lkml.org 
[lkml]   [2020]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V3] block, bfq: fix use-after-free in bfq_idle_slice_timer_body
From
Date


> Il giorno 19 mar 2020, alle ore 12:18, Zhiqiang Liu <liuzhiqiang26@huawei.com> ha scritto:
>
>
> In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
> not in bfqd-lock critical section. The bfqq, which is not
> equal to NULL in bfq_idle_slice_timer, may be freed after passing
> to bfq_idle_slice_timer_body. So we will access the freed memory.
>
> In addition, considering the bfqq may be in race, we should
> firstly check whether bfqq is in service before doing something
> on it in bfq_idle_slice_timer_body func. If the bfqq in race is
> not in service, it means the bfqq has been expired through
> __bfq_bfqq_expire func, and wait_request flags has been cleared in
> __bfq_bfqd_reset_in_service func. So we do not need to re-clear the
> wait_request of bfqq which is not in service.
>

Acked-by: Paolo Valente <paolo.valente@linaro.org>

Thank you,
Paolo

> KASAN log is given as follows:
> [13058.354613] ==================================================================
> [13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
> [13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
> [13058.354646]
> [13058.354655] CPU: 96 PID: 19767 Comm: fork13
> [13058.354661] Call trace:
> [13058.354667] dump_backtrace+0x0/0x310
> [13058.354672] show_stack+0x28/0x38
> [13058.354681] dump_stack+0xd8/0x108
> [13058.354687] print_address_description+0x68/0x2d0
> [13058.354690] kasan_report+0x124/0x2e0
> [13058.354697] __asan_load8+0x88/0xb0
> [13058.354702] bfq_idle_slice_timer+0xac/0x290
> [13058.354707] __hrtimer_run_queues+0x298/0x8b8
> [13058.354710] hrtimer_interrupt+0x1b8/0x678
> [13058.354716] arch_timer_handler_phys+0x4c/0x78
> [13058.354722] handle_percpu_devid_irq+0xf0/0x558
> [13058.354731] generic_handle_irq+0x50/0x70
> [13058.354735] __handle_domain_irq+0x94/0x110
> [13058.354739] gic_handle_irq+0x8c/0x1b0
> [13058.354742] el1_irq+0xb8/0x140
> [13058.354748] do_wp_page+0x260/0xe28
> [13058.354752] __handle_mm_fault+0x8ec/0x9b0
> [13058.354756] handle_mm_fault+0x280/0x460
> [13058.354762] do_page_fault+0x3ec/0x890
> [13058.354765] do_mem_abort+0xc0/0x1b0
> [13058.354768] el0_da+0x24/0x28
> [13058.354770]
> [13058.354773] Allocated by task 19731:
> [13058.354780] kasan_kmalloc+0xe0/0x190
> [13058.354784] kasan_slab_alloc+0x14/0x20
> [13058.354788] kmem_cache_alloc_node+0x130/0x440
> [13058.354793] bfq_get_queue+0x138/0x858
> [13058.354797] bfq_get_bfqq_handle_split+0xd4/0x328
> [13058.354801] bfq_init_rq+0x1f4/0x1180
> [13058.354806] bfq_insert_requests+0x264/0x1c98
> [13058.354811] blk_mq_sched_insert_requests+0x1c4/0x488
> [13058.354818] blk_mq_flush_plug_list+0x2d4/0x6e0
> [13058.354826] blk_flush_plug_list+0x230/0x548
> [13058.354830] blk_finish_plug+0x60/0x80
> [13058.354838] read_pages+0xec/0x2c0
> [13058.354842] __do_page_cache_readahead+0x374/0x438
> [13058.354846] ondemand_readahead+0x24c/0x6b0
> [13058.354851] page_cache_sync_readahead+0x17c/0x2f8
> [13058.354858] generic_file_buffered_read+0x588/0xc58
> [13058.354862] generic_file_read_iter+0x1b4/0x278
> [13058.354965] ext4_file_read_iter+0xa8/0x1d8 [ext4]
> [13058.354972] __vfs_read+0x238/0x320
> [13058.354976] vfs_read+0xbc/0x1c0
> [13058.354980] ksys_read+0xdc/0x1b8
> [13058.354984] __arm64_sys_read+0x50/0x60
> [13058.354990] el0_svc_common+0xb4/0x1d8
> [13058.354994] el0_svc_handler+0x50/0xa8
> [13058.354998] el0_svc+0x8/0xc
> [13058.354999]
> [13058.355001] Freed by task 19731:
> [13058.355007] __kasan_slab_free+0x120/0x228
> [13058.355010] kasan_slab_free+0x10/0x18
> [13058.355014] kmem_cache_free+0x288/0x3f0
> [13058.355018] bfq_put_queue+0x134/0x208
> [13058.355022] bfq_exit_icq_bfqq+0x164/0x348
> [13058.355026] bfq_exit_icq+0x28/0x40
> [13058.355030] ioc_exit_icq+0xa0/0x150
> [13058.355035] put_io_context_active+0x250/0x438
> [13058.355038] exit_io_context+0xd0/0x138
> [13058.355045] do_exit+0x734/0xc58
> [13058.355050] do_group_exit+0x78/0x220
> [13058.355054] __wake_up_parent+0x0/0x50
> [13058.355058] el0_svc_common+0xb4/0x1d8
> [13058.355062] el0_svc_handler+0x50/0xa8
> [13058.355066] el0_svc+0x8/0xc
> [13058.355067]
> [13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
> [13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
> [13058.355077] The buggy address belongs to the page:
> [13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
> [13058.366175] flags: 0x2ffffe0000008100(slab|head)
> [13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780
> [13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000
> [13058.370789] page dumped because: kasan: bad access detected
> [13058.370791]
> [13058.370792] Memory state around the buggy address:
> [13058.370797] ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
> [13058.370801] ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> [13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> [13058.370808] ^
> [13058.370811] ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> [13058.370815] ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
> [13058.370817] ==================================================================
> [13058.370820] Disabling lock debugging due to kernel taint
>
> Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
> --
> V2->V3: rewrite the comment as suggested by Paolo Valente
> V1->V2: add one comment, and add Fixes and Reported-by tag.
>
> Fixes: aee69d78d ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
> Reported-by: Wang Wang <wangwang2@huawei.com>
> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
> Signed-off-by: Feilong Lin <linfeilong@huawei.com>
> ---
> block/bfq-iosched.c | 16 ++++++++++++----
> 1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
> index 8c436abfaf14..4a44c7f19435 100644
> --- a/block/bfq-iosched.c
> +++ b/block/bfq-iosched.c
> @@ -6215,20 +6215,28 @@ static struct bfq_queue *bfq_init_rq(struct request *rq)
> return bfqq;
> }
>
> -static void bfq_idle_slice_timer_body(struct bfq_queue *bfqq)
> +static void
> +bfq_idle_slice_timer_body(struct bfq_data *bfqd, struct bfq_queue *bfqq)
> {
> - struct bfq_data *bfqd = bfqq->bfqd;
> enum bfqq_expiration reason;
> unsigned long flags;
>
> spin_lock_irqsave(&bfqd->lock, flags);
> - bfq_clear_bfqq_wait_request(bfqq);
>
> + /*
> + * Considering that bfqq may be in race, we should firstly check
> + * whether bfqq is in service before doing something on it. If
> + * the bfqq in race is not in service, it has already been expired
> + * through __bfq_bfqq_expire func and its wait_request flags has
> + * been cleared in __bfq_bfqd_reset_in_service func.
> + */
> if (bfqq != bfqd->in_service_queue) {
> spin_unlock_irqrestore(&bfqd->lock, flags);
> return;
> }
>
> + bfq_clear_bfqq_wait_request(bfqq);
> +
> if (bfq_bfqq_budget_timeout(bfqq))
> /*
> * Also here the queue can be safely expired
> @@ -6273,7 +6281,7 @@ static enum hrtimer_restart bfq_idle_slice_timer(struct hrtimer *timer)
> * early.
> */
> if (bfqq)
> - bfq_idle_slice_timer_body(bfqq);
> + bfq_idle_slice_timer_body(bfqd, bfqq);
>
> return HRTIMER_NORESTART;
> }
> --
> 2.19.1
>
>

\
 
 \ /
  Last update: 2020-03-21 10:53    [W:0.058 / U:8.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site