lkml.org 
[lkml]   [2020]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 13/13] iio: magn: bmc150: Use vsprintf extension %pe for symbolic error name
Date
Utilize %pe format specifier from vsprintf while printing error logs
with dev_err(). Discards the use of unnecessary explicit casting and
prints symbolic error name which might prove to be convenient during
debugging.

Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
---

Changes in v2:
- Rewrite commit subject line outlining the usage of %pe.
- Add a separator between regmap and its error name.

Based on conversations in [1] & [2].

[1] https://marc.info/?l=linux-iio&m=158427554607223&w=2
[2] https://marc.info/?l=linux-iio&m=158481647605891&w=2
---
drivers/iio/magnetometer/bmc150_magn_spi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c
index ed9be0490d77..c6ed3ea8460a 100644
--- a/drivers/iio/magnetometer/bmc150_magn_spi.c
+++ b/drivers/iio/magnetometer/bmc150_magn_spi.c
@@ -22,8 +22,8 @@ static int bmc150_magn_spi_probe(struct spi_device *spi)

regmap = devm_regmap_init_spi(spi, &bmc150_magn_regmap_config);
if (IS_ERR(regmap)) {
- dev_err(&spi->dev, "Failed to register spi regmap %d\n",
- (int)PTR_ERR(regmap));
+ dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+ regmap);
return PTR_ERR(regmap);
}
return bmc150_magn_probe(&spi->dev, regmap, spi->irq, id->name);
--
2.20.1
\
 
 \ /
  Last update: 2020-03-22 18:25    [W:0.100 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site