lkml.org 
[lkml]   [2020]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] Add support to handle targets without TrustZone
Date
The iommu mapping for S2 SIDs are taken care by TrustZone.
For the targets which does not have the support of TrustZone,
these mappings need to be created in the driver using an
iommu domain.

Leaving these SIDs unconfigured will result in a global
smmu fault. Hence configuring them for Non-TrustZone targets
is mandatory.

Rakesh Pillai (3):
dt-bindings: ath10k: Add wifi-firmware subnode for wifi node
ath10k: Setup the msa resources before qmi init
ath10k: Add support for targets without trustzone

.../bindings/net/wireless/qcom,ath10k.txt | 14 ++
drivers/net/wireless/ath/ath10k/core.h | 5 +
drivers/net/wireless/ath/ath10k/qmi.c | 55 +------
drivers/net/wireless/ath/ath10k/qmi.h | 3 -
drivers/net/wireless/ath/ath10k/snoc.c | 170 ++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/snoc.h | 7 +
6 files changed, 200 insertions(+), 54 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2020-03-24 13:48    [W:0.063 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site