lkml.org 
[lkml]   [2020]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/1] i2c: iproc: generate stop event for slave writes
Date
When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP
event to i2c_client.

Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
---
drivers/i2c/busses/i2c-bcm-iproc.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 30efb7913b2e..b58224b7ba79 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -360,6 +360,9 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
i2c_slave_event(iproc_i2c->slave,
I2C_SLAVE_WRITE_RECEIVED, &value);
+ if (rx_status == I2C_SLAVE_RX_END)
+ i2c_slave_event(iproc_i2c->slave,
+ I2C_SLAVE_STOP, &value);
}
} else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
/* Master read other than start */
--
2.17.1
\
 
 \ /
  Last update: 2020-03-22 19:21    [W:0.078 / U:1.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site