lkml.org 
[lkml]   [2020]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 09/11] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC
Alex Riesen, Mon, Mar 23, 2020 09:40:11 +0100:
> Geert Uytterhoeven, Mon, Mar 23, 2020 09:34:45 +0100:
> > On Fri, Mar 20, 2020 at 5:43 PM Alex Riesen <alexander.riesen@cetitec.com> wrote:
> > > As all known variants of the Salvator board have the HDMI decoder
> > > chip (the ADV7482) connected to the SSI4 on R-Car SoC, the ADV7482
> > > endpoint and the connection definitions are placed in the common board
> > > file.
> > > For the same reason, the CLK_C clock line and I2C configuration (similar
> > > to the ak4613, on the same interface) are added into the common file.
> > >
> > > Signed-off-by: Alexander Riesen <alexander.riesen@cetitec.com>
> > > Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
> >
> > Did I provide a Reviewed-by?
> >
> > > The driver provides only MCLK clock, not the SCLK and LRCLK,
> > > which are part of the I2S protocol.
> > >
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> >
> > Perhaps you mixed it up with Laurent's?
>
> Sorry. I actually did: he did provded Reviewed-by in his email, and you
> did not. I was ... a little overwhelmed.

It's even worse: even Laurent didn't provide his Reviewed-by for this
particular patch (it was bindings). Corrected.

Regards,
Alex

\
 
 \ /
  Last update: 2020-03-23 09:48    [W:0.055 / U:17.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site