lkml.org 
[lkml]   [2020]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: iio: accel: Add bmi088 accelerometer bindings
On Mon, 16 Mar 2020 07:52:18 +0100
Mike Looijmans <mike.looijmans@topic.nl> wrote:

> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> the accelerometer part.
>
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> ---
> .../devicetree/bindings/iio/accel/bmi088.txt | 23 +++++++++++++++++++

Sorry. All new DT bindings need to be in yaml format.

Please put this in the same series as the driver.

Thanks,

Jonathan

> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/accel/bmi088.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/bmi088.txt b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
> new file mode 100644
> index 000000000000..691a47726dbc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bmi088.txt
> @@ -0,0 +1,23 @@
> +* Bosch BMI088 IMU combining accelerometer and gyroscope
> +
> +https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> +
> +Required properties:
> +
> + - compatible : should be "bosch,bmi088_accel"
> + - reg : the I2C address of the sensor or the SPI chip select number
> +
> +Optional properties:
> +
> + - interrupts : interrupt mapping for GPIO IRQ, it should be configured with
> + IRQ_TYPE_EDGE_RISING
> +
> +Example:
> +
> +bmi088_accel@1 {
> + compatible = "bosch,bmi088_accel";
> + reg = <1>;
> + spi-max-frequency = <10000000>;
> + interrupt-parent = <&gpio>;
> + interrupts = <90 IRQ_TYPE_EDGE_RISING>;
> +};

\
 
 \ /
  Last update: 2020-03-22 18:37    [W:0.065 / U:7.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site