lkml.org 
[lkml]   [2020]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] e1000e: bump up timeout to wait when ME un-configure ULP mode
Date
ME takes 2+ seconds to un-configure ULP mode done after resume
from s2idle on some ThinkPad laptops.
Without enough wait, reset and re-init will fail with error.

Fixes: f15bb6dde738cc8fa0 ("e1000e: Add support for S0ix")
BugLink: https://bugs.launchpad.net/bugs/1865570
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
---
drivers/net/ethernet/intel/e1000e/ich8lan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index b4135c50e905..147b15a2f8b3 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1240,9 +1240,9 @@ static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
ew32(H2ME, mac_reg);
}

- /* Poll up to 300msec for ME to clear ULP_CFG_DONE. */
+ /* Poll up to 2.5sec for ME to clear ULP_CFG_DONE. */
while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) {
- if (i++ == 30) {
+ if (i++ == 250) {
ret_val = -E1000_ERR_PHY;
goto out;
}
--
2.17.1
\
 
 \ /
  Last update: 2020-03-23 20:19    [W:0.169 / U:2.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site