lkml.org 
[lkml]   [2020]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] i2c: at91: support atomic write xfer
On Sun, Mar 22, 2020 at 04:39:58AM +0300, Dmitry Osipenko wrote:
> 22.03.2020 00:03, Michał Mirosław пишет:
> > Implement basic support for atomic write - enough to get a simple
> > write to PMIC on shutdown. Only for chips having ALT_CMD register,
> > eg. SAMA5D2.
> >
> > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> > ---
> > v2: remove runtime-PM usage
> > switch to readl*poll*atomic() for transfer completion wait
> > ---
> > drivers/i2c/busses/i2c-at91-master.c | 69 +++++++++++++++++++++++++++-
> > 1 file changed, 67 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
> > index ba6fbb9c7390..d9226207157a 100644
> > --- a/drivers/i2c/busses/i2c-at91-master.c
> > +++ b/drivers/i2c/busses/i2c-at91-master.c
> > @@ -21,6 +21,7 @@
> > #include <linux/i2c.h>
> > #include <linux/interrupt.h>
> > #include <linux/io.h>
> > +#include <linux/iopoll.h>
> > #include <linux/of.h>
> > #include <linux/of_device.h>
> > #include <linux/platform_device.h>
> > @@ -709,6 +710,69 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
> > return ret;
> > }
> >
> > +static int at91_twi_xfer_atomic(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
> > +{
> > + struct at91_twi_dev *dev = i2c_get_adapdata(adap);
> > + unsigned long timeout;
> > + struct pinctrl *pins;
> > + __u32 stat;
> > + int ret;
> > +
> > + /* FIXME: only single write request supported to 7-bit addr */
> > + if (num != 1)
> > + return -EOPNOTSUPP;
> > + if (msg->flags & I2C_M_RD)
> > + return -EOPNOTSUPP;
> > + if (msg->flags & I2C_M_TEN)
> > + return -EOPNOTSUPP;
> > + if (msg->len > dev->fifo_size && msg->len > 1)
> > + return -EOPNOTSUPP;
> > + if (!dev->pdata->has_alt_cmd)
> > + return -EOPNOTSUPP;
> > +
> > + pins = pinctrl_get_select_default(&adap->dev);
> > +
> > + ret = clk_prepare_enable(twi_dev->clk);
>
> Hello Michał,
>
> Please see comments to the clk_prepare_enable() and clk_prepare().
>
> /* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
> static inline int clk_prepare_enable(struct clk *clk)
> ...
> * clk_prepare may sleep, which differentiates it from clk_enable.
>

Yes, it may. Though in this case unlikely. Even though clk_prepare()
takes a mutex, this is running only after there are no more processes
in the system, so there are no possible contenders.

Best Regards,
Michał Mirosław

\
 
 \ /
  Last update: 2020-03-22 17:37    [W:0.048 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site