lkml.org 
[lkml]   [2020]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/7] x86: remove always-defined CONFIG_AS_CFI
On Sun, Mar 22, 2020 at 7:09 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> CONFIG_AS_CFI was introduced by commit e2414910f212 ("[PATCH] x86:
> Detect CFI support in the assembler at runtime"), and extended by
> commit f0f12d85af85 ("x86_64: Check for .cfi_rel_offset in CFI probe").
>
> We raise the minimal supported binutils version from time to time.
> The last bump was commit 1fb12b35e5ff ("kbuild: Raise the minimum
> required binutils version to 2.21").

Yep, looks like 2.21 was released in 2010, while CFI_rel_offset was
added to binutils back in 2003. LGTM, thanks for the patch (2 less
assembler invocations during a build).
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

>
> I confirmed the code in $(call as-instr,...) can be assembled by the
> binutils 2.21 assembler and also by LLVM integrated assembler.
>
> Remove CONFIG_AS_CFI, which is always defined.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> If this series is OK, we can do follwup cleanups.
> We can hard-code the assembler code, and delete CFI_* macros entirely.
>
>
> arch/x86/Makefile | 10 ++--------
> arch/x86/include/asm/dwarf2.h | 36 -----------------------------------
> 2 files changed, 2 insertions(+), 44 deletions(-)
>
> diff --git a/arch/x86/Makefile b/arch/x86/Makefile
> index 513a55562d75..72f8f744ebd7 100644
> --- a/arch/x86/Makefile
> +++ b/arch/x86/Makefile
> @@ -177,12 +177,6 @@ ifeq ($(ACCUMULATE_OUTGOING_ARGS), 1)
> KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args,)
> endif
>
> -# Stackpointer is addressed different for 32 bit and 64 bit x86
> -sp-$(CONFIG_X86_32) := esp
> -sp-$(CONFIG_X86_64) := rsp
> -
> -# do binutils support CFI?
> -cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
> # is .cfi_signal_frame supported too?
> cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
> cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
> @@ -196,8 +190,8 @@ sha1_ni_instr :=$(call as-instr,sha1msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA1_NI=
> sha256_ni_instr :=$(call as-instr,sha256msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA256_NI=1)
> adx_instr := $(call as-instr,adox %r10$(comma)%r10,-DCONFIG_AS_ADX=1)
>
> -KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
> -KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
> +KBUILD_AFLAGS += $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
> +KBUILD_CFLAGS += $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr) $(adx_instr)
>
> KBUILD_LDFLAGS := -m elf_$(UTS_MACHINE)
>
> diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
> index 5a0502212bc5..90807583cad7 100644
> --- a/arch/x86/include/asm/dwarf2.h
> +++ b/arch/x86/include/asm/dwarf2.h
> @@ -6,15 +6,6 @@
> #warning "asm/dwarf2.h should be only included in pure assembly files"
> #endif
>
> -/*
> - * Macros for dwarf2 CFI unwind table entries.
> - * See "as.info" for details on these pseudo ops. Unfortunately
> - * they are only supported in very new binutils, so define them
> - * away for older version.
> - */
> -
> -#ifdef CONFIG_AS_CFI
> -
> #define CFI_STARTPROC .cfi_startproc
> #define CFI_ENDPROC .cfi_endproc
> #define CFI_DEF_CFA .cfi_def_cfa
> @@ -55,31 +46,4 @@
> #endif
> #endif
>
> -#else
> -
> -/*
> - * Due to the structure of pre-exisiting code, don't use assembler line
> - * comment character # to ignore the arguments. Instead, use a dummy macro.
> - */
> -.macro cfi_ignore a=0, b=0, c=0, d=0
> -.endm
> -
> -#define CFI_STARTPROC cfi_ignore
> -#define CFI_ENDPROC cfi_ignore
> -#define CFI_DEF_CFA cfi_ignore
> -#define CFI_DEF_CFA_REGISTER cfi_ignore
> -#define CFI_DEF_CFA_OFFSET cfi_ignore
> -#define CFI_ADJUST_CFA_OFFSET cfi_ignore
> -#define CFI_OFFSET cfi_ignore
> -#define CFI_REL_OFFSET cfi_ignore
> -#define CFI_REGISTER cfi_ignore
> -#define CFI_RESTORE cfi_ignore
> -#define CFI_REMEMBER_STATE cfi_ignore
> -#define CFI_RESTORE_STATE cfi_ignore
> -#define CFI_UNDEFINED cfi_ignore
> -#define CFI_ESCAPE cfi_ignore
> -#define CFI_SIGNAL_FRAME cfi_ignore
> -
> -#endif
> -
> #endif /* _ASM_X86_DWARF2_H */
> --
> 2.17.1
>
> --
> You received this message because you are subscribed to the Google Groups "Clang Built Linux" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to clang-built-linux+unsubscribe@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/clang-built-linux/20200323020844.17064-3-masahiroy%40kernel.org.



--
Thanks,
~Nick Desaulniers

\
 
 \ /
  Last update: 2020-03-23 21:39    [W:0.144 / U:5.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site