lkml.org 
[lkml]   [2020]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] remoteproc: fall back to using parent memory pool if no dedicated available
From
Date
Hi Mathieu,

On 3/25/20 3:38 PM, Mathieu Poirier wrote:
> On Thu, Mar 19, 2020 at 11:23:20AM -0500, Suman Anna wrote:
>> From: Tero Kristo <t-kristo@ti.com>
>>
>> In some cases, like with OMAP remoteproc, we are not creating dedicated
>> memory pool for the virtio device. Instead, we use the same memory pool
>> for all shared memories. The current virtio memory pool handling forces
>> a split between these two, as a separate device is created for it,
>> causing memory to be allocated from bad location if the dedicated pool
>> is not available. Fix this by falling back to using the parent device
>> memory pool if dedicated is not available.
>>
>> Fixes: 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool")
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> Signed-off-by: Suman Anna <s-anna@ti.com>
>> ---
>> v2:
>> - Address Arnaud's concerns about hard-coded memory-region index 0
>> - Update the comment around the new code addition
>> v1: https://patchwork.kernel.org/patch/11422721/
>>
>> drivers/remoteproc/remoteproc_virtio.c | 15 +++++++++++++++
>> include/linux/remoteproc.h | 2 ++
>> 2 files changed, 17 insertions(+)
>>
>> diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
>> index eb817132bc5f..b687715cdf4b 100644
>> --- a/drivers/remoteproc/remoteproc_virtio.c
>> +++ b/drivers/remoteproc/remoteproc_virtio.c
>> @@ -369,6 +369,21 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
>> goto out;
>> }
>> }
>> + } else {
>> + struct device_node *np = rproc->dev.parent->of_node;
>> +
>> + /*
>> + * If we don't have dedicated buffer, just attempt to re-assign
>> + * the reserved memory from our parent. A default memory-region
>> + * at index 0 from the parent's memory-regions is assigned for
>> + * the rvdev dev to allocate from, and this can be customized
>> + * by updating the vdevbuf_mem_id in platform drivers if
>> + * desired. Failure is non-critical and the allocations will
>> + * fall back to global pools, so don't check return value
>> + * either.
>
> I'm perplex... In the changelog it is indicated that if a memory pool is
> not dedicated allocation happens from a bad location but here failure of
> getting a hold of a dedicated memory pool is not critical.

So, the comment here is a generic one while the bad location part in the
commit description is actually from OMAP remoteproc usage perspective
(if you remember the dev_warn messages we added to the memory-region
parse logic in the driver).

Before the fixed-memory carveout support, all the DMA allocations in
remoteproc core were made from the rproc platform device's DMA pool (
which can be NULL). That is lost after the fixed-memory support, and
they were always allocated from global DMA pools if no dedicated pools
are used. After this patch, that continues to be case for drivers that
still do not use any dedicated pools, while it does restore the usage of
the platform device's DMA pool if a driver uses one (OMAP remoteproc
falls into the latter).

>
>> + */
>> + of_reserved_mem_device_init_by_idx(dev, np,
>> + rproc->vdevbuf_mem_id);
>
> I wonder if using an index setup by platform code is really the best way
> forward when we already have the carveout mechanic available to us. I see the
> platform code adding a carveout that would have the same name as rproc->name.
> From there in rproc_add_virtio_dev() we could have something like:
>
> mem = rproc_find_carveout_by_name(rproc, "%s", rproc->name);
>
>
> That would be very flexible, the location of the reserved memory withing the
> memory-region could change without fear of breaking things and no need to add to
> struct rproc.
>
> Let me know what you think.

I think that can work as well but I feel it is lot more cumbersome. It
does require every platform driver to add code adding/registering that
carveout, and parse the reserved memory region etc. End of the day, we
rely on DMA API and we just have to assign the region to the newly
created device. The DMA pool assignment for devices using
reserved-memory nodes has simply been the of_reserved_mem_device_init()
function.

regards
Suman

>
> Thanks,
> Mathieu
>
>> }
>>
>> /* Allocate virtio device */
>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>> index ed127b2d35ca..07bd73a6d72a 100644
>> --- a/include/linux/remoteproc.h
>> +++ b/include/linux/remoteproc.h
>> @@ -481,6 +481,7 @@ struct rproc_dump_segment {
>> * @auto_boot: flag to indicate if remote processor should be auto-started
>> * @dump_segments: list of segments in the firmware
>> * @nb_vdev: number of vdev currently handled by rproc
>> + * @vdevbuf_mem_id: default memory-region index for allocating vdev buffers
>> */
>> struct rproc {
>> struct list_head node;
>> @@ -514,6 +515,7 @@ struct rproc {
>> bool auto_boot;
>> struct list_head dump_segments;
>> int nb_vdev;
>> + u8 vdevbuf_mem_id;
>> u8 elf_class;
>> };
>>
>> --
>> 2.23.0
>>

\
 
 \ /
  Last update: 2020-03-26 00:39    [W:0.080 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site