lkml.org 
[lkml]   [2020]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()
Date
Nvidia card may come with a "phantom" UCSI device, and its driver gets
stuck in probe routine, prevents any system PM operations like suspend.

There's an unaccounted case that the target time can equal to jiffies in
gpu_i2c_check_status(), let's solve that by using readl_poll_timeout()
instead of jiffies comparison functions.

Fixes: c71bcdcb42a7 ("i2c: add i2c bus driver for NVIDIA GPU")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v3:
- Use readl_poll_timeout to make the retry loop simpler.

v2:
- Use a boolean to make sure the operation is timeout or not.

drivers/i2c/busses/i2c-nvidia-gpu.c | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 62e18b4db0ed..f5d25ce00f03 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -8,6 +8,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
@@ -75,20 +76,15 @@ static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd)

static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd)
{
- unsigned long target = jiffies + msecs_to_jiffies(1000);
u32 val;
+ int ret;

- do {
- val = readl(i2cd->regs + I2C_MST_CNTL);
- if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER))
- break;
- if ((val & I2C_MST_CNTL_STATUS) !=
- I2C_MST_CNTL_STATUS_BUS_BUSY)
- break;
- usleep_range(500, 600);
- } while (time_is_after_jiffies(target));
-
- if (time_is_before_jiffies(target)) {
+ ret = readl_poll_timeout(i2cd->regs + I2C_MST_CNTL, val,
+ !(val & I2C_MST_CNTL_CYCLE_TRIGGER) ||
+ (val & I2C_MST_CNTL_STATUS) != I2C_MST_CNTL_STATUS_BUS_BUSY,
+ 500, 1000 * USEC_PER_MSEC);
+
+ if (ret) {
dev_err(i2cd->dev, "i2c timeout error %x\n", val);
return -ETIMEDOUT;
}
--
2.17.1
\
 
 \ /
  Last update: 2020-03-24 16:28    [W:0.034 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site