lkml.org 
[lkml]   [2020]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] HID: logitech-dj: issue udev change event on device connection
From
Date
On Tue, 2020-03-24 at 15:03 +0100, Bastien Nocera wrote:
> On Tue, 2020-03-24 at 13:46 +0000, Filipe Laíns wrote:
> > On Tue, 2020-03-24 at 11:20 +0100, Bastien Nocera wrote:
> > > On Wed, 2020-03-18 at 19:27 +0000, Filipe Laíns wrote:
> > > > As discussed in the mailing list:
> > > >
> > > > > Right now the hid-logitech-dj driver will export one node for
> > > > > each
> > > > > connected device, even when the device is not connected. That
> > > > > causes
> > > > > some trouble because in userspace we don't have have any way to
> > > > > know if
> > > > > the device is connected or not, so when we try to communicate,
> > > > > if
> > > > > the
> > > > > device is disconnected it will fail.
> > >
> > > Why is it a problem that user-space communication fails? Note that
> > > sending a signal without any way to fetch the state means that it's
> > > always going to be racy.
> >
> > It failing is not the problem. The problem is knowing when the device
> > is available again. Right now the only way to do that is to listen
> > for
> > events or periodically ping it.
> >
> > We want to only export the HID++ hidraw node when the device is
> > available but that will take a while. We will have to test and sync
> > up
> > userspace. I also want to write tests for the driver before, to make
> > sure there are no regressions. We had a thread discussing this, IIRC
> > you were in CC.
>
> If I need to remember some old thread to know what we're talking about,
> then that means that the commit message is probably not good enough...

Should I put in the commit message what is planned next?

> Please add some links to the relevant discussion on bug forums if
> there's interesting data there too.

You can find the discussion in [1][2].

[1] https://www.spinics.net/lists/linux-input/thrd2.html#65615
[2] https://www.spinics.net/lists/linux-input/msg65615.html

> > > > The solution reached to solve this issue is to trigger an udev
> > > > change
> > > > event when the device connects, this way userspace can just wait
> > > > on
> > > > those connections instead of trying to ping the device.
> > > >
> > > > Signed-off-by: Filipe Laíns <lains@archlinux.org>
> > > >
> > > > ---
> > > >
> > > > v2:
> > > > - Issue udev change event on the connected hid device, not on
> > > > the
> > > > receiver
> > > >
> > > > ---
> > > > drivers/hid/hid-logitech-dj.c | 7 ++++++-
> > > > 1 file changed, 6 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-
> > > > logitech-dj.c
> > > > index 48dff5d6b605..282e57dd467d 100644
> > > > --- a/drivers/hid/hid-logitech-dj.c
> > > > +++ b/drivers/hid/hid-logitech-dj.c
> > > > @@ -1412,6 +1412,7 @@ static int logi_dj_dj_event(struct
> > > > hid_device
> > > > *hdev,
> > > > {
> > > > struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
> > > > struct dj_report *dj_report = (struct dj_report *) data;
> > > > + struct dj_device *dj_dev;
> > > > unsigned long flags;
> > > >
> > > > /*
> > > > @@ -1447,7 +1448,9 @@ static int logi_dj_dj_event(struct
> > > > hid_device
> > > > *hdev,
> > > >
> > > > spin_lock_irqsave(&djrcv_dev->lock, flags);
> > > >
> > > > - if (!djrcv_dev->paired_dj_devices[dj_report->device_index]) {
> > > > + dj_dev = djrcv_dev->paired_dj_devices[dj_report->device_index];
> > > > +
> > > > + if (!dj_dev) {
> > > > /* received an event for an unknown device, bail out */
> > > > logi_dj_recv_queue_notification(djrcv_dev, dj_report);
> > > > goto out;
> > > > @@ -1464,6 +1467,8 @@ static int logi_dj_dj_event(struct
> > > > hid_device
> > > > *hdev,
> > > > if (dj_report-
> > > > > report_params[CONNECTION_STATUS_PARAM_STATUS] ==
> > > > STATUS_LINKLOSS) {
> > > > logi_dj_recv_forward_null_report(djrcv_dev,
> > > > dj_report);
> > > > + } else {
> > > > + kobject_uevent(&dj_dev->hdev->dev.kobj,
> > > > KOBJ_CHANGE);
> > > > }
> > > > break;
> > > > default:
--
Filipe Laíns
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-03-24 15:11    [W:0.134 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site