lkml.org 
[lkml]   [2020]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v7 06/10] net: phy: marvell10g: use phy_read_mmd_poll_timeout() to simplify the code
Date
use phy_read_mmd_poll_timeout() to replace the poll codes for
simplify mv3310_reset() function.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
---
v6 -> v7:
- adapt to a newly added parameter sleep_before_read.
v5 -> v6:
- no changed.
v4 -> v5:
- add msleep() to before call phy_read_mmd_poll_timeout()
to keep the code more similar.
v3 -> v4:
- add this patch by Andrew's suggestion. Thanks Andrew!


drivers/net/phy/marvell10g.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 7e05b92504f0..7621badae64d 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -241,22 +241,17 @@ static int mv3310_power_up(struct phy_device *phydev)

static int mv3310_reset(struct phy_device *phydev, u32 unit)
{
- int retries, val, err;
+ int val, err;

err = phy_modify_mmd(phydev, MDIO_MMD_PCS, unit + MDIO_CTRL1,
MDIO_CTRL1_RESET, MDIO_CTRL1_RESET);
if (err < 0)
return err;

- retries = 20;
- do {
- msleep(5);
- val = phy_read_mmd(phydev, MDIO_MMD_PCS, unit + MDIO_CTRL1);
- if (val < 0)
- return val;
- } while (val & MDIO_CTRL1_RESET && --retries);
-
- return val & MDIO_CTRL1_RESET ? -ETIMEDOUT : 0;
+ return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_PCS,
+ unit + MDIO_CTRL1, val,
+ !(val & MDIO_CTRL1_RESET),
+ 5000, 100000, true);
}

static int mv3310_get_edpd(struct phy_device *phydev, u16 *edpd)
--
2.25.0
\
 
 \ /
  Last update: 2020-03-23 16:09    [W:0.568 / U:6.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site