lkml.org 
[lkml]   [2020]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v13 5/8] iio: adc: adi-axi-adc: add support for AXI ADC IP core
Date
From: Michael Hennerich <michael.hennerich@analog.com>

This change adds support for the Analog Devices Generic AXI ADC IP core.
The IP core is used for interfacing with analog-to-digital (ADC) converters
that require either a high-speed serial interface (JESD204B/C) or a source
synchronous parallel interface (LVDS/CMOS).

Usually, some other interface type (i.e SPI) is used as a control interface
for the actual ADC, while the IP core (controlled via this driver), will
interface to the data-lines of the ADC and handle the streaming of data
into memory via DMA.

Because of this, the AXI ADC driver needs the other SPI-ADC driver to
register with it. The SPI-ADC needs to be register via the SPI framework,
while the AXI ADC registers as a platform driver. The two cannot be ordered
in a hierarchy as both drivers have their own registers, and trying to
organize this [in a hierarchy becomes] problematic when trying to map
memory/registers.

There are some modes where the AXI ADC can operate as standalone ADC, but
those will be implemented at a later point in time.

DocLink: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/adc/Kconfig | 20 ++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/adi-axi-adc.c | 482 ++++++++++++++++++++++++++++
include/linux/iio/adc/adi-axi-adc.h | 64 ++++
4 files changed, 567 insertions(+)
create mode 100644 drivers/iio/adc/adi-axi-adc.c
create mode 100644 include/linux/iio/adc/adi-axi-adc.h

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index f4da821c4022..445070abf376 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -246,6 +246,26 @@ config AD799X
To compile this driver as a module, choose M here: the module will be
called ad799x.

+config ADI_AXI_ADC
+ tristate "Analog Devices Generic AXI ADC IP core driver"
+ select IIO_BUFFER
+ select IIO_BUFFER_HW_CONSUMER
+ select IIO_BUFFER_DMAENGINE
+ help
+ Say yes here to build support for Analog Devices Generic
+ AXI ADC IP core. The IP core is used for interfacing with
+ analog-to-digital (ADC) converters that require either a high-speed
+ serial interface (JESD204B/C) or a source synchronous parallel
+ interface (LVDS/CMOS).
+ Typically (for such devices) SPI will be used for configuration only,
+ while this IP core handles the streaming of data into memory via DMA.
+
+ Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called adi-axi-adc.
+
config ASPEED_ADC
tristate "Aspeed ADC"
depends on ARCH_ASPEED || COMPILE_TEST
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 8462455b4228..7c6594d049f9 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD7949) += ad7949.o
obj-$(CONFIG_AD799X) += ad799x.o
+obj-$(CONFIG_ADI_AXI_ADC) += adi-axi-adc.o
obj-$(CONFIG_ASPEED_ADC) += aspeed_adc.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
new file mode 100644
index 000000000000..e45b1e6d6836
--- /dev/null
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices Generic AXI ADC IP core
+ * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/buffer-dmaengine.h>
+
+#include <linux/fpga/adi-axi-common.h>
+#include <linux/iio/adc/adi-axi-adc.h>
+
+/**
+ * Register definitions:
+ * https://wiki.analog.com/resources/fpga/docs/axi_adc_ip#register_map
+ */
+
+/* ADC controls */
+
+#define ADI_AXI_REG_RSTN 0x0040
+#define ADI_AXI_REG_RSTN_CE_N BIT(2)
+#define ADI_AXI_REG_RSTN_MMCM_RSTN BIT(1)
+#define ADI_AXI_REG_RSTN_RSTN BIT(0)
+
+/* ADC Channel controls */
+
+#define ADI_AXI_REG_CHAN_CTRL(c) (0x0400 + (c) * 0x40)
+#define ADI_AXI_REG_CHAN_CTRL_LB_OWR BIT(11)
+#define ADI_AXI_REG_CHAN_CTRL_PN_SEL_OWR BIT(10)
+#define ADI_AXI_REG_CHAN_CTRL_IQCOR_EN BIT(9)
+#define ADI_AXI_REG_CHAN_CTRL_DCFILT_EN BIT(8)
+#define ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT BIT(6)
+#define ADI_AXI_REG_CHAN_CTRL_FMT_TYPE BIT(5)
+#define ADI_AXI_REG_CHAN_CTRL_FMT_EN BIT(4)
+#define ADI_AXI_REG_CHAN_CTRL_PN_TYPE_OWR BIT(1)
+#define ADI_AXI_REG_CHAN_CTRL_ENABLE BIT(0)
+
+#define ADI_AXI_REG_CHAN_CTRL_DEFAULTS \
+ (ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT | \
+ ADI_AXI_REG_CHAN_CTRL_FMT_EN | \
+ ADI_AXI_REG_CHAN_CTRL_ENABLE)
+
+struct adi_axi_adc_core_info {
+ unsigned int version;
+};
+
+struct adi_axi_adc_state {
+ struct mutex lock;
+
+ struct adi_axi_adc_client *client;
+ void __iomem *regs;
+};
+
+struct adi_axi_adc_client {
+ struct list_head entry;
+ struct adi_axi_adc_conv conv;
+ struct adi_axi_adc_state *state;
+ struct device *dev;
+ const struct adi_axi_adc_core_info *info;
+};
+
+static LIST_HEAD(registered_clients);
+static DEFINE_MUTEX(registered_clients_lock);
+
+static struct adi_axi_adc_client *conv_to_client(struct adi_axi_adc_conv *conv)
+{
+ return container_of(conv, struct adi_axi_adc_client, conv);
+}
+
+void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv)
+{
+ struct adi_axi_adc_client *cl = conv_to_client(conv);
+
+ return (char *)cl + ALIGN(sizeof(struct adi_axi_adc_client), IIO_ALIGN);
+}
+EXPORT_SYMBOL_GPL(adi_axi_adc_conv_priv);
+
+static void adi_axi_adc_write(struct adi_axi_adc_state *st,
+ unsigned int reg,
+ unsigned int val)
+{
+ iowrite32(val, st->regs + reg);
+}
+
+static unsigned int adi_axi_adc_read(struct adi_axi_adc_state *st,
+ unsigned int reg)
+{
+ return ioread32(st->regs + reg);
+}
+
+static int adi_axi_adc_config_dma_buffer(struct device *dev,
+ struct iio_dev *indio_dev)
+{
+ struct iio_buffer *buffer;
+ const char *dma_name;
+
+ if (!device_property_present(dev, "dmas"))
+ return 0;
+
+ if (device_property_read_string(dev, "dma-names", &dma_name))
+ dma_name = "rx";
+
+ buffer = devm_iio_dmaengine_buffer_alloc(indio_dev->dev.parent,
+ dma_name);
+ if (IS_ERR(buffer))
+ return PTR_ERR(buffer);
+
+ indio_dev->modes |= INDIO_BUFFER_HARDWARE;
+ iio_device_attach_buffer(indio_dev, buffer);
+
+ return 0;
+}
+
+static int adi_axi_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+
+ if (!conv->read_raw)
+ return -EOPNOTSUPP;
+
+ return conv->read_raw(conv, chan, val, val2, mask);
+}
+
+static int adi_axi_adc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+
+ if (!conv->write_raw)
+ return -EOPNOTSUPP;
+
+ return conv->write_raw(conv, chan, val, val2, mask);
+}
+
+static int adi_axi_adc_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+ unsigned int i, ctrl;
+
+ for (i = 0; i < conv->chip_info->num_channels; i++) {
+ ctrl = adi_axi_adc_read(st, ADI_AXI_REG_CHAN_CTRL(i));
+
+ if (test_bit(i, scan_mask))
+ ctrl |= ADI_AXI_REG_CHAN_CTRL_ENABLE;
+ else
+ ctrl &= ~ADI_AXI_REG_CHAN_CTRL_ENABLE;
+
+ adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i), ctrl);
+ }
+
+ return 0;
+}
+
+static struct adi_axi_adc_conv *adi_axi_adc_conv_register(struct device *dev,
+ size_t sizeof_priv)
+{
+ struct adi_axi_adc_client *cl;
+ size_t alloc_size;
+
+ alloc_size = ALIGN(sizeof(struct adi_axi_adc_client), IIO_ALIGN);
+ if (sizeof_priv)
+ alloc_size += ALIGN(sizeof_priv, IIO_ALIGN);
+
+ cl = kzalloc(alloc_size, GFP_KERNEL);
+ if (!cl)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(&registered_clients_lock);
+
+ cl->dev = get_device(dev);
+
+ list_add_tail(&cl->entry, &registered_clients);
+
+ mutex_unlock(&registered_clients_lock);
+
+ return &cl->conv;
+}
+
+static void adi_axi_adc_conv_unregister(struct adi_axi_adc_conv *conv)
+{
+ struct adi_axi_adc_client *cl = conv_to_client(conv);
+
+ mutex_lock(&registered_clients_lock);
+
+ list_del(&cl->entry);
+ put_device(cl->dev);
+
+ mutex_unlock(&registered_clients_lock);
+
+ kfree(cl);
+}
+
+static void devm_adi_axi_adc_conv_release(struct device *dev, void *res)
+{
+ adi_axi_adc_conv_unregister(*(struct adi_axi_adc_conv **)res);
+}
+
+struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev,
+ size_t sizeof_priv)
+{
+ struct adi_axi_adc_conv **ptr, *conv;
+
+ ptr = devres_alloc(devm_adi_axi_adc_conv_release, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+
+ conv = adi_axi_adc_conv_register(dev, sizeof_priv);
+ if (IS_ERR(conv)) {
+ devres_free(ptr);
+ return ERR_CAST(conv);
+ }
+
+ *ptr = conv;
+ devres_add(dev, ptr);
+
+ return conv;
+}
+EXPORT_SYMBOL_GPL(devm_adi_axi_adc_conv_register);
+
+static ssize_t in_voltage_scale_available_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+ size_t len = 0;
+ int i;
+
+ for (i = 0; i < conv->chip_info->num_scales; i++) {
+ const unsigned int *s = conv->chip_info->scale_table[i];
+
+ len += scnprintf(buf + len, PAGE_SIZE - len,
+ "%u.%06u ", s[0], s[1]);
+ }
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
+
+enum {
+ ADI_AXI_ATTR_SCALE_AVAIL,
+};
+
+#define ADI_AXI_ATTR(_en_, _file_) \
+ [ADI_AXI_ATTR_##_en_] = &iio_dev_attr_##_file_.dev_attr.attr
+
+static struct attribute *adi_axi_adc_attributes[] = {
+ ADI_AXI_ATTR(SCALE_AVAIL, in_voltage_scale_available),
+ NULL
+};
+
+static umode_t axi_adc_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct adi_axi_adc_state *st = iio_priv(indio_dev);
+ struct adi_axi_adc_conv *conv = &st->client->conv;
+
+ switch (n) {
+ case ADI_AXI_ATTR_SCALE_AVAIL:
+ if (!conv->chip_info->num_scales)
+ return 0;
+ return attr->mode;
+ default:
+ return attr->mode;
+ }
+}
+
+static const struct attribute_group adi_axi_adc_attribute_group = {
+ .attrs = adi_axi_adc_attributes,
+ .is_visible = axi_adc_attr_is_visible,
+};
+
+static const struct iio_info adi_axi_adc_info = {
+ .read_raw = &adi_axi_adc_read_raw,
+ .write_raw = &adi_axi_adc_write_raw,
+ .attrs = &adi_axi_adc_attribute_group,
+ .update_scan_mode = &adi_axi_adc_update_scan_mode,
+};
+
+static const struct adi_axi_adc_core_info adi_axi_adc_10_0_a_info = {
+ .version = ADI_AXI_PCORE_VER(10, 0, 'a'),
+};
+
+struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev)
+{
+ const struct adi_axi_adc_core_info *info;
+ struct adi_axi_adc_client *cl;
+ struct device_node *cln;
+
+ info = of_device_get_match_data(dev);
+ if (!info)
+ return ERR_PTR(-ENODEV);
+
+ cln = of_parse_phandle(dev->of_node, "adi,adc-dev", 0);
+ if (!cln) {
+ dev_err(dev, "No 'adi,adc-dev' node defined\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ mutex_lock(&registered_clients_lock);
+
+ list_for_each_entry(cl, &registered_clients, entry) {
+ if (!cl->dev)
+ continue;
+
+ if (cl->dev->of_node != cln)
+ continue;
+
+ if (!try_module_get(dev->driver->owner)) {
+ mutex_unlock(&registered_clients_lock);
+ return ERR_PTR(-ENODEV);
+ }
+
+ get_device(dev);
+ cl->info = info;
+ mutex_unlock(&registered_clients_lock);
+ return cl;
+ }
+
+ mutex_unlock(&registered_clients_lock);
+
+ return ERR_PTR(-EPROBE_DEFER);
+}
+
+static int adi_axi_adc_setup_channels(struct device *dev,
+ struct adi_axi_adc_state *st)
+{
+ struct adi_axi_adc_conv *conv = conv = &st->client->conv;
+ int i, ret;
+
+ if (conv->preenable_setup) {
+ ret = conv->preenable_setup(conv);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < conv->chip_info->num_channels; i++) {
+ adi_axi_adc_write(st, ADI_AXI_REG_CHAN_CTRL(i),
+ ADI_AXI_REG_CHAN_CTRL_DEFAULTS);
+ }
+
+ return 0;
+}
+
+static void axi_adc_reset(struct adi_axi_adc_state *st)
+{
+ adi_axi_adc_write(st, ADI_AXI_REG_RSTN, 0);
+ mdelay(10);
+ adi_axi_adc_write(st, ADI_AXI_REG_RSTN, ADI_AXI_REG_RSTN_MMCM_RSTN);
+ mdelay(10);
+ adi_axi_adc_write(st, ADI_AXI_REG_RSTN,
+ ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN);
+}
+
+static void adi_axi_adc_cleanup(void *data)
+{
+ struct adi_axi_adc_client *cl = data;
+
+ put_device(cl->dev);
+ module_put(cl->dev->driver->owner);
+}
+
+static int adi_axi_adc_probe(struct platform_device *pdev)
+{
+ struct adi_axi_adc_conv *conv;
+ struct iio_dev *indio_dev;
+ struct adi_axi_adc_client *cl;
+ struct adi_axi_adc_state *st;
+ unsigned int ver;
+ int ret;
+
+ cl = adi_axi_adc_attach_client(&pdev->dev);
+ if (IS_ERR(cl))
+ return PTR_ERR(cl);
+
+ ret = devm_add_action_or_reset(&pdev->dev, adi_axi_adc_cleanup, cl);
+ if (ret)
+ return ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ st->client = cl;
+ cl->state = st;
+ mutex_init(&st->lock);
+
+ st->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(st->regs))
+ return PTR_ERR(st->regs);
+
+ conv = &st->client->conv;
+
+ axi_adc_reset(st);
+
+ ver = adi_axi_adc_read(st, ADI_AXI_REG_VERSION);
+
+ if (cl->info->version > ver) {
+ dev_err(&pdev->dev,
+ "IP core version is too old. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
+ ADI_AXI_PCORE_VER_MAJOR(cl->info->version),
+ ADI_AXI_PCORE_VER_MINOR(cl->info->version),
+ ADI_AXI_PCORE_VER_PATCH(cl->info->version),
+ ADI_AXI_PCORE_VER_MAJOR(ver),
+ ADI_AXI_PCORE_VER_MINOR(ver),
+ ADI_AXI_PCORE_VER_PATCH(ver));
+ return -ENODEV;
+ }
+
+ indio_dev->info = &adi_axi_adc_info;
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = "adi-axi-adc";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->num_channels = conv->chip_info->num_channels;
+ indio_dev->channels = conv->chip_info->channels;
+
+ ret = adi_axi_adc_config_dma_buffer(&pdev->dev, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = adi_axi_adc_setup_channels(&pdev->dev, st);
+ if (ret)
+ return ret;
+
+ ret = devm_iio_device_register(&pdev->dev, indio_dev);
+ if (ret)
+ return ret;
+
+ dev_info(&pdev->dev, "AXI ADC IP core (%d.%.2d.%c) probed\n",
+ ADI_AXI_PCORE_VER_MAJOR(ver),
+ ADI_AXI_PCORE_VER_MINOR(ver),
+ ADI_AXI_PCORE_VER_PATCH(ver));
+
+ return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id adi_axi_adc_of_match[] = {
+ { .compatible = "adi,axi-adc-10.0.a", .data = &adi_axi_adc_10_0_a_info },
+ { /* end of list */ }
+};
+MODULE_DEVICE_TABLE(of, adi_axi_adc_of_match);
+
+static struct platform_driver adi_axi_adc_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = adi_axi_adc_of_match,
+ },
+ .probe = adi_axi_adc_probe,
+};
+module_platform_driver(adi_axi_adc_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices Generic AXI ADC IP core driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/adc/adi-axi-adc.h b/include/linux/iio/adc/adi-axi-adc.h
new file mode 100644
index 000000000000..c5d48e1c2d36
--- /dev/null
+++ b/include/linux/iio/adc/adi-axi-adc.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Analog Devices Generic AXI ADC IP core driver/library
+ * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ *
+ * Copyright 2012-2020 Analog Devices Inc.
+ */
+#ifndef __ADI_AXI_ADC_H__
+#define __ADI_AXI_ADC_H__
+
+struct device;
+struct iio_chan_spec;
+
+/**
+ * struct adi_axi_adc_chip_info - Chip specific information
+ * @name Chip name
+ * @id Chip ID (usually product ID)
+ * @channels Channel specifications of type @struct axi_adc_chan_spec
+ * @num_channels Number of @channels
+ * @scale_table Supported scales by the chip; tuples of 2 ints
+ * @num_scales Number of scales in the table
+ * @max_rate Maximum sampling rate supported by the device
+ */
+struct adi_axi_adc_chip_info {
+ const char *name;
+ unsigned int id;
+
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+
+ const unsigned int (*scale_table)[2];
+ int num_scales;
+
+ unsigned long max_rate;
+};
+
+/**
+ * struct adi_axi_adc_conv - data of the ADC attached to the AXI ADC
+ * @chip_info chip info details for the client ADC
+ * @preenable_setup op to run in the client before enabling the AXI ADC
+ * @reg_access IIO debugfs_reg_access hook for the client ADC
+ * @read_raw IIO read_raw hook for the client ADC
+ * @write_raw IIO write_raw hook for the client ADC
+ */
+struct adi_axi_adc_conv {
+ const struct adi_axi_adc_chip_info *chip_info;
+
+ int (*preenable_setup)(struct adi_axi_adc_conv *conv);
+ int (*reg_access)(struct adi_axi_adc_conv *conv, unsigned int reg,
+ unsigned int writeval, unsigned int *readval);
+ int (*read_raw)(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask);
+ int (*write_raw)(struct adi_axi_adc_conv *conv,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask);
+};
+
+struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev,
+ size_t sizeof_priv);
+
+void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv);
+
+#endif
--
2.17.1
\
 
 \ /
  Last update: 2020-03-24 14:49    [W:0.100 / U:4.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site