrtr_mhi_pkt_release);
> > + kfree_skb(skb);
> > + spin_unlock_bh(&qdev->ul_lock);
> > + return rc;
> > + }
> > +
> > + spin_unlock_bh(&qdev->ul_lock);
> > + if (skb->sk)
> > + sock_hold(skb->sk);
> > +
> > + rc = wait_for_completion_interruptible_timeout(&pkt->done, HZ * 5);
> > + if (atomic_read(&qdev->in_reset))
> > + rc = -ECONNRESET;
> > + else if (rc == 0)
> > + rc = -ETIMEDOUT;
>
> Is this recoverable? The message will remain on the list and may be
> delivered at a later point(?), but qrtr and the app will learn that the
> message was lost - which is presumably considered fatal.
>
> Is it guaranteed that qcom_mhi_qrtr_ul_callback() will happen later and
> find the head of the list?
>

There are 2 scenarios:

1. If the completion interrupt happens after timeout, ul_callback()
will be called. But it will only try to fetch the current head of ul_pkts.
In most cases, we can hope that the completion interrupt will happen before
next queue_skb().

2. If we don't get completion interrupt, timeout will happen and at the final
stage (during mhi_driver_remove()), MHI stack will go over the pending TREs
for all channels in queue and call ul_callback() with -ENOTCONN. But in the
callback, we don't have any idea of the pkt which was not successfully
transferred to the device and currently just fetching first entry.

Now I'm seeing some issue here which I missed earlier. If the completion
interrupt never happens then the corresponding pkt will never get freed and
therefore we have a leak. Eventhough the ul_callback() will get called during
mhi_driver_remove() for pending TREs, we don't exactly fetch the right pkt.

Chris, our assumption of the ul_callback() gets called irrespective of
transfer status is wrong. I think this code needs a bit of rework.

>
> The reason for my question is that without this you have one of two
> scenarios;
> 1) the message is put on the list, decremented in
> qcom_mhi_qrtr_ul_callback() then we get back here and decrement it
> again.
> 2) the message is put on the list, then qcom_mhi_qrtr_status_callback()
> happens and all messages are released - presumably then
> qcom_mhi_qrtr_ul_callback() won't happen.
>
>
> So if the third case (where we return here and then later
> qcom_mhi_qrtr_ul_callback() must find this particular packet at the
> front of the queue) can't happen, then you can just skip the entire
> refcounting.
>
> Further more, you could carry qrtr_mhi_pkt on the stack.
>
>
> ...or to flip this around, is there a reason to wait here at all? What
> would happen if you just return immediately after calling
> mhi_queue_skb()? Wouldn't that provide you better throughput?
>

Chris would be best person to answer this question.

> > + else if (rc > 0)
> > + rc = 0;
> > +
> > + kref_put(&pkt->refcount, qrtr_mhi_pkt_release);
> > +
> > + return rc;
> > +}
> > +
> > +static int qcom_mhi_qrtr_probe(struct mhi_device *mhi_dev,
> > + const struct mhi_device_id *id)
> > +{
> > + struct qrtr_mhi_dev *qdev;
> > + u32 net_id;
> > + int rc;
> > +
> > + qdev = devm_kzalloc(&mhi_dev->dev, sizeof(*qdev), GFP_KERNEL);
> > + if (!qdev)
> > + return -ENOMEM;
> > +
> > + qdev->mhi_dev = mhi_dev;
> > + qdev->dev = &mhi_dev->dev;
> > + qdev->ep.xmit = qcom_mhi_qrtr_send;
> > + atomic_set(&qdev->in_reset, 0);
> > +
> > + net_id = QRTR_EP_NID_AUTO;
>
> Just pass QRTR_EP_NID_AUTO directly in the function call below.
>

Okay.

Thanks,
Mani

> Regards,
> Bjorn
>
> > +
> > + INIT_LIST_HEAD(&qdev->ul_pkts);
> > + spin_lock_init(&qdev->ul_lock);
> > +
> > + dev_set_drvdata(&mhi_dev->dev, qdev);
> > + rc = qrtr_endpoint_register(&qdev->ep, net_id);
> > + if (rc)
> > + return rc;
> > +
> > + dev_dbg(qdev->dev, "Qualcomm MHI QRTR driver probed\n");
> > +
> > + return 0;
> > +}
> > +
> > +static void qcom_mhi_qrtr_remove(struct mhi_device *mhi_dev)
> > +{
> > + struct qrtr_mhi_dev *qdev = dev_get_drvdata(&mhi_dev->dev);
> > +
> > + qrtr_endpoint_unregister(&qdev->ep);
> > + dev_set_drvdata(&mhi_dev->dev, NULL);
> > +}
> > +
> > +static const struct mhi_device_id qcom_mhi_qrtr_id_table[] = {
> > + { .chan = "IPCR" },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(mhi, qcom_mhi_qrtr_id_table);
> > +
> > +static struct mhi_driver qcom_mhi_qrtr_driver = {
> > + .probe = qcom_mhi_qrtr_probe,
> > + .remove = qcom_mhi_qrtr_remove,
> > + .dl_xfer_cb = qcom_mhi_qrtr_dl_callback,
> > + .ul_xfer_cb = qcom_mhi_qrtr_ul_callback,
> > + .status_cb = qcom_mhi_qrtr_status_callback,
> > + .id_table = qcom_mhi_qrtr_id_table,
> > + .driver = {
> > + .name = "qcom_mhi_qrtr",
> > + },
> > +};
> > +
> > +module_mhi_driver(qcom_mhi_qrtr_driver);
> > +
> > +MODULE_DESCRIPTION("Qualcomm IPC-Router MHI interface driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2020-03-25 11:39    [W:0.115 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site