lkml.org 
[lkml]   [2020]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
The function freq_qos_update_request returns 0 or 1 describing update
effectiveness, and a negative error code on failure. However,
cpufreq_set_cur_state returns 0 on success or an error code otherwise.

Signed-off-by: Willy Wolff <willy.mh.wolff.ml@gmail.com>
---
drivers/thermal/cpufreq_cooling.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c
index fe83d7a210d4..af55ac08e1bd 100644
--- a/drivers/thermal/cpufreq_cooling.c
+++ b/drivers/thermal/cpufreq_cooling.c
@@ -431,6 +431,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
unsigned long state)
{
struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+ int ret;

/* Request state should be less than max_level */
if (WARN_ON(state > cpufreq_cdev->max_level))
@@ -442,8 +443,9 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,

cpufreq_cdev->cpufreq_state = state;

- return freq_qos_update_request(&cpufreq_cdev->qos_req,
- get_state_freq(cpufreq_cdev, state));
+ ret = freq_qos_update_request(&cpufreq_cdev->qos_req,
+ get_state_freq(cpufreq_cdev, state));
+ return ret < 0 ? ret : 0;
}

/* Bind cpufreq callbacks to thermal cooling device ops */
--
2.20.1
\
 
 \ /
  Last update: 2020-03-21 10:28    [W:0.037 / U:2.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site