lkml.org 
[lkml]   [2020]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 4/6] clk: Ingenic: Add CGU driver for X1830.
From
Date
Hi Paul,

On 2020年03月22日 20:49, Paul Cercueil wrote:
>
>
> Le dim. 22 mars 2020 à 20:30, Zhou Yanjie <zhouyanjie@wanyeetech.com>
> a écrit :
>> Hi Paul,
>>
>> On 2020年03月22日 20:08, Paul Cercueil wrote:
>>> Hi Zhou,
>>>
>>> Le dim. 22 mars 2020 à 16:21, 周琰杰 (Zhou Yanjie)
>>> <zhouyanjie@wanyeetech.com> a écrit :
>>>> Add support for the clocks provided by the CGU in the Ingenic X1830
>>>> SoC, making use of the cgu code to do the heavy lifting.
>>>>
>>>> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>>>> ---
>>>>
>>>> Notes:
>>>> v1->v2:
>>>> 1.Use two fields (pll_reg & bypass_reg) instead of the 2-values
>>>> array (reg[2]).
>>>> 2.Remove the "pll_info->version" and add a
>>>> "pll_info->rate_multiplier".
>>>> 3.Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@zoho.com>"
>>>> to "周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>" because
>>>> the old mailbox is in an unstable state.
>>>>
>>>> v2->v3:
>>>> Adjust order from [4/5] in v2 to [5/5] in v3.
>>>>
>>>> v3->v4:
>>>> Adjust order from [5/5] in v3 to [4/4] in v4.
>>>>
>>>> v4->v5:
>>>> Rebase on top of kernel 5.6-rc1.
>>>>
>>>> v5->v6:
>>>> Add missing part of X1830's CGU.
>>>>
>>>> drivers/clk/ingenic/Kconfig | 10 ++
>>>> drivers/clk/ingenic/Makefile | 1 +
>>>> drivers/clk/ingenic/x1830-cgu.c | 387
>>>> ++++++++++++++++++++++++++++++++++++++++
>>>> 3 files changed, 398 insertions(+)
>>>> create mode 100644 drivers/clk/ingenic/x1830-cgu.c
>>>>
>>>> diff --git a/drivers/clk/ingenic/Kconfig b/drivers/clk/ingenic/Kconfig
>>>> index b4555b4..580b0cf 100644
>>>> --- a/drivers/clk/ingenic/Kconfig
>>>> +++ b/drivers/clk/ingenic/Kconfig
>>>> @@ -55,6 +55,16 @@ config INGENIC_CGU_X1000
>>>>
>>>> If building for a X1000 SoC, you want to say Y here.
>>>>
>>>> +config INGENIC_CGU_X1830
>>>> + bool "Ingenic X1830 CGU driver"
>>>> + default MACH_X1830
>>>> + select INGENIC_CGU_COMMON
>>>> + help
>>>> + Support the clocks provided by the CGU hardware on Ingenic
>>>> X1830
>>>> + and compatible SoCs.
>>>> +
>>>> + If building for a X1830 SoC, you want to say Y here.
>>>> +
>>>> config INGENIC_TCU_CLK
>>>> bool "Ingenic JZ47xx TCU clocks driver"
>>>> default MACH_INGENIC
>>>> diff --git a/drivers/clk/ingenic/Makefile
>>>> b/drivers/clk/ingenic/Makefile
>>>> index 8b1dad9..aaa4bff 100644
>>>> --- a/drivers/clk/ingenic/Makefile
>>>> +++ b/drivers/clk/ingenic/Makefile
>>>> @@ -5,4 +5,5 @@ obj-$(CONFIG_INGENIC_CGU_JZ4725B) += jz4725b-cgu.o
>>>> obj-$(CONFIG_INGENIC_CGU_JZ4770) += jz4770-cgu.o
>>>> obj-$(CONFIG_INGENIC_CGU_JZ4780) += jz4780-cgu.o
>>>> obj-$(CONFIG_INGENIC_CGU_X1000) += x1000-cgu.o
>>>> +obj-$(CONFIG_INGENIC_CGU_X1830) += x1830-cgu.o
>>>> obj-$(CONFIG_INGENIC_TCU_CLK) += tcu.o
>>>> diff --git a/drivers/clk/ingenic/x1830-cgu.c
>>>> b/drivers/clk/ingenic/x1830-cgu.c
>>>> new file mode 100644
>>>> index 00000000..0bc927f
>>>> --- /dev/null
>>>> +++ b/drivers/clk/ingenic/x1830-cgu.c
>>>> @@ -0,0 +1,387 @@
>>>> +// SPDX-License-Identifier: GPL-2.0
>>>> +/*
>>>> + * X1830 SoC CGU driver
>>>> + * Copyright (c) 2019 周琰杰 (Zhou Yanjie)
>>>> <zhouyanjie@wanyeetech.com>
>>>> + */
>>>> +
>>>> +#include <linux/clk-provider.h>
>>>> +#include <linux/delay.h>
>>>> +#include <linux/of.h>
>>>> +#include <dt-bindings/clock/x1830-cgu.h>
>>>
>>> Please order the includes alphabetically (but with <> ones still
>>> before "" ones, and with a blank line between the two).
>>>
>>
>> Sure, seems the "x1000-cgu.c" also has this problem, I will fix both
>> in next version.
>>
>>>> +#include "cgu.h"
>>>> +#include "pm.h"
>>>> +
>>>> +/* CGU register offsets */
>>>> +#define CGU_REG_CPCCR 0x00
>>>> +#define CGU_REG_CPPCR 0x0c
>>>> +#define CGU_REG_APLL 0x10
>>>> +#define CGU_REG_MPLL 0x14
>>>> +#define CGU_REG_CLKGR0 0x20
>>>> +#define CGU_REG_OPCR 0x24
>>>> +#define CGU_REG_CLKGR1 0x28
>>>> +#define CGU_REG_DDRCDR 0x2c
>>>> +#define CGU_REG_USBPCR 0x3c
>>>> +#define CGU_REG_USBRDT 0x40
>>>> +#define CGU_REG_USBVBFIL 0x44
>>>> +#define CGU_REG_USBPCR1 0x48
>>>> +#define CGU_REG_MACCDR 0x54
>>>> +#define CGU_REG_EPLL 0x58
>>>> +#define CGU_REG_I2SCDR 0x60
>>>> +#define CGU_REG_LPCDR 0x64
>>>> +#define CGU_REG_MSC0CDR 0x68
>>>> +#define CGU_REG_I2SCDR1 0x70
>>>> +#define CGU_REG_SSICDR 0x74
>>>> +#define CGU_REG_CIMCDR 0x7c
>>>> +#define CGU_REG_MSC1CDR 0xa4
>>>> +#define CGU_REG_CMP_INTR 0xb0
>>>> +#define CGU_REG_CMP_INTRE 0xb4
>>>> +#define CGU_REG_DRCG 0xd0
>>>> +#define CGU_REG_CPCSR 0xd4
>>>> +#define CGU_REG_VPLL 0xe0
>>>> +#define CGU_REG_MACPHYC 0xe8
>>>> +
>>>> +/* bits within the OPCR register */
>>>> +#define OPCR_SPENDN0 BIT(7)
>>>> +#define OPCR_SPENDN1 BIT(6)
>>>> +
>>>> +static struct ingenic_cgu *cgu;
>>>
>>> I don't think you need this global variable at all.
>>>
>>
>> This variable will be used in x1830_cgu_init(), and it is also the
>> same in other cgu drivers of other Ingenic processors, I think we
>> should keep it.
>
> The "others do it that way" has never been a valid argument ;)
>
> It's used only in x1830_cgu_init(), so it should be a local variable
> within this function.
>

Sure, I'll move it into x1830_cgu_init() as a local variable.

> -Paul
>
>> Thanks and best regards!
>>
>>> -Paul
>>>
>>>> +
>>>> +static const s8 pll_od_encoding[64] = {
>>>> + 0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
>>>> + -1, -1, -1, -1, -1, -1, -1, 0x4,
>>>> + -1, -1, -1, -1, -1, -1, -1, -1,
>>>> + -1, -1, -1, -1, -1, -1, -1, 0x5,
>>>> + -1, -1, -1, -1, -1, -1, -1, -1,
>>>> + -1, -1, -1, -1, -1, -1, -1, -1,
>>>> + -1, -1, -1, -1, -1, -1, -1, -1,
>>>> + -1, -1, -1, -1, -1, -1, -1, 0x6,
>>>> +};
>>>> +
>>>> +static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
>>>> +
>>>> + /* External clocks */
>>>> +
>>>> + [X1830_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
>>>> + [X1830_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
>>>> +
>>>> + /* PLLs */
>>>> +
>>>> + [X1830_CLK_APLL] = {
>>>> + "apll", CGU_CLK_PLL,
>>>> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
>>>> + .pll = {
>>>> + .reg = CGU_REG_APLL,
>>>> + .rate_multiplier = 2,
>>>> + .m_shift = 20,
>>>> + .m_bits = 9,
>>>> + .m_offset = 1,
>>>> + .n_shift = 14,
>>>> + .n_bits = 6,
>>>> + .n_offset = 1,
>>>> + .od_shift = 11,
>>>> + .od_bits = 3,
>>>> + .od_max = 64,
>>>> + .od_encoding = pll_od_encoding,
>>>> + .bypass_reg = CGU_REG_CPPCR,
>>>> + .bypass_bit = 30,
>>>> + .enable_bit = 0,
>>>> + .stable_bit = 3,
>>>> + },
>>>> + },
>>>> +
>>>> + [X1830_CLK_MPLL] = {
>>>> + "mpll", CGU_CLK_PLL,
>>>> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
>>>> + .pll = {
>>>> + .reg = CGU_REG_MPLL,
>>>> + .rate_multiplier = 2,
>>>> + .m_shift = 20,
>>>> + .m_bits = 9,
>>>> + .m_offset = 1,
>>>> + .n_shift = 14,
>>>> + .n_bits = 6,
>>>> + .n_offset = 1,
>>>> + .od_shift = 11,
>>>> + .od_bits = 3,
>>>> + .od_max = 64,
>>>> + .od_encoding = pll_od_encoding,
>>>> + .bypass_reg = CGU_REG_CPPCR,
>>>> + .bypass_bit = 28,
>>>> + .enable_bit = 0,
>>>> + .stable_bit = 3,
>>>> + },
>>>> + },
>>>> +
>>>> + [X1830_CLK_EPLL] = {
>>>> + "epll", CGU_CLK_PLL,
>>>> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
>>>> + .pll = {
>>>> + .reg = CGU_REG_EPLL,
>>>> + .rate_multiplier = 2,
>>>> + .m_shift = 20,
>>>> + .m_bits = 9,
>>>> + .m_offset = 1,
>>>> + .n_shift = 14,
>>>> + .n_bits = 6,
>>>> + .n_offset = 1,
>>>> + .od_shift = 11,
>>>> + .od_bits = 3,
>>>> + .od_max = 64,
>>>> + .od_encoding = pll_od_encoding,
>>>> + .bypass_reg = CGU_REG_CPPCR,
>>>> + .bypass_bit = 24,
>>>> + .enable_bit = 0,
>>>> + .stable_bit = 3,
>>>> + },
>>>> + },
>>>> +
>>>> + [X1830_CLK_VPLL] = {
>>>> + "vpll", CGU_CLK_PLL,
>>>> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
>>>> + .pll = {
>>>> + .reg = CGU_REG_VPLL,
>>>> + .rate_multiplier = 2,
>>>> + .m_shift = 20,
>>>> + .m_bits = 9,
>>>> + .m_offset = 1,
>>>> + .n_shift = 14,
>>>> + .n_bits = 6,
>>>> + .n_offset = 1,
>>>> + .od_shift = 11,
>>>> + .od_bits = 3,
>>>> + .od_max = 64,
>>>> + .od_encoding = pll_od_encoding,
>>>> + .bypass_reg = CGU_REG_CPPCR,
>>>> + .bypass_bit = 26,
>>>> + .enable_bit = 0,
>>>> + .stable_bit = 3,
>>>> + },
>>>> + },
>>>> +
>>>> + /* Muxes & dividers */
>>>> +
>>>> + [X1830_CLK_SCLKA] = {
>>>> + "sclk_a", CGU_CLK_MUX,
>>>> + .parents = { -1, X1830_CLK_EXCLK, X1830_CLK_APLL, -1 },
>>>> + .mux = { CGU_REG_CPCCR, 30, 2 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_CPUMUX] = {
>>>> + "cpu_mux", CGU_CLK_MUX,
>>>> + .parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
>>>> + .mux = { CGU_REG_CPCCR, 28, 2 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_CPU] = {
>>>> + "cpu", CGU_CLK_DIV | CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
>>>> + .div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR1, 15 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_L2CACHE] = {
>>>> + "l2cache", CGU_CLK_DIV,
>>>> + .parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
>>>> + .div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_AHB0] = {
>>>> + "ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
>>>> + .parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
>>>> + .mux = { CGU_REG_CPCCR, 26, 2 },
>>>> + .div = { CGU_REG_CPCCR, 8, 1, 4, 21, -1, -1 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_AHB2PMUX] = {
>>>> + "ahb2_apb_mux", CGU_CLK_MUX,
>>>> + .parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
>>>> + .mux = { CGU_REG_CPCCR, 24, 2 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_AHB2] = {
>>>> + "ahb2", CGU_CLK_DIV,
>>>> + .parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
>>>> + .div = { CGU_REG_CPCCR, 12, 1, 4, 20, -1, -1 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_PCLK] = {
>>>> + "pclk", CGU_CLK_DIV | CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
>>>> + .div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR1, 14 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_DDR] = {
>>>> + "ddr", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
>>>> + .parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
>>>> + .mux = { CGU_REG_DDRCDR, 30, 2 },
>>>> + .div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
>>>> + .gate = { CGU_REG_CLKGR0, 31 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_MAC] = {
>>>> + "mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
>>>> + X1830_CLK_VPLL, X1830_CLK_EPLL },
>>>> + .mux = { CGU_REG_MACCDR, 30, 2 },
>>>> + .div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
>>>> + .gate = { CGU_REG_CLKGR1, 4 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_LCD] = {
>>>> + "lcd", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
>>>> + X1830_CLK_VPLL, X1830_CLK_EPLL },
>>>> + .mux = { CGU_REG_LPCDR, 30, 2 },
>>>> + .div = { CGU_REG_LPCDR, 0, 1, 8, 28, 27, 26 },
>>>> + .gate = { CGU_REG_CLKGR1, 9 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_MSCMUX] = {
>>>> + "msc_mux", CGU_CLK_MUX,
>>>> + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
>>>> + X1830_CLK_VPLL, X1830_CLK_EPLL },
>>>> + .mux = { CGU_REG_MSC0CDR, 30, 2 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_MSC0] = {
>>>> + "msc0", CGU_CLK_DIV | CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
>>>> + .div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
>>>> + .gate = { CGU_REG_CLKGR0, 4 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_MSC1] = {
>>>> + "msc1", CGU_CLK_DIV | CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
>>>> + .div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
>>>> + .gate = { CGU_REG_CLKGR0, 5 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_SSIPLL] = {
>>>> + "ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
>>>> + .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
>>>> + X1830_CLK_VPLL, X1830_CLK_EPLL },
>>>> + .mux = { CGU_REG_SSICDR, 30, 2 },
>>>> + .div = { CGU_REG_SSICDR, 0, 1, 8, 28, 27, 26 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_SSIPLL_DIV2] = {
>>>> + "ssi_pll_div2", CGU_CLK_FIXDIV,
>>>> + .parents = { X1830_CLK_SSIPLL },
>>>> + .fixdiv = { 2 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_SSIMUX] = {
>>>> + "ssi_mux", CGU_CLK_MUX,
>>>> + .parents = { X1830_CLK_EXCLK, X1830_CLK_SSIPLL_DIV2, -1,
>>>> -1 },
>>>> + .mux = { CGU_REG_SSICDR, 29, 1 },
>>>> + },
>>>> +
>>>> + /* Gate-only clocks */
>>>> +
>>>> + [X1830_CLK_EMC] = {
>>>> + "emc", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_AHB2, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 0 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_EFUSE] = {
>>>> + "efuse", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_AHB2, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 1 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_OTG] = {
>>>> + "otg", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 3 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_SSI0] = {
>>>> + "ssi0", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 6 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_SMB0] = {
>>>> + "smb0", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_PCLK, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 7 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_SMB1] = {
>>>> + "smb1", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_PCLK, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 8 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_SMB2] = {
>>>> + "smb2", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_PCLK, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 9 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_UART0] = {
>>>> + "uart0", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 14 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_UART1] = {
>>>> + "uart1", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 15 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_SSI1] = {
>>>> + "ssi1", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 19 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_SFC] = {
>>>> + "sfc", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_SSIPLL, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 20 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_PDMA] = {
>>>> + "pdma", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR0, 21 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_DTRNG] = {
>>>> + "dtrng", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_PCLK, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR1, 1 },
>>>> + },
>>>> +
>>>> + [X1830_CLK_OST] = {
>>>> + "ost", CGU_CLK_GATE,
>>>> + .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
>>>> + .gate = { CGU_REG_CLKGR1, 11 },
>>>> + },
>>>> +};
>>>> +
>>>> +static void __init x1830_cgu_init(struct device_node *np)
>>>> +{
>>>> + int retval;
>>>> +
>>>> + cgu = ingenic_cgu_new(x1830_cgu_clocks,
>>>> + ARRAY_SIZE(x1830_cgu_clocks), np);
>>>> + if (!cgu) {
>>>> + pr_err("%s: failed to initialise CGU\n", __func__);
>>>> + return;
>>>> + }
>>>> +
>>>> + retval = ingenic_cgu_register_clocks(cgu);
>>>> + if (retval) {
>>>> + pr_err("%s: failed to register CGU Clocks\n", __func__);
>>>> + return;
>>>> + }
>>>> +
>>>> + ingenic_cgu_register_syscore_ops(cgu);
>>>> +}
>>>> +CLK_OF_DECLARE_DRIVER(x1830_cgu, "ingenic,x1830-cgu",
>>>> x1830_cgu_init);
>>>> --
>>>> 2.7.4
>>>>
>>>
>>
>

\
 
 \ /
  Last update: 2020-03-22 14:00    [W:0.070 / U:6.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site