[lkml]   [2020]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 5/6] gpio: dwapb: Add debounce reference clock support
On Mon, Mar 23, 2020 at 09:06:31PM +0300, wrote:
> From: Serge Semin <>
> Aside from the APB reference clock DW GPIO controller can have a
> dedicated clock connected to setup a debounce time interval for
> GPIO-based IRQs. Since this functionality is optional the corresponding
> clock source is also optional. Due to this lets handle the debounce
> clock in the same way as it has been developed for the APB reference
> clock, but using the bulk request/enable-disable methods.

> + if (err) {
> + dev_err(gpio->dev, "Cannot reenable APB/Debounce clocks\n");
> + return err;
> + }

Yeah, this should be a separate change.

Otherwise looks good.

Also, did I miss the documentation update (bindings)?

With Best Regards,
Andy Shevchenko

 \ /
  Last update: 2020-03-23 19:39    [W:0.145 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site