lkml.org 
[lkml]   [2020]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 3/6] pinctrl: mediatek: avoid virtual gpio trying to set reg
Date
for virtual gpios, they should not do reg setting and
should behave as expected for eint function.

Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
---
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 28 ++++++++++++++++++++++
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 1 +
drivers/pinctrl/mediatek/pinctrl-paris.c | 7 ++++++
3 files changed, 36 insertions(+)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 20e1c89..087d233 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -226,6 +226,31 @@ static int mtk_xt_find_eint_num(struct mtk_pinctrl *hw, unsigned long eint_n)
return EINT_NA;
}

+/*
+ * Virtual GPIO only used inside SOC and not being exported to outside SOC.
+ * Some modules use virtual GPIO as eint (e.g. pmif or usb).
+ * In MTK platform, external interrupt (EINT) and GPIO is 1-1 mapping
+ * and we can set GPIO as eint.
+ * But some modules use specific eint which doesn't have real GPIO pin.
+ * So we use virtual GPIO to map it.
+ */
+
+bool mtk_is_virt_gpio(struct mtk_pinctrl *hw, unsigned int gpio_n)
+{
+ const struct mtk_pin_desc *desc;
+ bool virt_gpio = false;
+
+ if (gpio_n >= hw->soc->npins)
+ return virt_gpio;
+
+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n];
+
+ if (desc->funcs && !desc->funcs[desc->eint.eint_m].name)
+ virt_gpio = true;
+
+ return virt_gpio;
+}
+
static int mtk_xt_get_gpio_n(void *data, unsigned long eint_n,
unsigned int *gpio_n,
struct gpio_chip **gpio_chip)
@@ -278,6 +303,9 @@ static int mtk_xt_set_gpio_as_eint(void *data, unsigned long eint_n)
if (err)
return err;

+ if (mtk_is_virt_gpio(hw, gpio_n))
+ return 0;
+
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n];

err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE,
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
index 1b7da42..cda1c7a0 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
@@ -299,4 +299,5 @@ int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, u32 *val);

+bool mtk_is_virt_gpio(struct mtk_pinctrl *hw, unsigned int gpio_n);
#endif /* __PINCTRL_MTK_COMMON_V2_H */
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 923264d..7fba76d 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -693,6 +693,13 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
const struct mtk_pin_desc *desc;
int value, err;

+ /*
+ * "Virtual" GPIOs are always and only used for interrupts
+ * Since they are only used for interrupts, they are always inputs
+ */
+ if (mtk_is_virt_gpio(hw, gpio))
+ return 1;
+
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];

err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &value);
--
1.7.9.5
\
 
 \ /
  Last update: 2020-03-25 10:32    [W:0.111 / U:12.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site