lkml.org 
[lkml]   [2020]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v9 00/18] arm64: MMU enabled kexec relocation
    Date

    Changelog:
    v9: - 9 patches from previous series landed in upstream, so now series
    is smaller
    - Added two patches from James Morse to address idmap issues for machines
    with high physical addresses.
    - Addressed comments from Selin Dag about compiling issues. He also tested
    my series and got similar performance results: ~60 ms instead of ~580 ms
    with an initramfs size of ~120MB.
    v8:
    - Synced with mainline to keep series up-to-date
    v7:
    -- Addressed comments from James Morse
    - arm64: hibernate: pass the allocated pgdp to ttbr0
    Removed "Fixes" tag, and added Added Reviewed-by: James Morse
    - arm64: hibernate: check pgd table allocation
    Sent out as a standalone patch so it can be sent to stable
    Series applies on mainline + this patch
    - arm64: hibernate: add trans_pgd public functions
    Remove second allocation of tmp_pg_dir in swsusp_arch_resume
    Added Reviewed-by: James Morse <james.morse@arm.com>
    - arm64: kexec: move relocation function setup and clean up
    Fixed typo in commit log
    Changed kern_reloc to phys_addr_t types.
    Added explanation why kern_reloc is needed.
    Split into four patches:
    arm64: kexec: make dtb_mem always enabled
    arm64: kexec: remove unnecessary debug prints
    arm64: kexec: call kexec_image_info only once
    arm64: kexec: move relocation function setup
    - arm64: kexec: add expandable argument to relocation function
    Changed types of new arguments from unsigned long to phys_addr_t.
    Changed offset prefix to KEXEC_*
    Split into four patches:
    arm64: kexec: cpu_soft_restart change argument types
    arm64: kexec: arm64_relocate_new_kernel clean-ups
    arm64: kexec: arm64_relocate_new_kernel don't use x0 as temp
    arm64: kexec: add expandable argument to relocation function
    - arm64: kexec: configure trans_pgd page table for kexec
    Added invalid entries into EL2 vector table
    Removed KEXEC_EL2_VECTOR_TABLE_SIZE and KEXEC_EL2_VECTOR_TABLE_OFFSET
    Copy relocation functions and table into separate pages
    Changed types in kern_reloc_arg.
    Split into three patches:
    arm64: kexec: offset for relocation function
    arm64: kexec: kexec EL2 vectors
    arm64: kexec: configure trans_pgd page table for kexec
    - arm64: kexec: enable MMU during kexec relocation
    Split into two patches:
    arm64: kexec: enable MMU during kexec relocation
    arm64: kexec: remove head from relocation argument
    v6:
    - Sync with mainline tip
    - Added Acked's from Dave Young
    v5:
    - Addressed comments from Matthias Brugger: added review-by's, improved
    comments, and made cleanups to swsusp_arch_resume() in addition to
    create_safe_exec_page().
    - Synced with mainline tip.
    v4:
    - Addressed comments from James Morse.
    - Split "check pgd table allocation" into two patches, and moved to
    the beginning of series for simpler backport of the fixes.
    Added "Fixes:" tags to commit logs.
    - Changed "arm64, hibernate:" to "arm64: hibernate:"
    - Added Reviewed-by's
    - Moved "add PUD_SECT_RDONLY" earlier in series to be with other
    clean-ups
    - Added "Derived from:" to arch/arm64/mm/trans_pgd.c
    - Removed "flags" from trans_info
    - Changed .trans_alloc_page assumption to return zeroed page.
    - Simplify changes to trans_pgd_map_page(), by keeping the old
    code.
    - Simplify changes to trans_pgd_create_copy, by keeping the old
    code.
    - Removed: "add trans_pgd_create_empty"
    - replace init_mm with NULL, and keep using non "__" version of
    populate functions.
    v3:
    - Split changes to create_safe_exec_page() into several patches for
    easier review as request by Mark Rutland. This is why this series
    has 3 more patches.
    - Renamed trans_table to tans_pgd as agreed with Mark. The header
    comment in trans_pgd.c explains that trans stands for
    transitional page tables. Meaning they are used in transition
    between two kernels.
    v2:
    - Fixed hibernate bug reported by James Morse
    - Addressed comments from James Morse:
    * More incremental changes to trans_table
    * Removed TRANS_FORCEMAP
    * Added kexec reboot data for image with 380M in size.

    Enable MMU during kexec relocation in order to improve reboot performance.

    If kexec functionality is used for a fast system update, with a minimal
    downtime, the relocation of kernel + initramfs takes a significant portion
    of reboot.

    The reason for slow relocation is because it is done without MMU, and thus
    not benefiting from D-Cache.

    Performance data
    ----------------
    For this experiment, the size of kernel plus initramfs is small, only 25M.
    If initramfs was larger, than the improvements would be greater, as time
    spent in relocation is proportional to the size of relocation.

    Previously:
    kernel shutdown 0.022131328s
    relocation 0.440510736s
    kernel startup 0.294706768s

    Relocation was taking: 58.2% of reboot time

    Now:
    kernel shutdown 0.032066576s
    relocation 0.022158152s
    kernel startup 0.296055880s

    Now: Relocation takes 6.3% of reboot time

    Total reboot is x2.16 times faster.

    With bigger userland (fitImage 380M), the reboot time is improved by 3.57s,
    and is reduced from 3.9s down to 0.33s

    Previous approaches and discussions
    -----------------------------------
    https://lore.kernel.org/lkml/20191016200034.1342308-1-pasha.tatashin@soleen.com
    version 7 of this series

    https://lore.kernel.org/lkml/20191004185234.31471-1-pasha.tatashin@soleen.com
    version 6 of this series

    https://lore.kernel.org/lkml/20190923203427.294286-1-pasha.tatashin@soleen.com
    version 5 of this series

    https://lore.kernel.org/lkml/20190909181221.309510-1-pasha.tatashin@soleen.com
    version 4 of this series

    https://lore.kernel.org/lkml/20190821183204.23576-1-pasha.tatashin@soleen.com
    version 3 of this series

    https://lore.kernel.org/lkml/20190817024629.26611-1-pasha.tatashin@soleen.com
    version 2 of this series

    https://lore.kernel.org/lkml/20190801152439.11363-1-pasha.tatashin@soleen.com
    version 1 of this series

    https://lore.kernel.org/lkml/20190709182014.16052-1-pasha.tatashin@soleen.com
    reserve space for kexec to avoid relocation, involves changes to generic code
    to optimize a problem that exists on arm64 only:

    https://lore.kernel.org/lkml/20190716165641.6990-1-pasha.tatashin@soleen.com
    The first attempt to enable MMU, some bugs that prevented performance
    improvement. The page tables unnecessary configured idmap for the whole
    physical space.

    https://lore.kernel.org/lkml/20190731153857.4045-1-pasha.tatashin@soleen.com
    No linear copy, bug with EL2 reboots.

    James Morse (2):
    arm64: mm: Always update TCR_EL1 from __cpu_set_tcr_t0sz()
    arm64: trans_pgd: hibernate: idmap the single page that holds the copy
    page routines

    Pavel Tatashin (16):
    arm64: kexec: make dtb_mem always enabled
    arm64: hibernate: move page handling function to new trans_pgd.c
    arm64: trans_pgd: make trans_pgd_map_page generic
    arm64: trans_pgd: pass allocator trans_pgd_create_copy
    arm64: trans_pgd: pass NULL instead of init_mm to *_populate functions
    arm64: kexec: move relocation function setup
    arm64: kexec: call kexec_image_info only once
    arm64: kexec: cpu_soft_restart change argument types
    arm64: kexec: arm64_relocate_new_kernel clean-ups
    arm64: kexec: arm64_relocate_new_kernel don't use x0 as temp
    arm64: kexec: add expandable argument to relocation function
    arm64: kexec: offset for relocation function
    arm64: kexec: kexec EL2 vectors
    arm64: kexec: configure trans_pgd page table for kexec
    arm64: kexec: enable MMU during kexec relocation
    arm64: kexec: remove head from relocation argument

    arch/arm64/Kconfig | 4 +
    arch/arm64/include/asm/kexec.h | 45 +++-
    arch/arm64/include/asm/mmu_context.h | 7 +-
    arch/arm64/include/asm/trans_pgd.h | 38 ++++
    arch/arm64/kernel/asm-offsets.c | 15 ++
    arch/arm64/kernel/cpu-reset.S | 11 +-
    arch/arm64/kernel/cpu-reset.h | 14 +-
    arch/arm64/kernel/hibernate.c | 242 +++-------------------
    arch/arm64/kernel/machine_kexec.c | 161 ++++++++++++---
    arch/arm64/kernel/relocate_kernel.S | 246 +++++++++++++---------
    arch/arm64/mm/Makefile | 1 +
    arch/arm64/mm/trans_pgd.c | 293 +++++++++++++++++++++++++++
    12 files changed, 712 insertions(+), 365 deletions(-)
    create mode 100644 arch/arm64/include/asm/trans_pgd.h
    create mode 100644 arch/arm64/mm/trans_pgd.c

    --
    2.17.1

    \
     
     \ /
      Last update: 2020-03-26 04:25    [W:4.132 / U:0.632 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site