lkml.org 
[lkml]   [2020]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net-next] net: dsa: Implement flow dissection for tag_brcm.c
On Sun, 22 Mar 2020 at 23:10, Florian Fainelli <f.fainelli@gmail.com> wrote:
>
> Provide a flow_dissect callback which returns the network offset and
> where to find the skb protocol, given the tags structure a common
> function works for both tagging formats that are supported.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---

Looks good to me.

> net/dsa/tag_brcm.c | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/net/dsa/tag_brcm.c b/net/dsa/tag_brcm.c
> index 9c3114179690..0d3f796d14a3 100644
> --- a/net/dsa/tag_brcm.c
> +++ b/net/dsa/tag_brcm.c
> @@ -142,6 +142,27 @@ static struct sk_buff *brcm_tag_rcv_ll(struct sk_buff *skb,
>
> return skb;
> }
> +
> +static int brcm_tag_flow_dissect(const struct sk_buff *skb, __be16 *proto,
> + int *offset)
> +{
> + /* We have been called on the DSA master network device after
> + * eth_type_trans() which pulled the Ethernet header already.
> + * Frames have one of these two layouts:
> + * -----------------------------------
> + * | MAC DA | MAC SA | 4b tag | Type | DSA_TAG_PROTO_BRCM
> + * -----------------------------------
> + * -----------------------------------
> + * | 4b tag | MAC DA | MAC SA | Type | DSA_TAG_PROTO_BRCM_PREPEND
> + * -----------------------------------
> + * skb->data points 2 bytes before the actual Ethernet type field and
> + * we have an offset of 4bytes between where skb->data and where the
> + * payload starts.
> + */
> + *offset = BRCM_TAG_LEN;
> + *proto = ((__be16 *)skb->data)[1];
> + return 0;
> +}
> #endif
>
> #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM)
> @@ -177,6 +198,7 @@ static const struct dsa_device_ops brcm_netdev_ops = {
> .xmit = brcm_tag_xmit,
> .rcv = brcm_tag_rcv,
> .overhead = BRCM_TAG_LEN,
> + .flow_dissect = brcm_tag_flow_dissect,
> };
>
> DSA_TAG_DRIVER(brcm_netdev_ops);
> @@ -205,6 +227,7 @@ static const struct dsa_device_ops brcm_prepend_netdev_ops = {
> .xmit = brcm_tag_xmit_prepend,
> .rcv = brcm_tag_rcv_prepend,
> .overhead = BRCM_TAG_LEN,
> + .flow_dissect = brcm_tag_flow_dissect,
> };
>
> DSA_TAG_DRIVER(brcm_prepend_netdev_ops);
> --
> 2.19.1
>

Regards,
-Vladimir

\
 
 \ /
  Last update: 2020-03-23 00:59    [W:0.423 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site