lkml.org 
[lkml]   [2020]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/13] usb: dwc3: meson-g12a: refactor usb2 phy init
Date
Refactor the USB2 PHY init code patch to handle the Amlogic GXL/GXM
not having the PHY mode control registers in the Glue but in the PHY
registers.

The Amlogic GXL/GXM will call phy_set_mode() instead of programming the
PHY mode control registers, thus add two new callbacks to the SoC match
data.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 78 +++++++++++++++++++++---------
1 file changed, 56 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 24a50dde685c..74d07ded8a7e 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -128,11 +128,21 @@ struct dwc3_meson_g12a_drvdata {
const char **phy_names;
int num_phys;
int (*setup_regmaps)(struct dwc3_meson_g12a *priv, void __iomem *base);
+ int (*usb2_init_phy)(struct dwc3_meson_g12a *priv, int i,
+ enum phy_mode mode);
+ int (*set_phy_mode)(struct dwc3_meson_g12a *priv, int i,
+ enum phy_mode mode);
};

static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
void __iomem *base);

+static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
+ enum phy_mode mode);
+
+static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv,
+ int i, enum phy_mode mode);
+
static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
.otg_switch_supported = true,
.clks = meson_g12a_clocks,
@@ -140,6 +150,8 @@ static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
.phy_names = meson_g12a_phy_names,
.num_phys = ARRAY_SIZE(meson_g12a_phy_names),
.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
+ .usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
+ .set_phy_mode = dwc3_meson_g12a_set_phy_mode,
};

static struct dwc3_meson_g12a_drvdata a1_drvdata = {
@@ -149,6 +161,8 @@ static struct dwc3_meson_g12a_drvdata a1_drvdata = {
.phy_names = meson_a1_phy_names,
.num_phys = ARRAY_SIZE(meson_a1_phy_names),
.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
+ .usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
+ .set_phy_mode = dwc3_meson_g12a_set_phy_mode,
};

struct dwc3_meson_g12a {
@@ -167,8 +181,8 @@ struct dwc3_meson_g12a {
const struct dwc3_meson_g12a_drvdata *drvdata;
};

-static void dwc3_meson_g12a_usb2_set_mode(struct dwc3_meson_g12a *priv,
- int i, enum phy_mode mode)
+static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv,
+ int i, enum phy_mode mode)
{
if (mode == PHY_MODE_USB_HOST)
regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
@@ -177,11 +191,41 @@ static void dwc3_meson_g12a_usb2_set_mode(struct dwc3_meson_g12a *priv,
else
regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
U2P_R0_HOST_DEVICE, 0);
+
+ return 0;
+}
+
+static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
+ enum phy_mode mode)
+{
+ int ret;
+
+ regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
+ U2P_R0_POWER_ON_RESET,
+ U2P_R0_POWER_ON_RESET);
+
+ if (priv->drvdata->otg_switch_supported && i == USB2_OTG_PHY) {
+ regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
+ U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,
+ U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS);
+
+ ret = priv->drvdata->set_phy_mode(priv, i, mode);
+ } else
+ ret = priv->drvdata->set_phy_mode(priv, i,
+ PHY_MODE_USB_HOST);
+
+ if (ret)
+ return ret;
+
+ regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
+ U2P_R0_POWER_ON_RESET, 0);
+
+ return 0;
}

static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
{
- int i;
+ int i, ret;

if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
priv->otg_phy_mode = PHY_MODE_USB_DEVICE;
@@ -195,23 +239,9 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
if (!strstr(priv->drvdata->phy_names[i], "usb2"))
continue;

- regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
- U2P_R0_POWER_ON_RESET,
- U2P_R0_POWER_ON_RESET);
-
- if (priv->drvdata->otg_switch_supported && i == USB2_OTG_PHY) {
- regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
- U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,
- U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS);
-
- dwc3_meson_g12a_usb2_set_mode(priv, i,
- priv->otg_phy_mode);
- } else
- dwc3_meson_g12a_usb2_set_mode(priv, i,
- PHY_MODE_USB_HOST);
-
- regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
- U2P_R0_POWER_ON_RESET, 0);
+ ret = priv->drvdata->usb2_init_phy(priv, i, mode);
+ if (ret)
+ return ret;
}

return 0;
@@ -364,7 +394,9 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,

priv->otg_phy_mode = mode;

- dwc3_meson_g12a_usb2_set_mode(priv, USB2_OTG_PHY, mode);
+ ret = priv->drvdata->set_phy_mode(priv, USB2_OTG_PHY, mode);
+ if (ret)
+ return ret;

dwc3_meson_g12a_usb_otg_apply_mode(priv);

@@ -580,7 +612,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
/* Get dr_mode */
priv->otg_mode = usb_get_dr_mode(dev);

- dwc3_meson_g12a_usb_init(priv);
+ ret = dwc3_meson_g12a_usb_init(priv);
+ if (ret)
+ goto err_disable_clks;

/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
--
2.22.0
\
 
 \ /
  Last update: 2020-03-24 11:21    [W:0.268 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site