lkml.org 
[lkml]   [2020]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v6 08/10] net: phy: use phy_read_poll_timeout() to simplify the code
Date
use phy_read_poll_timeout() to replace the poll codes for
simplify the code in phy_poll_reset() function.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
---
v5 -> v6:
- add some check for keep the code more similar.
v4 -> v5:
- it can add msleep before call phy_read_poll_timeout()
to keep the code more similar. so add it.
v3 -> v4:
- drop it.
v2 -> v3:
- adapt to it after modifying the parameter order of the
newly added function
v1 -> v2:
- remove the handle of phy_read()'s return error.

drivers/net/phy/phy_device.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a585faf8b844..eb1b177a9878 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1059,18 +1059,13 @@ EXPORT_SYMBOL(phy_disconnect);
static int phy_poll_reset(struct phy_device *phydev)
{
/* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
- unsigned int retries = 12;
- int ret;
-
- do {
- msleep(50);
- ret = phy_read(phydev, MII_BMCR);
- if (ret < 0)
- return ret;
- } while (ret & BMCR_RESET && --retries);
- if (ret & BMCR_RESET)
- return -ETIMEDOUT;
+ int ret, val;

+ msleep(50);
+ ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
+ 50000, 550000);
+ if (ret)
+ return ret;
/* Some chips (smsc911x) may still need up to another 1ms after the
* BMCR_RESET bit is cleared before they are usable.
*/
--
2.25.0
\
 
 \ /
  Last update: 2020-03-23 03:58    [W:0.062 / U:13.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site